diff options
| -rw-r--r-- | drivers/net/ps3_gelic_net.c | 45 | ||||
| -rw-r--r-- | drivers/net/ps3_gelic_net.h | 12 |
2 files changed, 44 insertions, 13 deletions
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index d596df987585..13d1c0a2a25f 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -917,31 +917,60 @@ static int gelic_net_decode_one_descr(struct gelic_net_card *card) goto refill; } - if ((status != GELIC_NET_DESCR_COMPLETE) && - (status != GELIC_NET_DESCR_FRAME_END)) { + if (status == GELIC_NET_DESCR_BUFFER_FULL) { + /* + * Buffer full would occur if and only if + * the frame length was longer than the size of this + * descriptor's buffer. If the frame length was equal + * to or shorter than buffer'size, FRAME_END condition + * would occur. + * Anyway this frame was longer than the MTU, + * just drop it. + */ + dev_info(ctodev(card), "overlength frame\n"); + goto refill; + } + /* + * descriptoers any other than FRAME_END here should + * be treated as error. + */ + if (status != GELIC_NET_DESCR_FRAME_END) { dev_dbg(ctodev(card), "RX descriptor with state %x\n", status); goto refill; } /* ok, we've got a packet in descr */ - gelic_net_pass_skb_up(descr, card); /* 1: skb_up sccess */ - + gelic_net_pass_skb_up(descr, card); refill: - descr->next_descr_addr = 0; /* unlink the descr */ + /* + * So that always DMAC can see the end + * of the descriptor chain to avoid + * from unwanted DMAC overrun. + */ + descr->next_descr_addr = 0; /* change the descriptor state: */ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE); - /* refill one desc - * FIXME: this can fail, but for now, just leave this - * descriptor without skb + /* + * this call can fail, but for now, just leave this + * decriptor without skb */ gelic_net_prepare_rx_descr(card, descr); + chain->head = descr; chain->tail = descr->next; + + /* + * Set this descriptor the end of the chain. + */ descr->prev->next_descr_addr = descr->bus_addr; + /* + * If dmac chain was met, DMAC stopped. + * thus re-enable it + */ if (dmac_chain_ended) { card->rx_dma_restart_required = 1; dev_dbg(ctodev(card), "reenable rx dma scheduled\n"); diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h index 01d729bc7332..a9c4c4fc2547 100644 --- a/drivers/net/ps3_gelic_net.h +++ b/drivers/net/ps3_gelic_net.h @@ -32,8 +32,8 @@ #define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */ #define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */ -#define GELIC_NET_MAX_MTU 2308 -#define GELIC_NET_MIN_MTU 64 +#define GELIC_NET_MAX_MTU VLAN_ETH_FRAME_LEN +#define GELIC_NET_MIN_MTU VLAN_ETH_ZLEN #define GELIC_NET_RXBUF_ALIGN 128 #define GELIC_NET_RX_CSUM_DEFAULT 1 /* hw chksum */ #define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ @@ -81,7 +81,8 @@ enum gelic_net_int1_status { */ #define GELIC_NET_RXVLNPKT 0x00200000 /* VLAN packet */ /* bit 20..16 reserved */ -#define GELIC_NET_RXRECNUM 0x0000ff00 /* reception receipt number */ +#define GELIC_NET_RXRRECNUM 0x0000ff00 /* reception receipt number */ +#define GELIC_NET_RXRRECNUM_SHIFT 8 /* bit 7..0 reserved */ #define GELIC_NET_TXDESC_TAIL 0 @@ -129,13 +130,14 @@ enum gelic_net_int1_status { enum gelic_net_descr_status { - GELIC_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */ + GELIC_NET_DESCR_COMPLETE = 0x00, /* used in tx */ + GELIC_NET_DESCR_BUFFER_FULL = 0x00, /* used in rx */ GELIC_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */ GELIC_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */ GELIC_NET_DESCR_FRAME_END = 0x04, /* used in rx */ GELIC_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */ GELIC_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */ - GELIC_NET_DESCR_NOT_IN_USE /* any other value */ + GELIC_NET_DESCR_NOT_IN_USE = 0x0b /* any other value */ }; /* for lv1_net_control */ #define GELIC_NET_GET_MAC_ADDRESS 0x0000000000000001 |