Merge tag 'tty-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver update for 4.18-rc1.

  There's nothing major here, just lots of serial driver updates. Full
  details are in the shortlog, nothing anything specific to call out
  here.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (55 commits)
  vt: Perform safe console erase only once
  serial: imx: disable UCR4_OREN on shutdown
  serial: imx: drop CTS/RTS handling from shutdown
  tty: fix typo in ASYNCB_FOURPORT comment
  serial: samsung: check DMA engine capabilities before using DMA mode
  tty: Fix data race in tty_insert_flip_string_fixed_flag
  tty: serial: msm_geni_serial: Fix TX infinite loop
  serial: 8250_dw: Fix runtime PM handling
  serial: 8250: omap: Fix idling of clocks for unused uarts
  tty: serial: drop ATH79 specific SoC symbols
  serial: 8250: Add missing rxtrig_bytes on Altera 16550 UART
  serial/aspeed-vuart: fix a couple mod_timer() calls
  serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
  serial: 8250_of: Add IO space support
  tty/serial: atmel: use port->name as name in request_irq()
  serial: imx: dma_unmap_sg buffers on shutdown
  serial: imx: cleanup imx_uart_disable_dma()
  tty: serial: qcom_geni_serial: Add early console support
  tty: serial: qcom_geni_serial: Return IRQ_NONE for spurious interrupts
  tty: serial: qcom_geni_serial: Use iowrite32_rep to write to FIFO
  ...

26 files changed, 681 insertions, 293 deletions

diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index 695439c03147..cf20616340a1 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -416,7 +416,7 @@ void ipwireless_network_packet_received(struct ipw_network *network,
 struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
 {
 	struct ipw_network *network =
-		kzalloc(sizeof(struct ipw_network), GFP_ATOMIC);
+		kzalloc(sizeof(struct ipw_network), GFP_KERNEL);
 
 	if (!network)
 		return NULL;
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1dbe27c9946c..86b7e20ffd7f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2675,7 +2675,7 @@ static inline void muxnet_put(struct gsm_mux_net *mux_net)
 	kref_put(&mux_net->ref, net_free);
 }
 
-static int gsm_mux_net_start_xmit(struct sk_buff *skb,
+static netdev_tx_t gsm_mux_net_start_xmit(struct sk_buff *skb,
 				      struct net_device *net)
 {
 	struct gsm_mux_net *mux_net = netdev_priv(net);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index b57b35066ebe..fed820e9ab9d 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -72,19 +72,19 @@ do {							\
 
 #define TMP_BUF_MAX 256
 
-#define DUMP(buf__,len__) \
-  do {  \
-    char tbuf[TMP_BUF_MAX] = {0};\
-    if (len__ > 1) {\
-	snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\
-	if (tbuf[len__-2] == '\r') {\
-		tbuf[len__-2] = 'r';\
-	} \
-	DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\
-    } else {\
-	DBG1("SENDING: '%s' (%d)", tbuf, len__);\
-    } \
-} while (0)
+#define DUMP(buf__, len__)						\
+	do {								\
+		char tbuf[TMP_BUF_MAX] = {0};				\
+		if (len__ > 1) {					\
+			u32 data_len = min_t(u32, len__, TMP_BUF_MAX);	\
+			strscpy(tbuf, buf__, data_len);			\
+			if (tbuf[data_len - 2] == '\r')			\
+				tbuf[data_len - 2] = 'r';		\
+			DBG1("SENDING: '%s' (%d+n)", tbuf, len__);	\
+		} else {						\
+			DBG1("SENDING: '%s' (%d)", tbuf, len__);	\
+		}							\
+	} while (0)
 
 /*    Defines */
 #define NOZOMI_NAME		"nozomi"
@@ -102,41 +102,41 @@ do {							\
 #define RECEIVE_BUF_MAX		4
 
 
-#define R_IIR		0x0000	/* Interrupt Identity Register */
-#define R_FCR		0x0000	/* Flow Control Register */
-#define R_IER		0x0004	/* Interrupt Enable Register */
+#define R_IIR			0x0000	/* Interrupt Identity Register */
+#define R_FCR			0x0000	/* Flow Control Register */
+#define R_IER			0x0004	/* Interrupt Enable Register */
 
 #define NOZOMI_CONFIG_MAGIC	0xEFEFFEFE
 #define TOGGLE_VALID		0x0000
 
 /* Definition of interrupt tokens */
-#define MDM_DL1		0x0001
-#define MDM_UL1		0x0002
-#define MDM_DL2		0x0004
-#define MDM_UL2		0x0008
-#define DIAG_DL1	0x0010
-#define DIAG_DL2	0x0020
-#define DIAG_UL		0x0040
-#define APP1_DL		0x0080
-#define APP1_UL		0x0100
-#define APP2_DL		0x0200
-#define APP2_UL		0x0400
-#define CTRL_DL		0x0800
-#define CTRL_UL		0x1000
-#define RESET		0x8000
-
-#define MDM_DL		(MDM_DL1  | MDM_DL2)
-#define MDM_UL		(MDM_UL1  | MDM_UL2)
-#define DIAG_DL		(DIAG_DL1 | DIAG_DL2)
+#define MDM_DL1			0x0001
+#define MDM_UL1			0x0002
+#define MDM_DL2			0x0004
+#define MDM_UL2			0x0008
+#define DIAG_DL1		0x0010
+#define DIAG_DL2		0x0020
+#define DIAG_UL			0x0040
+#define APP1_DL			0x0080
+#define APP1_UL			0x0100
+#define APP2_DL			0x0200
+#define APP2_UL			0x0400
+#define CTRL_DL			0x0800
+#define CTRL_UL			0x1000
+#define RESET			0x8000
+
+#define MDM_DL			(MDM_DL1  | MDM_DL2)
+#define MDM_UL			(MDM_UL1  | MDM_UL2)
+#define DIAG_DL			(DIAG_DL1 | DIAG_DL2)
 
 /* modem signal definition */
-#define CTRL_DSR	0x0001
-#define CTRL_DCD	0x0002
-#define CTRL_RI		0x0004
-#define CTRL_CTS	0x0008
+#define CTRL_DSR		0x0001
+#define CTRL_DCD		0x0002
+#define CTRL_RI			0x0004
+#define CTRL_CTS		0x0008
 
-#define CTRL_DTR	0x0001
-#define CTRL_RTS	0x0002
+#define CTRL_DTR		0x0001
+#define CTRL_RTS		0x0002
 
 #define MAX_PORT		4
 #define NOZOMI_MAX_PORTS	5
@@ -155,7 +155,7 @@ enum card_type {
 
 /* Initialization states a card can be in */
 enum card_state {
-	NOZOMI_STATE_UKNOWN	= 0,
+	NOZOMI_STATE_UNKNOWN	= 0,
 	NOZOMI_STATE_ENABLED	= 1,	/* pci device enabled */
 	NOZOMI_STATE_ALLOCATED	= 2,	/* config setup done */
 	NOZOMI_STATE_READY	= 3,	/* flowcontrols received */
@@ -365,7 +365,7 @@ struct buffer {
 	u8 *data;
 } __attribute__ ((packed));
 
-/*    Global variables */
+/* Global variables */
 static const struct pci_device_id nozomi_pci_tbl[] = {
 	{PCI_DEVICE(0x1931, 0x000c)},	/* Nozomi HSDPA */
 	{},
@@ -1686,12 +1686,12 @@ static int ntty_tiocmget(struct tty_struct *tty)
 
