summaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx/aic7xxx_pci.c
diff options
context:
space:
mode:
authorPekka Enberg <penberg@cs.helsinki.fi>2010-07-14 14:12:57 +0400
committerJames Bottomley <James.Bottomley@suse.de>2010-07-28 18:05:27 +0400
commit48813cf989eb8695fe84df30207fc8ff5f15783c (patch)
tree031eb09af4f435faa285f863416bece80e9d2193 /drivers/scsi/aic7xxx/aic7xxx_pci.c
parent660bdddb52843d361e47c30294366ae0deac821b (diff)
downloadlinux-48813cf989eb8695fe84df30207fc8ff5f15783c.tar.xz
[SCSI] aic7xxx: Remove OS utility wrappers
This patch removes malloc(), free(), and printf() wrappers from the aic7xxx SCSI driver. I didn't use pr_debug for printf because of some 'clever' uses of printf don't compile with the pr_debug. I didn't fix the overeager uses of GFP_ATOMIC either because I wanted to keep this patch as simple as possible. [jejb:fixed up checkpatch errors and fixed up missed conversion] Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx_pci.c')
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_pci.c74
1 files changed, 37 insertions, 37 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 27014b9de126..2b11a4272364 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -752,7 +752,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
if (bootverbose)
- printf("%s: Enabling 39Bit Addressing\n",
+ printk("%s: Enabling 39Bit Addressing\n",
ahc_name(ahc));
devconfig |= DACEN;
}
@@ -896,7 +896,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
/* See if someone else set us up already */
if ((ahc->flags & AHC_NO_BIOS_INIT) == 0
&& scsiseq != 0) {
- printf("%s: Using left over BIOS settings\n",
+ printk("%s: Using left over BIOS settings\n",
ahc_name(ahc));
ahc->flags &= ~AHC_USEDEFAULTS;
ahc->flags |= AHC_BIOS_ENABLED;
@@ -1155,7 +1155,7 @@ done:
ahc_outb(ahc, CLRINT, CLRPARERR);
ahc_outb(ahc, CLRINT, CLRBRKADRINT);
if (bootverbose && enable) {
- printf("%s: External SRAM, %s access%s, %dbytes/SCB\n",
+ printk("%s: External SRAM, %s access%s, %dbytes/SCB\n",
ahc_name(ahc), fast ? "fast" : "slow",
pcheck ? ", parity checking enabled" : "",
large ? 64 : 32);
@@ -1292,7 +1292,7 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
if (have_seeprom) {
if (bootverbose)
- printf("%s: Reading SEEPROM...", ahc_name(ahc));
+ printk("%s: Reading SEEPROM...", ahc_name(ahc));
for (;;) {
u_int start_addr;
@@ -1309,9 +1309,9 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
if (have_seeprom != 0 || sd.sd_chip == C56_66) {
if (bootverbose) {
if (have_seeprom == 0)
- printf ("checksum error\n");
+ printk ("checksum error\n");
else
- printf ("done.\n");
+ printk ("done.\n");
}
break;
}
@@ -1362,9 +1362,9 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
if (!have_seeprom) {
if (bootverbose)
- printf("%s: No SEEPROM available.\n", ahc_name(ahc));
+ printk("%s: No SEEPROM available.\n", ahc_name(ahc));
ahc->flags |= AHC_USEDEFAULTS;
- free(ahc->seep_config, M_DEVBUF);
+ kfree(ahc->seep_config);
ahc->seep_config = NULL;
sc = NULL;
} else {
@@ -1399,7 +1399,7 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
if ((sc->adapter_control & CFSTERM) != 0)
*sxfrctl1 |= STPWEN;
if (bootverbose)
- printf("%s: Low byte termination %sabled\n",
