diff options
| -rw-r--r-- | drivers/spi/spi_bitbang.c | 77 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 8 | ||||
| -rw-r--r-- | include/linux/spi/spi_bitbang.h | 6 |
3 files changed, 77 insertions, 14 deletions
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index f037e5593269..0525c99118c3 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -138,6 +138,43 @@ static unsigned bitbang_txrx_32( return t->len - count; } +static int +bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + u8 bits_per_word; + u32 hz; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } else { + bits_per_word = 0; + hz = 0; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + if (bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* nsecs = (clock period)/2 */ + if (!hz) + hz = spi->max_speed_hz; + cs->nsecs = (1000000000/2) / hz; + if (cs->nsecs > MAX_UDELAY_MS * 1000) + return -EINVAL; + + return 0; +} + /** * spi_bitbang_setup - default setup for per-word I/O loops */ @@ -145,6 +182,7 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; + int retval; if (!spi->max_speed_hz) return -EINVAL; @@ -160,25 +198,14 @@ int spi_bitbang_setup(struct spi_device *spi) if (!spi->bits_per_word) spi->bits_per_word = 8; - /* spi_transfer level calls that work per-word */ - if (spi->bits_per_word <= 8) - cs->txrx_bufs = bitbang_txrx_8; - else if (spi->bits_per_word <= 16) - cs->txrx_bufs = bitbang_txrx_16; - else if (spi->bits_per_word <= 32) - cs->txrx_bufs = bitbang_txrx_32; - else - return -EINVAL; - /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; if (!cs->txrx_word) return -EINVAL; - /* nsecs = (clock period)/2 */ - cs->nsecs = (1000000000/2) / (spi->max_speed_hz); - if (cs->nsecs > MAX_UDELAY_MS * 1000) - return -EINVAL; + retval = bitbang_transfer_setup(spi, NULL); + if (retval < 0) + return retval; dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), @@ -246,6 +273,8 @@ static void bitbang_work(void *_bitbang) unsigned tmp; unsigned cs_change; int status; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -262,6 +291,7 @@ static void bitbang_work(void *_bitbang) tmp = 0; cs_change = 1; status = 0; + setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { if (bitbang->shutdown) { @@ -269,6 +299,20 @@ static void bitbang_work(void *_bitbang) break; } + /* override or restore speed and wordsize */ + if (t->speed_hz || t->bits_per_word) { + setup_transfer = bitbang->setup_transfer; + if (!setup_transfer) { + status = -ENOPROTOOPT; + break; + } + } + if (setup_transfer) { + status = setup_transfer(spi, t); + if (status < 0) + break; + } + /* set up default clock polarity, and activate chip; * this implicitly updates clock and spi modes as * previously recorded for this device via setup(). @@ -325,6 +369,10 @@ static void bitbang_work(void *_bitbang) m->status = status; m->complete(m->context); + /* restore speed and wordsize */ + if (setup_transfer) + setup_transfer(spi, NULL); + /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably * be for this chip too. @@ -406,6 +454,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; if (!bitbang->master->setup) { + bitbang->setup_transfer = bitbang_transfer_setup; bitbang->master->setup = spi_bitbang_setup; bitbang->master->cleanup = spi_bitbang_cleanup; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b05f1463a267..caa4665e3fa2 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -31,6 +31,7 @@ extern struct bus_type spi_bus_type; * @master: SPI controller used with the device. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. + * The spi_transfer.speed_hz can override this for each transfer. * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. @@ -38,6 +39,7 @@ extern struct bus_type spi_bus_type; * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. + * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state @@ -268,6 +270,10 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) + * @speed_hz: Select a speed other then the device default for this + * transfer. If 0 the default (from spi_device) is used. + * @bits_per_word: select a bits_per_word other then the device default + * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting @@ -322,7 +328,9 @@ struct spi_transfer { dma_addr_t rx_dma; unsigned cs_change:1; + u8 bits_per_word; u16 delay_usecs; + u32 speed_hz; struct list_head transfer_list; }; diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c961fe9bf3eb..c954557b757c 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -30,6 +30,12 @@ struct spi_bitbang { struct spi_master *master; + /* setup_transfer() changes clock and/or wordsize to match settings + * for this transfer; zeroes restore defaults from spi_device. + */ + int (*setup_transfer)(struct spi_device *spi, + struct spi_transfer *t); + void (*chipselect)(struct spi_device *spi, int is_on); #define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ #define BITBANG_CS_INACTIVE 0 |