 	/* Note: these could change under us but it is not clear this
 	   matters if so */
-	return	(ctrl_ul->RTS ? TIOCM_RTS : 0) |
-		(ctrl_ul->DTR ? TIOCM_DTR : 0) |
-		(ctrl_dl->DCD ? TIOCM_CAR : 0) |
-		(ctrl_dl->RI  ? TIOCM_RNG : 0) |
-		(ctrl_dl->DSR ? TIOCM_DSR : 0) |
-		(ctrl_dl->CTS ? TIOCM_CTS : 0);
+	return (ctrl_ul->RTS ? TIOCM_RTS : 0)
+		| (ctrl_ul->DTR ? TIOCM_DTR : 0)
+		| (ctrl_dl->DCD ? TIOCM_CAR : 0)
+		| (ctrl_dl->RI  ? TIOCM_RNG : 0)
+		| (ctrl_dl->DSR ? TIOCM_DSR : 0)
+		| (ctrl_dl->CTS ? TIOCM_CTS : 0);
 }
 
 /* Sets io controls parameters */
@@ -1722,10 +1722,10 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
 	const struct async_icount cnow = port->tty_icount;
 	int ret;
 
-	ret =	((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
-		((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
-		((flags & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
-		((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
+	ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng))
+		|| ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr))
+		|| ((flags & TIOCM_CD)  && (cnow.dcd != cprev->dcd))
+		|| ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
 
 	*cprev = cnow;
 
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 6c7151edd715..b0e2c4847a5d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -110,16 +110,19 @@ static void pty_unthrottle(struct tty_struct *tty)
 static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 {
 	struct tty_struct *to = tty->link;
+	unsigned long flags;
 
 	if (tty->stopped)
 		return 0;
 
 	if (c > 0) {
+		spin_lock_irqsave(&to->port->lock, flags);
 		/* Stuff the data into the input queue of the other end */
 		c = tty_insert_flip_string(to->port, buf, c);
 		/* And shovel */
 		if (c)
 			tty_flip_buffer_push(to->port);
+		spin_unlock_irqrestore(&to->port->lock, flags);
 	}
 	return c;
 }
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 74a408d9db24..435bec40dee6 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -10,6 +10,8 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 #include <linux/clk.h>
 
 #include "8250.h"
@@ -28,9 +30,18 @@ struct aspeed_vuart {
 	void __iomem		*regs;
 	struct clk		*clk;
 	int			line;
+	struct timer_list	unthrottle_timer;
+	struct uart_8250_port	*port;
 };
 
 /*
+ * If we fill the tty flip buffers, we throttle the data ready interrupt
+ * to prevent dropped characters. This timeout defines how long we wait
+ * to (conditionally, depending on buffer state) unthrottle.
+ */
+static const int unthrottle_timeout = HZ/10;
+
+/*
  * The VUART is basically two UART 'front ends' connected by their FIFO
  * (no actual serial line in between). One is on the BMC side (management
  * controller) and one is on the host CPU side.
@@ -179,6 +190,114 @@ static void aspeed_vuart_shutdown(struct uart_port *uart_port)
 	serial8250_do_shutdown(uart_port);
 }
 
+static void __aspeed_vuart_set_throttle(struct uart_8250_port *up,
+		bool throttle)
+{
+	unsigned char irqs = UART_IER_RLSI | UART_IER_RDI;
+
+	up->ier &= ~irqs;
+	if (!throttle)
+		up->ier |= irqs;
+	serial_out(up, UART_IER, up->ier);
+}
+static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__aspeed_vuart_set_throttle(up, throttle);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void aspeed_vuart_throttle(struct uart_port *port)
+{
+	aspeed_vuart_set_throttle(port, true);
+}
+
+static void aspeed_vuart_unthrottle(struct uart_port *port)
+{
+	aspeed_vuart_set_throttle(port, false);
+}
+
+static void aspeed_vuart_unthrottle_exp(struct timer_list *timer)
+{
+	struct aspeed_vuart *vuart = from_timer(vuart, timer, unthrottle_timer);
+	struct uart_8250_port *up = vuart->port;
+
+	if (!tty_buffer_space_avail(&up->port.state->port)) {
+		mod_timer(&vuart->unthrottle_timer,
+			  jiffies + unthrottle_timeout);
+		return;
+	}
+
+	aspeed_vuart_unthrottle(&up->port);
+}
+
+/*
+ * Custom interrupt handler to manage finer-grained flow control. Although we
+ * have throttle/unthrottle callbacks, we've seen that the VUART device can
+ * deliver characters faster than the ldisc has a chance to check buffer space
+ * against the throttle threshold. This results in dropped characters before
+ * the throttle.
+ *
+ * We do this by checking for flip buffer space before RX. If we have no space,
+ * throttle now and schedule an unthrottle for later, once the ldisc has had
+ * a chance to drain the buffers.
+ */
+static int aspeed_vuart_handle_irq(struct uart_port *port)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned int iir, lsr;
+	unsigned long flags;
+	int space, count;
+
+	iir = serial_port_in(port, UART_IIR);
+
+	if (iir & UART_IIR_NO_INT)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	lsr = serial_port_in(port, UART_LSR);
+
+	if (lsr & (UART_LSR_DR | UART_LSR_BI)) {
+		space = tty_buffer_space_avail(&port->state->port);
+
+		if (!space) {
+			/* throttle and schedule an unthrottle later */
+			struct aspeed_vuart *vuart = port->private_data;
+			__aspeed_vuart_set_throttle(up, true);
+
+			if (!timer_pending(&vuart->unthrottle_timer)) {
+				vuart->port = up;
+				mod_timer(&vuart->unthrottle_timer,
+					  jiffies + unthrottle_timeout);
+			}
+
+		} else {
+			count = min(space, 256);
+
+			do {
+				serial8250_read_char(up, lsr);
+				lsr = serial_in(up, UART_LSR);
+				if (--count == 0)
+					break;
+			} while (lsr & (UART_LSR_DR | UART_LSR_BI));
+
+			tty_flip_buffer_push(&port->state->port);
+		}
+	}
+
+	serial8250_modem_status(up);
+	if (lsr & UART_LSR_THRE)
+		serial8250_tx_chars(up);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 1;
+}
+
 static int aspeed_vuart_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port port;
@@ -195,6 +314,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	vuart->dev = &pdev->dev;
+	timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	vuart->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -208,6 +328,9 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	port.port.mapsize = resource_size(res);
 	port.port.startup = aspeed_vuart_startup;
 	port.port.shutdown = aspeed_vuart_shutdown;
+	port.port.throttle = aspeed_vuart_throttle;
+	port.port.unthrottle = aspeed_vuart_unthrottle;
+	port.port.status = UPSTAT_SYNC_FIFO;
 	port.port.dev = &pdev->dev;
 
 	rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
@@ -253,6 +376,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 
 	port.port.irq = irq_of_parse_and_map(np, 0);
 	port.port.irqflags = IRQF_SHARED;
+	port.port.handle_irq = aspeed_vuart_handle_irq;
 	port.port.iotype = UPIO_MEM;
 	port.port.type = PORT_16550A;
 	port.port.uartclk = clk;
@@ -292,6 +416,7 @@ static int aspeed_vuart_remove(struct platform_device *pdev)
 {
 	struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
 
+	del_timer_sync(&vuart->unthrottle_timer);
 	aspeed_vuart_set_enabled(vuart, false);
 	serial8250_unregister_port(vuart->line);
 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 6fcdb90f616a..aff04f1de3a5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -121,25 +121,44 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
 }
 
 /* Returns once the transmitter is empty or we run out of retries */
-static void dw8250_tx_wait_empty(struct uart_port *p, int tries)
+static void dw8250_tx_wait_empty(struct uart_port *p)
 {
+	unsigned int tries = 20000;
+	unsigned int delay_threshold = tries - 1000;
 	unsigned int lsr;
 
 	while (tries--) {
 		lsr = readb (p->membase + (UART_LSR << p->regshift));
 		if (lsr & UART_LSR_TEMT)
 			break;
-		udelay (10);
+
+		/* The device is first given a chance to empty without delay,
+		 * to avoid slowdowns at high bitrates. If after 1000 tries
+		 * the buffer has still not emptied, allow more time for low-
+		 * speed links. */
+		if (tries < delay_threshold)
+			udelay (1);
 	}
 }
 
