summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorDmitry Torokhov <dtor@vmware.com>2011-03-24 08:41:23 +0300
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2011-04-14 03:19:48 +0400
commitdfa49c4ad120a784ef1ff0717168aa79f55a483a (patch)
treed8dc009e82608aa2935d95ab07f50d7d3e3b7d9a /drivers
parent926008c9386dde09b015753b6681c502177baa30 (diff)
downloadlinux-dfa49c4ad120a784ef1ff0717168aa79f55a483a.tar.xz
USB: xhci - fix math in xhci_get_endpoint_interval()
When parsing exponent-expressed intervals we subtract 1 from the value and then expect it to match with original + 1, which is highly unlikely, and we end with frequent spew: usb 3-4: ep 0x83 - rounding interval to 512 microframes Also, parsing interval for fullspeed isochronous endpoints was incorrect - according to USB spec they use exponent-based intervals (but xHCI spec claims frame-based intervals). I trust USB spec more, especially since USB core agrees with it. This should be queued for stable kernels back to 2.6.31. Reviewed-by: Micah Elizabeth Scott <micah@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/xhci-mem.c90
1 files changed, 62 insertions, 28 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 7f56c9b80692..627f3438028c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
return 0;
}
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval;
+
+ interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+ if (interval != ep->desc.bInterval - 1)
+ dev_warn(&udev->dev,
+ "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress,
+ 1 << interval);
+
+ return interval;
+}
+
+/*
+ * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval;
+
+ interval = fls(8 * ep->desc.bInterval) - 1;
+ interval = clamp_val(interval, 3, 10);
+ if ((1 << interval) != 8 * ep->desc.bInterval)
+ dev_warn(&udev->dev,
+ "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+ ep->desc.bEndpointAddress,
+ 1 << interval,
+ 8 * ep->desc.bInterval);
+
+ return interval;
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
@@ -991,45 +1032,38 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
case USB_SPEED_HIGH:
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
- usb_endpoint_xfer_bulk(&ep->desc))
+ usb_endpoint_xfer_bulk(&ep->desc)) {
interval = ep->desc.bInterval;
+ break;
+ }
/* Fall through - SS and HS isoc/int have same decoding */
+
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(&ep->desc) ||
- usb_endpoint_xfer_isoc(&ep->desc)) {
- if (ep->desc.bInterval == 0)
- interval = 0;
- else
- interval = ep->desc.bInterval - 1;
- if (interval > 15)
- interval = 15;
- if (interval != ep->desc.bInterval + 1)
- dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
- ep->desc.bEndpointAddress, 1 << interval);
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ interval = xhci_parse_exponent_interval(udev, ep);
}
break;
- /* Convert bInterval (in 1-255 frames) to microframes and round down to
- * nearest power of 2.
- */
+
case USB_SPEED_FULL:
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ interval = xhci_parse_exponent_interval(udev, ep);
+ break;
+ }
+ /*
+ * Fall through for isochronous endpoint interval decoding
+ * since it uses the same rules as low speed interrupt
+ * endpoints.
+ */
+
case USB_SPEED_LOW:
if (usb_endpoint_xfer_int(&ep->desc) ||
- usb_endpoint_xfer_isoc(&ep->desc)) {
- interval = fls(8*ep->desc.bInterval) - 1;
- if (interval > 10)
- interval = 10;
- if (interval < 3)
- interval = 3;
- if ((1 << interval) != 8*ep->desc.bInterval)
- dev_warn(&udev->dev,
- "ep %#x - rounding interval"
- " to %d microframes, "
- "ep desc says %d microframes\n",
- ep->desc.bEndpointAddress,
- 1 << interval,
- 8*ep->desc.bInterval);
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+
+ interval = xhci_parse_frame_interval(udev, ep);
}
break;
+
default:
BUG();
}