diff options
author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-10-28 18:47:48 +0300 |
---|---|---|
committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-10-29 15:55:56 +0300 |
commit | 26d95b6e300c4847be6ec8bfe817dbd531e94d9a (patch) | |
tree | bf5e2377f4b06c88988fd815e107795d54d13984 /sound/soc/s3c24xx/smdk64xx_wm8580.c | |
parent | 2845fa13e5cbe708ece7fafe29c91f32c66e4f59 (diff) | |
download | linux-26d95b6e300c4847be6ec8bfe817dbd531e94d9a.tar.xz |
ASoC: Minor SMDK64xx WM8580 cleanups
Fix up some comments, remove all enable_pin() calls (edge widgets
are all enabled by default) and mark the microphone as disabled by
default since it requires a resistor fit to connect it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/s3c24xx/smdk64xx_wm8580.c')
-rw-r--r-- | sound/soc/s3c24xx/smdk64xx_wm8580.c | 15 |
1 files changed, 5 insertions, 10 deletions
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c index 482aaf10eff6..cb8a9161b643 100644 --- a/sound/soc/s3c24xx/smdk64xx_wm8580.c +++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c @@ -103,7 +103,7 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* Set WM8580 to drive MCLK from it's PLLA */ + /* Set WM8580 to drive MCLK from its PLLA */ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK, WM8580_CLKSRC_PLLA); if (ret < 0) @@ -115,7 +115,6 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* Assuming the CODEC driver evaluates it's rfs too from this call */ ret = snd_soc_dai_set_pll(codec_dai, 0, WM8580_PLLA, SMDK64XX_WM8580_FREQ, pll_out); if (ret < 0) @@ -186,9 +185,10 @@ static int smdk64xx_wm8580_init_paiftx(struct snd_soc_codec *codec) /* Set up PAIFTX audio path */ snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx)); - /* All enabled by default */ - snd_soc_dapm_enable_pin(codec, "MicIn"); - snd_soc_dapm_enable_pin(codec, "LineIn"); + /* Enabling the microphone requires the fitting of a 0R + * resistor to connect the line from the microphone jack. + */ + snd_soc_dapm_disable_pin(codec, "MicIn"); /* signal a DAPM event */ snd_soc_dapm_sync(codec); @@ -205,11 +205,6 @@ static int smdk64xx_wm8580_init_paifrx(struct snd_soc_codec *codec) /* Set up PAIFRX audio path */ snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx)); - /* All enabled by default */ - snd_soc_dapm_enable_pin(codec, "Front-L/R"); - snd_soc_dapm_enable_pin(codec, "Center/Sub"); - snd_soc_dapm_enable_pin(codec, "Rear-L/R"); - /* signal a DAPM event */ snd_soc_dapm_sync(codec); |