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
 
 	/* Allow the TX to drain before we reconfigure */
 	if (offset == UART_LCR)
-		dw8250_tx_wait_empty(p, 1000);
+		dw8250_tx_wait_empty(p);
+
+	writeb(value, p->membase + (offset << p->regshift));
+
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
+}
+
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+	struct dw8250_data *d = p->private_data;
 
 	writeb(value, p->membase + (offset << p->regshift));
 
@@ -357,6 +376,9 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			p->serial_in = dw8250_serial_in32be;
 			p->serial_out = dw8250_serial_out32be;
 		}
+		if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
+			p->serial_out = dw8250_serial_out38x;
+
 	} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
@@ -554,6 +576,10 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (!data->skip_autocfg)
 		dw8250_setup_port(p);
 
+#ifdef CONFIG_PM
+	uart.capabilities |= UART_CAP_RPM;
+#endif
+
 	/* If we have a valid fifosize, try hooking up DMA */
 	if (p->fifosize) {
 		data->dma.rxconf.src_maxburst = p->fifosize / 4;
@@ -666,6 +692,7 @@ static const struct dev_pm_ops dw8250_pm_ops = {
 static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ .compatible = "cavium,octeon-3860-uart" },
+	{ .compatible = "marvell,armada-38x-uart" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index ae6a256524d8..5cd8c36c8fcc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -122,7 +122,7 @@ static void __init init_port(struct earlycon_device *device)
 	serial8250_early_out(port, UART_FCR, 0);	/* no fifo */
 	serial8250_early_out(port, UART_MCR, 0x3);	/* DTR + RTS */
 
-	if (port->uartclk && device->baud) {
+	if (port->uartclk) {
 		divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
 		c = serial8250_early_in(port, UART_LCR);
 		serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 9835b1c1cbe1..bfb37f0be22f 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -92,13 +92,43 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		goto err_unprepare;
 	}
 
+	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
+				  UPF_FIXED_TYPE;
 	spin_lock_init(&port->lock);
-	port->mapbase = resource.start;
-	port->mapsize = resource_size(&resource);
 
-	/* Check for shifted address mapping */
-	if (of_property_read_u32(np, "reg-offset", &prop) == 0)
-		port->mapbase += prop;
+	if (resource_type(&resource) == IORESOURCE_IO) {
+		port->iotype = UPIO_PORT;
+		port->iobase = resource.start;
+	} else {
+		port->mapbase = resource.start;
+		port->mapsize = resource_size(&resource);
+
+		/* Check for shifted address mapping */
+		if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+			port->mapbase += prop;
+
+		port->iotype = UPIO_MEM;
+		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+			switch (prop) {
+			case 1:
+				port->iotype = UPIO_MEM;
+				break;
+			case 2:
+				port->iotype = UPIO_MEM16;
+				break;
+			case 4:
+				port->iotype = of_device_is_big_endian(np) ?
+					       UPIO_MEM32BE : UPIO_MEM32;
+				break;
+			default:
+				dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+					 prop);
+				ret = -EINVAL;
+				goto err_dispose;
+			}
+		}
+		port->flags |= UPF_IOREMAP;
+	}
 
 	/* Check for registers offset within the devices address range */
 	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
@@ -114,26 +144,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		port->line = ret;
 
 	port->irq = irq_of_parse_and_map(np, 0);
-	port->iotype = UPIO_MEM;
-	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
-		switch (prop) {
-		case 1:
-			port->iotype = UPIO_MEM;
-			break;
-		case 2:
-			port->iotype = UPIO_MEM16;
-			break;
-		case 4:
-			port->iotype = of_device_is_big_endian(np) ?
-				       UPIO_MEM32BE : UPIO_MEM32;
-			break;
-		default:
-			dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
-				 prop);
-			ret = -EINVAL;
-			goto err_dispose;
-		}
-	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
 	if (IS_ERR(info->rst)) {
@@ -147,8 +157,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 
 	port->type = type;
 	port->uartclk = clk;
-	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
-		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
+	port->irqflags |= IRQF_SHARED;
 
 	if (of_property_read_bool(np, "no-loopback-test"))
 		port->flags |= UPF_SKIP_TEST;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 624b501fd253..1b337fee07ed 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1110,13 +1110,14 @@ static int omap8250_no_handle_irq(struct uart_port *port)
 	return 0;
 }
 
+static const u8 omap4_habit = UART_ERRATA_CLOCK_DISABLE;
 static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
 static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
 
 static const struct of_device_id omap8250_dt_ids[] = {
 	{ .compatible = "ti,omap2-uart" },
 	{ .compatible = "ti,omap3-uart" },
-	{ .compatible = "ti,omap4-uart" },
+	{ .compatible = "ti,omap4-uart", .data = &omap4_habit, },
 	{ .compatible = "ti,am3352-uart", .data = &am3352_habit, },
 	{ .compatible = "ti,am4372-uart", .data = &am3352_habit, },
 	{ .compatible = "ti,dra742-uart", .data = &dra742_habit, },
@@ -1310,8 +1311,17 @@ static void omap8250_complete(struct device *dev)
 static int omap8250_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(priv->line);
 
 	serial8250_suspend_port(priv->line);
+
+	pm_runtime_get_sync(dev);
+	if (!device_may_wakeup(dev))
+		priv->wer = 0;
+	serial_out(up, UART_OMAP_WER, priv->wer);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	flush_work(&priv->qos_work);
 	return 0;
 }
@@ -1353,6 +1363,19 @@ static int omap8250_soft_reset(struct device *dev)
 	int sysc;
 	int syss;
 
+	/*
+	 * At least on omap4, unused uarts may not idle after reset without
+	 * a basic scr dma configuration even with no dma in use. The
+	 * module clkctrl status bits will be 1 instead of 3 blocking idle
+	 * for the whole clockdomain. The softreset below will clear scr,
+	 * and we restore it on resume so this is safe to do on all SoCs
+	 * needing omap8250_soft_reset() quirk. Do it in two writes as
+	 * recommended in the comment for omap8250_update_scr().
+	 */
+	serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1);
+	serial_out(up, UART_OMAP_SCR,
+		   OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL);
+
 	sysc = serial_in(up, UART_OMAP_SYSC);
 
 	/* softreset the UART */
@@ -1403,6 +1426,8 @@ static int omap8250_runtime_suspend(struct device *dev)
 
 		/* Restore to UART mode after reset (for wakeup) */
 		omap8250_update_mdr1(up, priv);
+		/* Restore wakeup enable register */
+		serial_out(up, UART_OMAP_WER, priv->wer);
 	}
 
 	if (up->dma && up->dma->rxchan)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 95833cbc4338..cf541aab2bd0 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -243,6 +243,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 32,
 		.tx_loadsz	= 32,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 8, 16, 30},
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
 	[PORT_ALTR_16550_F64] = {
@@ -250,6 +251,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 64,
 		.tx_loadsz	= 64,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 16, 32, 62},
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
 	[PORT_ALTR_16550_F128] = {
@@ -257,6 +259,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 32, 64, 126},
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
 	/*
@@ -1680,7 +1683,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 	serial8250_rpm_put(up);
 }
 
-static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
 {
 	struct uart_port *port = &up->port;
 	unsigned char ch;
@@ -1740,6 +1743,7 @@ static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
 
 	uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
 }
+EXPORT_SYMBOL_GPL(serial8250_read_char);
 
