Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 160 insertions, 0 deletions

diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
new file mode 100644
index 000000000000..c9c576b48556
--- /dev/null
+++ b/include/asm-mips/pci.h
@@ -0,0 +1,160 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/config.h>
+#include <linux/mm.h>
+
+#ifdef __KERNEL__
+
+/*
+ * This file essentially defines the interface between board
+ * specific PCI code and MIPS common PCI code.  Should potentially put
+ * into include/asm/pci.h file.
+ */
+
+#include <linux/ioport.h>
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+	struct pci_controller *next;
+	struct pci_bus *bus;
+
+	struct pci_ops *pci_ops;
+	struct resource *mem_resource;
+	unsigned long mem_offset;
+	struct resource *io_resource;
+	unsigned long io_offset;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	int iommu;
+};
+
+/*
+ * Used by boards to register their PCI busses before the actual scanning.
+ */
+extern struct pci_controller * alloc_pci_controller(void);
+extern void register_pci_controller(struct pci_controller *hose);
+
+/*
+ * board supplied pci irq fixup routine
+ */
+extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long PCIBIOS_MIN_IO;
+extern unsigned long PCIBIOS_MIN_MEM;
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * Dynamic DMA mapping stuff.
+ * MIPS has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/*
+ * The PCI address space does equal the physical memory address space.  The
+ * networking and block device layers use this boolean for bounce buffer
+ * decisions.  This is set if any hose does not have an IOMMU.
+ */
+extern unsigned int PCI_DMA_BUS_IS_PHYS;
+
+#ifdef CONFIG_MAPPED_DMA_IO
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* CONFIG_MAPPED_DMA_IO  */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_MAPPED_DMA_IO  */
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)	(1)
+
+extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
+	struct page *page, unsigned long offset, int direction);
+extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
+	dma64_addr_t dma_addr);
+extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
+	dma64_addr_t dma_addr);
+extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
+	dma64_addr_t dma_addr, size_t len, int direction);
+extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
+	dma64_addr_t dma_addr, size_t len, int direction);
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+	struct pci_bus_region *region, struct resource *res);
+
+#ifdef CONFIG_PCI_DOMAINS
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+#endif /* _ASM_PCI_H */