Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Remove quirk_via_abnormal_poweroff
  PCI: reset pci device state to unknown state for resume
  PCI: x86-64: mmconfig missing printk levels
  PCI: fix pci_fixup_video as it blows up on sparc64
  acpiphp: fix latch status

4 files changed, 19 insertions, 78 deletions

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index c44311ac2fd3..16167b016266 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1807,8 +1807,8 @@ u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
 
 
 /*
- * latch closed:  1
- * latch   open:  0
+ * latch   open:  1
+ * latch closed:  0
  */
 u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
 {
@@ -1816,7 +1816,7 @@ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot)
 
 	sta = get_slot_status(slot);
 
-	return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0;
+	return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1;
 }
 
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index b1c0c707d96c..194f1d21d3d7 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -265,6 +265,13 @@ static int pci_device_remove(struct device * dev)
 	}
 
 	/*
+	 * If the device is still on, set the power state as "unknown",
+	 * since it might change by the next time we load the driver.
+	 */
+	if (pci_dev->current_state == PCI_D0)
+		pci_dev->current_state = PCI_UNKNOWN;
+
+	/*
 	 * We would love to complain here if pci_dev->is_enabled is set, that
 	 * the driver should have called pci_disable_device(), but the
 	 * unfortunate fact is there are too many odd BIOS and bridge setups
@@ -288,6 +295,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
 		suspend_report_result(drv->suspend, i);
 	} else {
 		pci_save_state(pci_dev);
+		/*
+		 * mark its power state as "unknown", since we don't know if
+		 * e.g. the BIOS will change its device state when we suspend.
+		 */
+		if (pci_dev->current_state == PCI_D0)
+			pci_dev->current_state = PCI_UNKNOWN;
 	}
 	return i;
 }
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a7f1b1b2bc..204b1c8e972b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C597_0,	quirk_vt82c598_id );
 
-#ifdef CONFIG_ACPI_SLEEP
-
-/*
- * Some VIA systems boot with the abnormal status flag set. This can cause
- * the BIOS to re-POST the system on resume rather than passing control
- * back to the OS.  Clear the flag on boot
- */
-static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
-{
-	u32 reg;
-
-	acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
-				&reg);
-
-	if (reg & 0x800) {
-		printk("Clearing abnormal poweroff flag\n");
-		acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
-					ACPI_REGISTER_PM1_STATUS,
-					(u16)0x800);
-	}
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
-
-#endif
-
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to
@@ -1619,52 +1592,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
 
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
- */
-
-static void __devinit fixup_video(struct pci_dev *pdev)
-{
-	struct pci_dev *bridge;
-	struct pci_bus *bus;
-	u16 config;
-
-	if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
-		return;
-
-	/* Is VGA routed to us? */
-	bus = pdev->bus;
-	while (bus) {
-		bridge = bus->self;
-		if (bridge) {
-			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
-						&config);
-			if (!(config & PCI_BRIDGE_CTL_VGA))
-				return;
-		}
-		bus = bus->parent;
-	}
-	pci_read_config_word(pdev, PCI_COMMAND, &config);
-	if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
-		pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-		printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video);
-
-
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
 {
 	while (f < end) {
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 43e4a49f2cc4..e1dcefc69bb4 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -72,8 +72,9 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 	int last_image;
 
 	/*
-	 * IORESOURCE_ROM_SHADOW set if the VGA enable bit of the Bridge Control
-	 * register is set for embedded VGA.
+	 * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
+	 * memory map if the VGA enable bit of the Bridge Control register is
+	 * set for embedded VGA.
 	 */
 	if (res->flags & IORESOURCE_ROM_SHADOW) {
 		/* primary video rom always starts here */