 /*
  * serial8250_rx_chars: processes according to the passed in LSR
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0f058df0b070..df8bd0c7b97d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -115,7 +115,6 @@ config SERIAL_SB1250_DUART_CONSOLE
 
 config SERIAL_ATMEL
 	bool "AT91 on-chip serial port support"
-	depends on HAS_DMA
 	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -500,7 +499,6 @@ config SERIAL_SA1100_CONSOLE
 
 config SERIAL_IMX
 	tristate "IMX serial port support"
-	depends on HAS_DMA
 	depends on ARCH_MXC || COMPILE_TEST
 	select SERIAL_CORE
 	select RATIONAL
@@ -676,6 +674,8 @@ config SERIAL_SH_SCI
 
 config SERIAL_SH_SCI_NR_UARTS
 	int "Maximum number of SCI(F) serial ports" if EXPERT
+	range 1 64 if 64BIT
+	range 1 32 if !64BIT
 	depends on SERIAL_SH_SCI
 	default "3" if H8300
 	default "10" if SUPERH
@@ -1262,7 +1262,6 @@ config SERIAL_PCH_UART_CONSOLE
 
 config SERIAL_MXS_AUART
 	tristate "MXS AUART support"
-	depends on HAS_DMA
 	depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -1295,7 +1294,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
 
 config SERIAL_AR933X
 	tristate "AR933X serial port support"
-	depends on HAVE_CLK && SOC_AR933X
+	depends on HAVE_CLK && ATH79
 	select SERIAL_CORE
 	help
 	  If you have an Atheros AR933X SOC based board and want to use the
@@ -1473,7 +1472,6 @@ config SERIAL_SPRD_CONSOLE
 config SERIAL_STM32
 	tristate "STMicroelectronics STM32 serial port support"
 	select SERIAL_CORE
-	depends on HAS_DMA
 	depends on ARCH_STM32 || COMPILE_TEST
 	help
 	  This driver is for the on-chip Serial Controller on
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b40a5b449ee..ebd33c0232e6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1727,10 +1727,26 @@ static int pl011_allocate_irq(struct uart_amba_port *uap)
  */
 static void pl011_enable_interrupts(struct uart_amba_port *uap)
 {
+	unsigned int i;
+
 	spin_lock_irq(&uap->port.lock);
 
 	/* Clear out any spuriously appearing RX interrupts */
 	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
+
+	/*
+	 * RXIS is asserted only when the RX FIFO transitions from below
+	 * to above the trigger threshold.  If the RX FIFO is already
+	 * full to the threshold this can't happen and RXIS will now be
+	 * stuck off.  Drain the RX FIFO explicitly to fix this:
+	 */
+	for (i = 0; i < uap->fifosize * 2; ++i) {
+		if (pl011_read(uap, REG_FR) & UART01x_FR_RXFE)
+			break;
+
+		pl011_read(uap, REG_DR);
+	}
+
 	uap->im = UART011_RTIM;
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index e287fe8f10fc..55b3eff148b1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1757,7 +1757,6 @@ static int atmel_startup(struct uart_port *port)
 {
 	struct platform_device *pdev = to_platform_device(port->dev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->state->port.tty;
 	int retval;
 
 	/*
@@ -1772,8 +1771,8 @@ static int atmel_startup(struct uart_port *port)
 	 * Allocate the IRQ
 	 */
 	retval = request_irq(port->irq, atmel_interrupt,
-			IRQF_SHARED | IRQF_COND_SUSPEND,
-			tty ? tty->name : "atmel_serial", port);
+			     IRQF_SHARED | IRQF_COND_SUSPEND,
+			     dev_name(&pdev->dev), port);
 	if (retval) {
 		dev_err(port->dev, "atmel_startup - Can't get irq\n");
 		return retval;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 22683393a0f2..c14873b67803 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -246,7 +246,6 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 		return -ENXIO;
 	}
 	port->mapbase = addr;
-	port->uartclk = BASE_BAUD * 16;
 
 	val = of_get_flat_dt_prop(node, "reg-offset", NULL);
 	if (val)
@@ -281,6 +280,10 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 	if (val)
 		early_console_dev.baud = be32_to_cpu(*val);
 
+	val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
+	if (val)
+		port->uartclk = be32_to_cpu(*val);
+
 	if (options) {
 		early_console_dev.baud = simple_strtoul(options, NULL, 0);
 		strlcpy(early_console_dev.options, options,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c2fc6bef7a6f..4e853570ea80 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1291,18 +1291,13 @@ static void imx_uart_enable_dma(struct imx_port *sport)
 
 static void imx_uart_disable_dma(struct imx_port *sport)
 {
-	u32 ucr1, ucr2;
+	u32 ucr1;
 
 	/* clear UCR1 */
 	ucr1 = imx_uart_readl(sport, UCR1);
 	ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN);
 	imx_uart_writel(sport, ucr1, UCR1);
 
-	/* clear UCR2 */
-	ucr2 = imx_uart_readl(sport, UCR2);
-	ucr2 &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
-	imx_uart_writel(sport, ucr2, UCR2);
-
 	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
 
 	sport->dma_is_enabled = 0;
@@ -1427,13 +1422,21 @@ static void imx_uart_shutdown(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long flags;
-	u32 ucr1, ucr2;
+	u32 ucr1, ucr2, ucr4;
 
 	if (sport->dma_is_enabled) {
-		sport->dma_is_rxing = 0;
-		sport->dma_is_txing = 0;
 		dmaengine_terminate_sync(sport->dma_chan_tx);
+		if (sport->dma_is_txing) {
+			dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
+				     sport->dma_tx_nents, DMA_TO_DEVICE);
+			sport->dma_is_txing = 0;
+		}
 		dmaengine_terminate_sync(sport->dma_chan_rx);
+		if (sport->dma_is_rxing) {
+			dma_unmap_sg(sport->port.dev, &sport->rx_sgl,
+				     1, DMA_FROM_DEVICE);
+			sport->dma_is_rxing = 0;
+		}
 
 		spin_lock_irqsave(&sport->port.lock, flags);
 		imx_uart_stop_tx(port);
@@ -1449,6 +1452,10 @@ static void imx_uart_shutdown(struct uart_port *port)
 	ucr2 = imx_uart_readl(sport, UCR2);
 	ucr2 &= ~(UCR2_TXEN | UCR2_ATEN);
 	imx_uart_writel(sport, ucr2, UCR2);
+
+	ucr4 = imx_uart_readl(sport, UCR4);
+	ucr4 &= ~UCR4_OREN;
+	imx_uart_writel(sport, ucr4, UCR4);
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	/*
@@ -2425,8 +2432,7 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
 
 static int imx_uart_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	imx_uart_save_context(sport);
 
@@ -2437,8 +2443,7 @@ static int imx_uart_suspend_noirq(struct device *dev)
 
 static int imx_uart_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 	int ret;
 
 	ret = clk_enable(sport->clk_ipg);
@@ -2452,8 +2457,7 @@ static int imx_uart_resume_noirq(struct device *dev)
 
 static int imx_uart_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 	int ret;
 
 	uart_suspend_port(&imx_uart_uart_driver, &sport->port);
@@ -2471,8 +2475,7 @@ static int imx_uart_suspend(struct device *dev)
 
 static int imx_uart_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	/* disable wakeup from i.MX UART */
 	imx_uart_enable_wakeup(sport, false);
@@ -2487,8 +2490,7 @@ static int imx_uart_resume(struct device *dev)
 
 static int imx_uart_freeze(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	uart_suspend_port(&imx_uart_uart_driver, &sport->port);
 
@@ -2497,8 +2499,7 @@ static int imx_uart_freeze(struct device *dev)
 
 static int imx_uart_thaw(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct imx_port *sport = platform_get_drvdata(pdev);
+	struct imx_port *sport = dev_get_drvdata(dev);
 
 	uart_resume_port(&imx_uart_uart_driver, &sport->port);
 
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index ee96cf0d0057..736b74fd6623 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1812,11 +1812,34 @@ static const struct of_device_id msm_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, msm_match_table);
 