+ printk("%s: Low byte termination %sabled\n",
ahc_name(ahc),
(*sxfrctl1 & STPWEN) ? "en" : "dis");
}
@@ -1569,7 +1569,7 @@ configure_termination(struct ahc_softc *ahc,
&eeprom_present);
if ((adapter_control & CFSEAUTOTERM) == 0) {
if (bootverbose)
- printf("%s: Manual SE Termination\n",
+ printk("%s: Manual SE Termination\n",
ahc_name(ahc));
enableSEC_low = (adapter_control & CFSELOWTERM);
enableSEC_high =
@@ -1577,7 +1577,7 @@ configure_termination(struct ahc_softc *ahc,
}
if ((adapter_control & CFAUTOTERM) == 0) {
if (bootverbose)
- printf("%s: Manual LVD Termination\n",
+ printk("%s: Manual LVD Termination\n",
ahc_name(ahc));
enablePRI_low = (adapter_control & CFSTERM);
enablePRI_high = (adapter_control & CFWSTERM);
@@ -1604,19 +1604,19 @@ configure_termination(struct ahc_softc *ahc,
if (bootverbose
&& (ahc->features & AHC_ULTRA2) == 0) {
- printf("%s: internal 50 cable %s present",
+ printk("%s: internal 50 cable %s present",
ahc_name(ahc),
internal50_present ? "is":"not");
if ((ahc->features & AHC_WIDE) != 0)
- printf(", internal 68 cable %s present",
+ printk(", internal 68 cable %s present",
internal68_present ? "is":"not");
- printf("\n%s: external cable %s present\n",
+ printk("\n%s: external cable %s present\n",
ahc_name(ahc),
externalcable_present ? "is":"not");
}
if (bootverbose)
- printf("%s: BIOS eeprom %s present\n",
+ printk("%s: BIOS eeprom %s present\n",
ahc_name(ahc), eeprom_present ? "is" : "not");
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) {
@@ -1642,7 +1642,7 @@ configure_termination(struct ahc_softc *ahc,
&& (internal50_present != 0)
&& (internal68_present != 0)
&& (externalcable_present != 0)) {
- printf("%s: Illegal cable configuration!!. "
+ printk("%s: Illegal cable configuration!!. "
"Only two connectors on the "
"adapter may be used at a "
"time!\n", ahc_name(ahc));
@@ -1664,10 +1664,10 @@ configure_termination(struct ahc_softc *ahc,
brddat |= BRDDAT6;
if (bootverbose) {
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
- printf("%s: 68 pin termination "
+ printk("%s: 68 pin termination "
"Enabled\n", ahc_name(ahc));
else
- printf("%s: %sHigh byte termination "
+ printk("%s: %sHigh byte termination "
"Enabled\n", ahc_name(ahc),
enableSEC_high ? "Secondary "
: "");
@@ -1683,10 +1683,10 @@ configure_termination(struct ahc_softc *ahc,
*sxfrctl1 |= STPWEN;
if (bootverbose) {
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
- printf("%s: 50 pin termination "
+ printk("%s: 50 pin termination "
"Enabled\n", ahc_name(ahc));
else
- printf("%s: %sLow byte termination "
+ printk("%s: %sLow byte termination "
"Enabled\n", ahc_name(ahc),
enableSEC_low ? "Secondary "
: "");
@@ -1696,7 +1696,7 @@ configure_termination(struct ahc_softc *ahc,
if (enablePRI_low != 0) {
*sxfrctl1 |= STPWEN;
if (bootverbose)
- printf("%s: Primary Low Byte termination "
+ printk("%s: Primary Low Byte termination "
"Enabled\n", ahc_name(ahc));
}
@@ -1709,7 +1709,7 @@ configure_termination(struct ahc_softc *ahc,
if (enablePRI_high != 0) {
brddat |= BRDDAT4;
if (bootverbose)
- printf("%s: Primary High Byte "
+ printk("%s: Primary High Byte "
"termination Enabled\n",
ahc_name(ahc));
}
@@ -1721,7 +1721,7 @@ configure_termination(struct ahc_softc *ahc,
*sxfrctl1 |= STPWEN;
