tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 86 insertions, 0 deletions

diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h
new file mode 100644
index 000000000000..6d06ce1d5675
--- /dev/null
+++ b/drivers/tty/serial/bfin_sport_uart.h
@@ -0,0 +1,86 @@
+/*
+ * Blackfin On-Chip Sport Emulated UART Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/*
+ * This driver and the hardware supported are in term of EE-191 of ADI.
+ * http://www.analog.com/static/imported-files/application_notes/EE191.pdf 
+ * This application note describe how to implement a UART on a Sharc DSP,
+ * but this driver is implemented on Blackfin Processor.
+ * Transmit Frame Sync is not used by this driver to transfer data out.
+ */
+
+#ifndef _BFIN_SPORT_UART_H
+#define _BFIN_SPORT_UART_H
+
+#define OFFSET_TCR1		0x00	/* Transmit Configuration 1 Register */
+#define OFFSET_TCR2		0x04	/* Transmit Configuration 2 Register */
+#define OFFSET_TCLKDIV		0x08	/* Transmit Serial Clock Divider Register */
+#define OFFSET_TFSDIV		0x0C	/* Transmit Frame Sync Divider Register */
+#define OFFSET_TX		0x10	/* Transmit Data Register		*/
+#define OFFSET_RX		0x18	/* Receive Data Register		*/
+#define OFFSET_RCR1		0x20	/* Receive Configuration 1 Register	*/
+#define OFFSET_RCR2		0x24	/* Receive Configuration 2 Register	*/
+#define OFFSET_RCLKDIV		0x28	/* Receive Serial Clock Divider Register */
+#define OFFSET_RFSDIV		0x2c	/* Receive Frame Sync Divider Register */
+#define OFFSET_STAT		0x30	/* Status Register			*/
+
+#define SPORT_GET_TCR1(sport)		bfin_read16(((sport)->port.membase + OFFSET_TCR1))
+#define SPORT_GET_TCR2(sport)		bfin_read16(((sport)->port.membase + OFFSET_TCR2))
+#define SPORT_GET_TCLKDIV(sport)	bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV))
+#define SPORT_GET_TFSDIV(sport)		bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
+#define SPORT_GET_TX(sport)		bfin_read16(((sport)->port.membase + OFFSET_TX))
+#define SPORT_GET_RX(sport)		bfin_read16(((sport)->port.membase + OFFSET_RX))
+/*
+ * If another interrupt fires while doing a 32-bit read from RX FIFO,
+ * a fake RX underflow error will be generated.  So disable interrupts
+ * to prevent interruption while reading the FIFO.
+ */
+#define SPORT_GET_RX32(sport) \
+({ \
+	unsigned int __ret; \
+	if (ANOMALY_05000473) \
+		local_irq_disable(); \
+	__ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
+	if (ANOMALY_05000473) \
+		local_irq_enable(); \
+	__ret; \
+})
+#define SPORT_GET_RCR1(sport)		bfin_read16(((sport)->port.membase + OFFSET_RCR1))
+#define SPORT_GET_RCR2(sport)		bfin_read16(((sport)->port.membase + OFFSET_RCR2))
+#define SPORT_GET_RCLKDIV(sport)	bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
+#define SPORT_GET_RFSDIV(sport)		bfin_read16(((sport)->port.membase + OFFSET_RFSDIV))
+#define SPORT_GET_STAT(sport)		bfin_read16(((sport)->port.membase + OFFSET_STAT))
+
+#define SPORT_PUT_TCR1(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_TCR1), v)
+#define SPORT_PUT_TCR2(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_TCR2), v)
+#define SPORT_PUT_TCLKDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v)
+#define SPORT_PUT_TFSDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v)
+#define SPORT_PUT_TX(sport, v)		bfin_write16(((sport)->port.membase + OFFSET_TX), v)
+#define SPORT_PUT_RX(sport, v)		bfin_write16(((sport)->port.membase + OFFSET_RX), v)
+#define SPORT_PUT_RCR1(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RCR1), v)
+#define SPORT_PUT_RCR2(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RCR2), v)
+#define SPORT_PUT_RCLKDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
+#define SPORT_PUT_RFSDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
+#define SPORT_PUT_STAT(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
+
+#define SPORT_TX_FIFO_SIZE	8
+
+#define SPORT_UART_GET_CTS(x)		gpio_get_value(x->cts_pin)
+#define SPORT_UART_DISABLE_RTS(x)	gpio_set_value(x->rts_pin, 1)
+#define SPORT_UART_ENABLE_RTS(x)	gpio_set_value(x->rts_pin, 0)
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS)
+# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+#endif
+
+#endif /* _BFIN_SPORT_UART_H */