+static int __maybe_unused msm_serial_suspend(struct device *dev)
+{
+	struct msm_port *port = dev_get_drvdata(dev);
+
+	uart_suspend_port(&msm_uart_driver, &port->uart);
+
+	return 0;
+}
+
+static int __maybe_unused msm_serial_resume(struct device *dev)
+{
+	struct msm_port *port = dev_get_drvdata(dev);
+
+	uart_resume_port(&msm_uart_driver, &port->uart);
+
+	return 0;
+}
+
+static const struct dev_pm_ops msm_serial_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
+};
+
 static struct platform_driver msm_platform_driver = {
 	.remove = msm_serial_remove,
 	.probe = msm_serial_probe,
 	.driver = {
 		.name = "msm_serial",
+		.pm = &msm_serial_dev_pm_ops,
 		.of_match_table = msm_match_table,
 	},
 };
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index f503fab1e268..d04b5eeea3c6 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -71,6 +71,8 @@
 #define UART_BRDV		0x10
 #define  BRDV_BAUD_MASK         0x3FF
 
+#define UART_OSAMP		0x14
+
 #define MVEBU_NR_UARTS		2
 
 #define MVEBU_UART_TYPE		"mvebu-uart"
@@ -108,6 +110,17 @@ struct mvebu_uart_driver_data {
 	struct uart_flags flags;
 };
 
+/* Saved registers during suspend */
+struct mvebu_uart_pm_regs {
+	unsigned int rbr;
+	unsigned int tsh;
+	unsigned int ctrl;
+	unsigned int intr;
+	unsigned int stat;
+	unsigned int brdv;
+	unsigned int osamp;
+};
+
 /* MVEBU UART driver structure */
 struct mvebu_uart {
 	struct uart_port *port;
@@ -115,6 +128,9 @@ struct mvebu_uart {
 	int irq[UART_IRQ_COUNT];
 	unsigned char __iomem *nb;
 	struct mvebu_uart_driver_data *data;
+#if defined(CONFIG_PM)
+	struct mvebu_uart_pm_regs pm_regs;
+#endif /* CONFIG_PM */
 };
 
 static struct mvebu_uart *to_mvuart(struct uart_port *port)
@@ -718,6 +734,51 @@ static struct uart_driver mvebu_uart_driver = {
 #endif
 };
 
+#if defined(CONFIG_PM)
+static int mvebu_uart_suspend(struct device *dev)
+{
+	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+	struct uart_port *port = mvuart->port;
+
+	uart_suspend_port(&mvebu_uart_driver, port);
+
+	mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port));
+	mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port));
+	mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port));
+	mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port));
+	mvuart->pm_regs.stat = readl(port->membase + UART_STAT);
+	mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV);
+	mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP);
+
+	device_set_wakeup_enable(dev, true);
+
+	return 0;
+}
+
+static int mvebu_uart_resume(struct device *dev)
+{
+	struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+	struct uart_port *port = mvuart->port;
+
+	writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port));
+	writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port));
+	writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port));
+	writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port));
+	writel(mvuart->pm_regs.stat, port->membase + UART_STAT);
+	writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV);
+	writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP);
+
+	uart_resume_port(&mvebu_uart_driver, port);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mvebu_uart_pm_ops = {
+	.suspend        = mvebu_uart_suspend,
+	.resume         = mvebu_uart_resume,
+};
+#endif /* CONFIG_PM */
+
 static const struct of_device_id mvebu_uart_of_match[];
 
 /* Counter to keep track of each UART port id when not using CONFIG_OF */
@@ -891,6 +952,9 @@ static struct platform_driver mvebu_uart_platform_driver = {
 		.name  = "mvebu-uart",
 		.of_match_table = of_match_ptr(mvebu_uart_of_match),
 		.suppress_bind_attrs = true,
+#if defined(CONFIG_PM)
+		.pm	= &mvebu_uart_pm_ops,
+#endif /* CONFIG_PM */
 	},
 };
 
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a1b3eb04cb32..c62e17c85f57 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -98,14 +98,13 @@ struct qcom_geni_serial_port {
 	enum geni_se_xfer_mode xfer_mode;
 	bool setup;
 	int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
-	unsigned int xmit_size;
 	unsigned int baud;
 	unsigned int tx_bytes_pw;
 	unsigned int rx_bytes_pw;
 	bool brk;
 };
 
-static const struct uart_ops qcom_geni_serial_pops;
+static const struct uart_ops qcom_geni_console_pops;
 static struct uart_driver qcom_geni_console_driver;
 static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
 static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
@@ -118,7 +117,14 @@ static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
 #define to_dev_port(ptr, member) \
 		container_of(ptr, struct qcom_geni_serial_port, member)
 
-static struct qcom_geni_serial_port qcom_geni_console_port;
+static struct qcom_geni_serial_port qcom_geni_console_port = {
+	.uport = {
+		.iotype = UPIO_MEM,
+		.ops = &qcom_geni_console_pops,
+		.flags = UPF_BOOT_AUTOCONF,
+		.line = 0,
+	},
+};
 
 static int qcom_geni_serial_request_port(struct uart_port *uport)
 {
@@ -189,8 +195,19 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
 		timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500;
 	}
 
-	return !readl_poll_timeout_atomic(uport->membase + offset, reg,
-			 (bool)(reg & field) == set, 10, timeout_us);
+	/*
+	 * Use custom implementation instead of readl_poll_atomic since ktimer
+	 * is not ready at the time of early console.
+	 */
+	timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
+	while (timeout_us) {
+		reg = readl_relaxed(uport->membase + offset);
+		if ((bool)(reg & field) == set)
+			return true;
+		udelay(10);
+		timeout_us -= 10;
+	}
+	return false;
 }
 
 static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
@@ -286,6 +303,10 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
 	u32 bytes_to_send = count;
 
 	for (i = 0; i < count; i++) {
+		/*
+		 * uart_console_write() adds a carriage return for each newline.
+		 * Account for additional bytes to be written.
+		 */
 		if (s[i] == '\n')
 			bytes_to_send++;
 	}
@@ -305,7 +326,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
 		if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
 						M_TX_FIFO_WATERMARK_EN, true))
 			break;
-		chars_to_write = min_t(size_t, (size_t)(count - i), avail / 2);
+		chars_to_write = min_t(size_t, count - i, avail / 2);
 		uart_console_write(uport, s + i, chars_to_write,
 						qcom_geni_serial_wr_char);
 		writel_relaxed(M_TX_FIFO_WATERMARK_EN, uport->membase +
@@ -406,20 +427,18 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport)
 	u32 status;
 
 	if (port->xfer_mode == GENI_SE_FIFO) {
-		status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+		/*
+		 * readl ensures reading & writing of IRQ_EN register
+		 * is not re-ordered before checking the status of the
+		 * Serial Engine.
+		 */
+		status = readl(uport->membase + SE_GENI_STATUS);
 		if (status & M_GENI_CMD_ACTIVE)
 			return;
 
 		if (!qcom_geni_serial_tx_empty(uport))
 			return;
 
-		/*
-		 * Ensure writing to IRQ_EN & watermark registers are not
-		 * re-ordered before checking the status of the Serial
-		 * Engine and TX FIFO
-		 */
-		mb();
-
 		irq_en = readl_relaxed(uport->membase +	SE_GENI_M_IRQ_EN);
 		irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
 
@@ -442,7 +461,6 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
 		writel_relaxed(0, uport->membase +
 				     SE_GENI_TX_WATERMARK_REG);
 	}
-	port->xmit_size = 0;
 	writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
 	status = readl_relaxed(uport->membase + SE_GENI_STATUS);
 	/* Possible stop tx is called multiple times. */
@@ -572,21 +590,14 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
 	chunk = uart_circ_chars_pending(xmit);
 	status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
 	/* Both FIFO and framework buffer are drained */
-	if (chunk == port->xmit_size && !status) {
-		port->xmit_size = 0;
-		uart_circ_clear(xmit);
+	if (!chunk && !status) {
 		qcom_geni_serial_stop_tx(uport);
 		goto out_write_wakeup;
 	}
-	chunk -= port->xmit_size;
 
 	avail = (port->tx_fifo_depth - port->tx_wm) * port->tx_bytes_pw;
-	tail = (xmit->tail + port->xmit_size) & (UART_XMIT_SIZE - 1);
-	if (chunk > (UART_XMIT_SIZE - tail))
-		chunk = UART_XMIT_SIZE - tail;
-	if (chunk > avail)
-		chunk = avail;
-
+	tail = xmit->tail;
+	chunk = min3((size_t)chunk, (size_t)(UART_XMIT_SIZE - tail), avail);
 	if (!chunk)
 		goto out_write_wakeup;
 