if (bootverbose)
- printf("%s: %sLow byte termination Enabled\n",
+ printk("%s: %sLow byte termination Enabled\n",
ahc_name(ahc),
(ahc->features & AHC_ULTRA2) ? "Primary "
: "");
@@ -1731,7 +1731,7 @@ configure_termination(struct ahc_softc *ahc,
&& (ahc->features & AHC_WIDE) != 0) {
brddat |= BRDDAT6;
if (bootverbose)
- printf("%s: %sHigh byte termination Enabled\n",
+ printk("%s: %sHigh byte termination Enabled\n",
ahc_name(ahc),
(ahc->features & AHC_ULTRA2)
? "Secondary " : "");
@@ -1937,29 +1937,29 @@ ahc_pci_intr(struct ahc_softc *ahc)
status1 = ahc_pci_read_config(ahc->dev_softc,
PCIR_STATUS + 1, /*bytes*/1);
- printf("%s: PCI error Interrupt at seqaddr = 0x%x\n",
+ printk("%s: PCI error Interrupt at seqaddr = 0x%x\n",
ahc_name(ahc),
ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
if (status1 & DPE) {
ahc->pci_target_perr_count++;
- printf("%s: Data Parity Error Detected during address "
+ printk("%s: Data Parity Error Detected during address "
"or write data phase\n", ahc_name(ahc));
}
if (status1 & SSE) {
- printf("%s: Signal System Error Detected\n", ahc_name(ahc));
+ printk("%s: Signal System Error Detected\n", ahc_name(ahc));
}
if (status1 & RMA) {
- printf("%s: Received a Master Abort\n", ahc_name(ahc));
+ printk("%s: Received a Master Abort\n", ahc_name(ahc));
}
if (status1 & RTA) {
- printf("%s: Received a Target Abort\n", ahc_name(ahc));
+ printk("%s: Received a Target Abort\n", ahc_name(ahc));
}
if (status1 & STA) {
- printf("%s: Signaled a Target Abort\n", ahc_name(ahc));
+ printk("%s: Signaled a Target Abort\n", ahc_name(ahc));
}
if (status1 & DPR) {
- printf("%s: Data Parity Error has been reported via PERR#\n",
+ printk("%s: Data Parity Error has been reported via PERR#\n",
ahc_name(ahc));
}
@@ -1968,14 +1968,14 @@ ahc_pci_intr(struct ahc_softc *ahc)
status1, /*bytes*/1);
if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) {
- printf("%s: Latched PCIERR interrupt with "
+ printk("%s: Latched PCIERR interrupt with "
"no status bits set\n", ahc_name(ahc));
} else {
ahc_outb(ahc, CLRINT, CLRPARERR);
}
if (ahc->pci_target_perr_count > AHC_PCI_TARGET_PERR_THRESH) {
- printf(
+ printk(
"%s: WARNING WARNING WARNING WARNING\n"
"%s: Too many PCI parity errors observed as a target.\n"
"%s: Some device on this bus is generating bad parity.\n"
@@ -2386,7 +2386,7 @@ ahc_aha29160C_setup(struct ahc_softc *ahc)
static int
ahc_raid_setup(struct ahc_softc *ahc)
{
- printf("RAID functionality unsupported\n");
+ printk("RAID functionality unsupported\n");
return (ENXIO);
}
@@ -2404,7 +2404,7 @@ ahc_aha394XX_setup(struct ahc_softc *ahc)
ahc->channel = 'B';
break;
default:
- printf("adapter at unexpected slot %d\n"
+ printk("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
ahc->channel = 'A';
@@ -2429,7 +2429,7 @@ ahc_aha398XX_setup(struct ahc_softc *ahc)
ahc->channel = 'C';
break;
default:
- printf("adapter at unexpected slot %d\n"
+ printk("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
ahc->channel = 'A';
@@ -2459,7 +2459,7 @@ ahc_aha494XX_setup(struct ahc_softc *ahc)
ahc->channel = 'D';
break;
default:
- printf("adapter at unexpected slot %d\n"
+ printk("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
ahc->channel = 'A';