@@ -595,24 +606,27 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
 	remaining = chunk;
 	for (i = 0; i < chunk; ) {
 		unsigned int tx_bytes;
-		unsigned int buf = 0;
+		u8 buf[sizeof(u32)];
 		int c;
 
-		tx_bytes = min_t(size_t, remaining, (size_t)port->tx_bytes_pw);
+		memset(buf, 0, ARRAY_SIZE(buf));
+		tx_bytes = min_t(size_t, remaining, port->tx_bytes_pw);
 		for (c = 0; c < tx_bytes ; c++)
-			buf |= (xmit->buf[tail + c] << (c * BITS_PER_BYTE));
+			buf[c] = xmit->buf[tail + c];
 
-		writel_relaxed(buf, uport->membase + SE_GENI_TX_FIFOn);
+		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
 
 		i += tx_bytes;
-		tail = (tail + tx_bytes) & (UART_XMIT_SIZE - 1);
+		tail += tx_bytes;
 		uport->icount.tx += tx_bytes;
 		remaining -= tx_bytes;
 	}
+
+	xmit->tail = tail & (UART_XMIT_SIZE - 1);
 	qcom_geni_serial_poll_tx_done(uport);
-	port->xmit_size += chunk;
 out_write_wakeup:
-	uart_write_wakeup(uport);
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(uport);
 }
 
 static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
@@ -627,7 +641,7 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
 	if (uport->suspended)
-		return IRQ_HANDLED;
+		return IRQ_NONE;
 
 	spin_lock_irqsave(&uport->lock, flags);
 	m_irq_status = readl_relaxed(uport->membase + SE_GENI_M_IRQ_STATUS);
@@ -667,20 +681,16 @@ out_unlock:
 	return IRQ_HANDLED;
 }
 
-static int get_tx_fifo_size(struct qcom_geni_serial_port *port)
+static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
 {
 	struct uart_port *uport;
 
-	if (!port)
-		return -ENODEV;
-
 	uport = &port->uport;
 	port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
 	port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se);
 	port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
 	uport->fifosize =
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
-	return 0;
 }
 
 static void set_rfr_wm(struct qcom_geni_serial_port *port)
@@ -702,7 +712,6 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	/* Stop the console before stopping the current tx */
 	console_stop(uport->cons);
 
-	disable_irq(uport->irq);
 	free_irq(uport->irq, uport);
 	spin_lock_irqsave(&uport->lock, flags);
 	qcom_geni_serial_stop_tx(uport);
@@ -892,7 +901,7 @@ out_restart_rx:
 
 static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
 {
-	return !readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
+	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
 }
 
 #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
@@ -910,7 +919,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
 
 	port = get_port_from_line(co->index);
 	if (IS_ERR(port)) {
-		pr_err("Invalid line %d(%d)\n", co->index, (int)PTR_ERR(port));
+		pr_err("Invalid line %d\n", co->index);
 		return PTR_ERR(port);
 	}
 
@@ -942,6 +951,65 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
 	return uart_set_options(uport, co, baud, parity, bits, flow);
 }
 
+static void qcom_geni_serial_earlycon_write(struct console *con,
+					const char *s, unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+
+	__qcom_geni_serial_console_write(&dev->port, s, n);
+}
+
+static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
+								const char *opt)
+{
+	struct uart_port *uport = &dev->port;
+	u32 tx_trans_cfg;
+	u32 tx_parity_cfg = 0;	/* Disable Tx Parity */
+	u32 rx_trans_cfg = 0;
+	u32 rx_parity_cfg = 0;	/* Disable Rx Parity */
+	u32 stop_bit_len = 0;	/* Default stop bit length - 1 bit */
+	u32 bits_per_char;
+	struct geni_se se;
+
+	if (!uport->membase)
+		return -EINVAL;
+
+	memset(&se, 0, sizeof(se));
+	se.base = uport->membase;
+	if (geni_se_read_proto(&se) != GENI_SE_UART)
+		return -ENXIO;
+	/*
+	 * Ignore Flow control.
+	 * n = 8.
+	 */
+	tx_trans_cfg = UART_CTS_MASK;
+	bits_per_char = BITS_PER_BYTE;
+
+	/*
+	 * Make an unconditional cancel on the main sequencer to reset
+	 * it else we could end up in data loss scenarios.
+	 */
+	qcom_geni_serial_poll_tx_done(uport);
+	qcom_geni_serial_abort_rx(uport);
+	geni_se_config_packing(&se, BITS_PER_BYTE, 1, false, true, false);
+	geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2);
+	geni_se_select_mode(&se, GENI_SE_FIFO);
+
+	writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
+	writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
+	writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
+	writel_relaxed(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
+	writel_relaxed(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
+	writel_relaxed(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
+	writel_relaxed(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
+
+	dev->con->write = qcom_geni_serial_earlycon_write;
+	dev->con->setup = NULL;
+	return 0;
+}
+OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart",
+				qcom_geni_serial_earlycon_setup);
+
 static int __init console_register(struct uart_driver *drv)
 {
 	return uart_register_driver(drv);
@@ -1026,16 +1094,13 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 
 	if (pdev->dev.of_node)
 		line = of_alias_get_id(pdev->dev.of_node, "serial");
-	else
-		line = pdev->id;
 
 	if (line < 0 || line >= GENI_UART_CONS_PORTS)
 		return -ENXIO;
 	port = get_port_from_line(line);
 	if (IS_ERR(port)) {
-		ret = PTR_ERR(port);
-		dev_err(&pdev->dev, "Invalid line %d(%d)\n", line, ret);
-		return ret;
+		dev_err(&pdev->dev, "Invalid line %d\n", line);
+		return PTR_ERR(port);
 	}
 
 	uport = &port->uport;
@@ -1072,7 +1137,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	uport->private_data = &qcom_geni_console_driver;
 	platform_set_drvdata(pdev, port);
 	port->handle_rx = handle_rx_console;
-	port->setup = false;
 	return uart_add_one_port(&qcom_geni_console_driver, uport);
 }
 
@@ -1087,8 +1151,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 
 static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
 	uart_suspend_port(uport->private_data, uport);
@@ -1097,12 +1160,19 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
 
 static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
 	if (console_suspend_enabled && uport->suspended) {
 		uart_resume_port(uport->private_data, uport);
+		/*
+		 * uart_suspend_port() invokes port shutdown which in turn
+		 * frees the irq. uart_resume_port invokes port startup which
+		 * performs request_irq. The request_irq auto-enables the IRQ.
+		 * In addition, resume_noirq implicitly enables the IRQ and
+		 * leads to an unbalanced IRQ enable warning. Disable the IRQ
+		 * before returning so that the warning is suppressed.
+		 */
 		disable_irq(uport->irq);
 	}
 	return 0;
@@ -1133,11 +1203,6 @@ static int __init qcom_geni_serial_init(void)
 {
 	int ret;
 
-	qcom_geni_console_port.uport.iotype = UPIO_MEM;
-	qcom_geni_console_port.uport.ops = &qcom_geni_console_pops;
-	qcom_geni_console_port.uport.flags = UPF_BOOT_AUTOCONF;
-	qcom_geni_console_port.uport.line = 0;
-
 	ret = console_register(&qcom_geni_console_driver);
 	if (ret)
 		return ret;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 3f2f8c118ce0..2f8fa184aafa 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -856,35 +856,54 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 {
 	struct s3c24xx_uart_dma	*dma = p->dma;
+	struct dma_slave_caps dma_caps;
+	const char *reason = NULL;
 	int ret;
 
 	/* Default slave configuration parameters */
 	dma->rx_conf.direction		= DMA_DEV_TO_MEM;
 	dma->rx_conf.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
 	dma->rx_conf.src_addr		= p->port.mapbase + S3C2410_URXH;
-	dma->rx_conf.src_maxburst	= 16;
+	dma->rx_conf.src_maxburst	= 1;
 
 	dma->tx_conf.direction		= DMA_MEM_TO_DEV;
 	dma->tx_conf.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
 	dma->tx_conf.dst_addr		= p->port.mapbase + S3C2410_UTXH;
-	if (dma_get_cache_alignment() >= 16)
-		dma->tx_conf.dst_maxburst = 16;
-	else
-		dma->tx_conf.dst_maxburst = 1;
+	dma->tx_conf.dst_maxburst	= 1;
 
 	dma->rx_chan = dma_request_chan(p->port.dev, "rx");
 
-	if (IS_ERR(dma->rx_chan))
-		return PTR_ERR(dma->rx_chan);
+	if (IS_ERR(dma->rx_chan)) {
+		reason = "DMA RX channel request failed";
+		ret = PTR_ERR(dma->rx_chan);
+		goto err_warn;
+	}
+
+	ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA RX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_rx;
+	}
 
 	dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
 
 	dma->tx_chan = dma_request_chan(p->port.dev, "tx");
 	if (IS_ERR(dma->tx_chan)) {
+		reason = "DMA TX channel request failed";
 		ret = PTR_ERR(dma->tx_chan);
 		goto err_release_rx;
 	}
 
+	ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA TX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_tx;
+	}
+
 	dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
 
 	/* RX buffer */
@@ -899,6 +918,7 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
 				dma->rx_size, DMA_FROM_DEVICE);
 	if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+		reason = "DMA mapping error for RX buffer";
 		ret = -EIO;
 		goto err_free_rx;
 	}
@@ -907,6 +927,7 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 	dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
 				UART_XMIT_SIZE, DMA_TO_DEVICE);
 	if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+		reason = "DMA mapping error for TX buffer";
 		ret = -EIO;
 		goto err_unmap_rx;
 	}
@@ -922,6 +943,9 @@ err_release_tx:
 	dma_release_channel(dma->tx_chan);
 err_release_rx:
 	dma_release_channel(dma->rx_chan);
+err_warn:
+	if (reason)
+		dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
 	return ret;
 }
 
@@ -1040,8 +1064,6 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	if (ourport->dma) {
 		ret = s3c24xx_serial_request_dma(ourport);
 		if (ret < 0) {
-			dev_warn(port->dev,
-				 "DMA request failed, DMA will not be used\n");
 			devm_kfree(port->dev, ourport->dma);
 			ourport->dma = NULL;
 		}
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 65792a3539d0..243c96025053 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1168,7 +1168,10 @@ static int sc16is7xx_probe(struct device *dev,
 		else
 			return PTR_ERR(s->clk);
 	} else {
-		clk_prepare_enable(s->clk);
+		ret = clk_prepare_enable(s->clk);
+		if (ret)
+			return ret;
+
 		freq = clk_get_rate(s->clk);
 	}
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 6ff9405954a6..890b8832aff2 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -674,8 +674,8 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
 static void uart_throttle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
 	struct uart_port *port;
-	upstat_t mask = 0;
 
 	port = uart_port_ref(state);
 	if (!port)
@@ -703,8 +703,8 @@ static void uart_throttle(struct tty_struct *tty)
 static void uart_unthrottle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
 	struct uart_port *port;
-	upstat_t mask = 0;
 
 	port = uart_port_ref(state);
 	if (!port)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index fdbbff547106..b46b146524ce 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -160,6 +160,7 @@ struct sci_port {
 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
 
 static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
 static struct uart_driver sci_uart_driver;
 
 static inline struct sci_port *
@@ -2390,6 +2391,27 @@ done:
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
+	/* byte size and parity */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		bits = 7;
+		break;
+	case CS6:
+		bits = 8;
+		break;
+	case CS7:
+		bits = 9;
+		break;
+	default:
+		bits = 10;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		bits++;
+	if (termios->c_cflag & PARENB)
+		bits++;
+
 	if (best_clk >= 0) {
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 			switch (srr + 1) {
@@ -2406,8 +2428,27 @@ done:
 		serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
 		serial_port_out(port, SCSMR, smr_val);
 		serial_port_out(port, SCBRR, brr);
-		if (sci_getreg(port, HSSRR)->size)
-			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
+		if (sci_getreg(port, HSSRR)->size) {
+			unsigned int hssrr = srr | HSCIF_SRE;
+			/* Calculate deviation from intended rate at the
+			 * center of the last stop bit in sampling clocks.
+			 */
+			int last_stop = bits * 2 - 1;
+			int deviation = min_err * srr * last_stop / 2 / baud;
+
+			if (abs(deviation) >= 2) {
+				/* At least two sampling clocks off at the
+				 * last stop bit; we can increase the error
+				 * margin by shifting the sampling point.
+				 */
+				int shift = min(-8, max(7, deviation / 2));
+
+				hssrr |= (shift << HSCIF_SRHP_SHIFT) &
+					 HSCIF_SRHP_MASK;
+				hssrr |= HSCIF_SRDE;
+			}
+			serial_port_out(port, HSSRR, hssrr);
+		}
 
 		/* Wait one bit interval */
 		udelay((1000000 + (baud - 1)) / baud);
@@ -2474,27 +2515,6 @@ done:
 	 * value obtained by this formula is too small. Therefore, if the value
 	 * is smaller than 20ms, use 20ms as the timeout value for DMA.
 	 */
-	/* byte size and parity */
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		bits = 7;
-		break;
-	case CS6:
-		bits = 8;
-		break;
-	case CS7:
-		bits = 9;
-		break;
-	default:
-		bits = 10;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		bits++;
-	if (termios->c_cflag & PARENB)
-		bits++;
-
 	s->rx_frame = (10000 * bits) / (baud / 100);
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
 	s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame;
@@ -2890,16 +2910,15 @@ static void serial_console_write(struct console *co, const char *s,
 	unsigned long flags;
 	int locked = 1;
 
-	local_irq_save(flags);
 #if defined(SUPPORT_SYSRQ)
 	if (port->sysrq)
 		locked = 0;
 	else
 #endif
 	if (oops_in_progress)
-		locked = spin_trylock(&port->lock);
+		locked = spin_trylock_irqsave(&port->lock, flags);
 	else
-		spin_lock(&port->lock);
+		spin_lock_irqsave(&port->lock, flags);
 
 	/* first save SCSCR then disable interrupts, keep clock source */
 	ctrl = serial_port_in(port, SCSCR);
@@ -2919,8 +2938,7 @@ static void serial_console_write(struct console *co, const char *s,
 	serial_port_out(port, SCSCR, ctrl);
 
 	if (locked)
-		spin_unlock(&port->lock);
-	local_irq_restore(flags);
+		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int serial_console_setup(struct console *co, char *options)
@@ -3026,6 +3044,7 @@ static int sci_remove(struct platform_device *dev)
 {
 	struct sci_port *port = platform_get_drvdata(dev);
 
+	sci_ports_in_use &= ~BIT(port->port.line);
 	uart_remove_one_port(&sci_uart_driver, &port->port);
 
 	sci_cleanup_single(port);
@@ -3107,6 +3126,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 
 	/* Get the line number from the aliases node. */
 	id = of_alias_get_id(np, "serial");
+	if (id < 0 && ~sci_ports_in_use)
+		id = ffz(sci_ports_in_use);
 	if (id < 0) {
 		dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
 		return NULL;
@@ -3141,6 +3162,9 @@ static int sci_probe_single(struct platform_device *dev,
 		dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
 		return -EINVAL;
 	}
+	BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8);
+	if (sci_ports_in_use & BIT(index))
+		return -EBUSY;
 
 	mutex_lock(&sci_uart_registration_lock);
 	if (!sci_uart_driver.state) {
@@ -3239,6 +3263,7 @@ static int sci_probe(struct platform_device *dev)
 	sh_bios_gdb_detach();
 #endif
 
+	sci_ports_in_use |= BIT(dev_id);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index a5f792fd48d9..0b9e804e61a9 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -130,6 +130,10 @@ enum {
 
 /* HSSRR HSCIF */
 #define HSCIF_SRE	BIT(15)	/* Sampling Rate Register Enable */
+#define HSCIF_SRDE	BIT(14) /* Sampling Point Register Enable */
+
+#define HSCIF_SRHP_SHIFT	8
+#define HSCIF_SRHP_MASK		0x0f00
 
 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
 #define SCPCR_RTSC	BIT(4)	/* Serial Port RTS# Pin / Output Pin */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 5f9f01fac6dd..7971997cdead 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -842,16 +842,14 @@ static int asc_serial_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int asc_serial_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 
 	return uart_suspend_port(&asc_uart_driver, port);
 }
 
 static int asc_serial_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 
 	return uart_resume_port(&asc_uart_driver, port);
 }
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index bd72dd843338..8a3e34234e98 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1097,45 +1097,6 @@ static const struct uart_ops cdns_uart_ops = {
 #endif
 };
 
-static struct uart_port cdns_uart_port[CDNS_UART_NR_PORTS];
-
-/**
- * cdns_uart_get_port - Configure the port from platform device resource info
- * @id: Port id
- *
- * Return: a pointer to a uart_port or NULL for failure
- */
-static struct uart_port *cdns_uart_get_port(int id)
-{
-	struct uart_port *port;
-
-	/* Try the given port id if failed use default method */
-	if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
-		/* Find the next unused port */
-		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
-			if (cdns_uart_port[id].mapbase == 0)
-				break;
-	}
-
-	if (id >= CDNS_UART_NR_PORTS)
-		return NULL;
-
-	port = &cdns_uart_port[id];
-
-	/* At this point, we've got an empty uart_port struct, initialize it */
-	spin_lock_init(&port->lock);
-	port->membase	= NULL;
-	port->irq	= 0;
-	port->type	= PORT_UNKNOWN;
-	port->iotype	= UPIO_MEM32;
-	port->flags	= UPF_BOOT_AUTOCONF;
-	port->ops	= &cdns_uart_ops;
-	port->fifosize	= CDNS_UART_FIFO_SIZE;
-	port->line	= id;
-	port->dev	= NULL;
-	return port;
-}
-
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
  * cdns_uart_console_wait_tx - Wait for the TX to be full
@@ -1206,6 +1167,10 @@ OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
 OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
 
+
+/* Static pointer to console port */
+static struct uart_port *console_port;
+
 /**
  * cdns_uart_console_write - perform write operation
  * @co: Console handle
@@ -1215,7 +1180,7 @@ OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
 static void cdns_uart_console_write(struct console *co, const char *s,
 				unsigned int count)
 {
-	struct uart_port *port = &cdns_uart_port[co->index];
+	struct uart_port *port = console_port;
 	unsigned long flags;
 	unsigned int imr, ctrl;
 	int locked = 1;
@@ -1261,15 +1226,13 @@ static void cdns_uart_console_write(struct console *co, const char *s,
  */
 static int __init cdns_uart_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port = &cdns_uart_port[co->index];
+	struct uart_port *port = console_port;
+
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 
-	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
-		return -EINVAL;
-
 	if (!port->membase) {
 		pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
 			 co->index);
@@ -1293,20 +1256,6 @@ static struct console cdns_uart_console = {
 	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
 	.data	= &cdns_uart_uart_driver,
 };
-
-/**
- * cdns_uart_console_init - Initialization call
- *
- * Return: 0 on success, negative errno otherwise
- */
-static int __init cdns_uart_console_init(void)
-{
-	register_console(&cdns_uart_console);
-	return 0;
-}
-
-console_initcall(cdns_uart_console_init);
-
 #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
 
 static struct uart_driver cdns_uart_uart_driver = {
@@ -1430,8 +1379,7 @@ static int cdns_uart_resume(struct device *device)
 #endif /* ! CONFIG_PM_SLEEP */
 static int __maybe_unused cdns_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct cdns_uart *cdns_uart = port->private_data;
 
 	clk_disable(cdns_uart->uartclk);
@@ -1441,8 +1389,7 @@ static int __maybe_unused cdns_runtime_suspend(struct device *dev)
 
 static int __maybe_unused cdns_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct cdns_uart *cdns_uart = port->private_data;
 
 	clk_enable(cdns_uart->pclk);
@@ -1487,6 +1434,9 @@ static int cdns_uart_probe(struct platform_device *pdev)
 			GFP_KERNEL);
 	if (!cdns_uart_data)
 		return -ENOMEM;
+	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
 
 	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
 	if (match && match->data) {
@@ -1552,15 +1502,24 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (id < 0)
 		id = 0;
 
-	/* Initialize the port structure */
-	port = cdns_uart_get_port(id);
-
-	if (!port) {
+	if (id >= CDNS_UART_NR_PORTS) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
 		rc = -ENODEV;
 		goto err_out_notif_unreg;
 	}
 
+	/* At this point, we've got an empty uart_port struct, initialize it */
+	spin_lock_init(&port->lock);
+	port->membase	= NULL;
+	port->irq	= 0;
+	port->type	= PORT_UNKNOWN;
+	port->iotype	= UPIO_MEM32;
+	port->flags	= UPF_BOOT_AUTOCONF;
+	port->ops	= &cdns_uart_ops;
+	port->fifosize	= CDNS_UART_FIFO_SIZE;
+	port->line	= id;
+	port->dev	= NULL;
+
 	/*
 	 * Register the port.
 	 * This function also registers this device with the tty layer
@@ -1579,6 +1538,17 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/*
+	 * If console hasn't been found yet try to assign this port
+	 * because it is required to be assigned for console setup function.
+	 * If register_console() don't assign value, then console_port pointer
+	 * is cleanup.
+	 */
+	if (cdns_uart_uart_driver.cons->index == -1)
+		console_port = port;
+#endif
+
 	rc = uart_add_one_port(&cdns_uart_uart_driver, port);
 	if (rc) {
 		dev_err(&pdev->dev,
@@ -1586,6 +1556,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		goto err_out_pm_disable;
 	}
 
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/* This is not port which is used for console that's why clean it up */
+	if (cdns_uart_uart_driver.cons->index == -1)
+		console_port = NULL;
+#endif
+
 	return 0;
 
 err_out_pm_disable:
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index f97251f39c26..1eb1a376a041 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1178,15 +1178,8 @@ static void csi_J(struct vc_data *vc, int vpar)
 			count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
 			start = (unsigned short *)vc->vc_origin;
 			break;
-		case 3: /* erase scroll-back buffer (and whole display) */
-			scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
-				    vc->vc_screenbuf_size);
-			flush_scrollback(vc);
-			set_origin(vc);
-			if (con_is_visible(vc))
-				update_screen(vc);
-			/* fall through */
 		case 2: /* erase whole display */
+		case 3: /* (and scrollback buffer later) */
 			count = vc->vc_cols * vc->vc_rows;
 			start = (unsigned short *)vc->vc_origin;
 			break;
@@ -1194,7 +1187,12 @@ static void csi_J(struct vc_data *vc, int vpar)
 			return;
 	}
 	scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
-	if (con_should_update(vc))
+	if (vpar == 3) {
+		set_origin(vc);
+		flush_scrollback(vc);
+		if (con_is_visible(vc))
+			update_screen(vc);
+	} else if (con_should_update(vc))
 		do_update_region(vc, (unsigned long) start, count);
 	vc->vc_need_wrap = 0;
 }