summaryrefslogtreecommitdiff
path: root/drivers/reset
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-09-02 01:25:28 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-09-02 01:25:28 +0300
commit866147b8fa59530812fc769027a94468d89401e7 (patch)
tree1d97cf66b7db6765570ba824c51bd3dc84b561fc /drivers/reset
parent634135a07b887a8ad8904da8c147407650747a38 (diff)
parent06779631d18ff2901af604eadea0d7b2193db7a1 (diff)
downloadlinux-866147b8fa59530812fc769027a94468d89401e7.tar.xz
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
Diffstat (limited to 'drivers/reset')
-rw-r--r--drivers/reset/Kconfig8
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/reset-qcom-pdc.c62
-rw-r--r--drivers/reset/reset-rzg2l-usbphy-ctrl.c175
4 files changed, 234 insertions, 12 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 5656cac04b4c..be799a5abf8a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -181,6 +181,13 @@ config RESET_RASPBERRYPI
interfacing with RPi4's co-processor and model these firmware
initialization routines as reset lines.
+config RESET_RZG2L_USBPHY_CTRL
+ tristate "Renesas RZ/G2L USBPHY control driver"
+ depends on ARCH_R9A07G044 || COMPILE_TEST
+ help
+ Support for USBPHY Control found on RZ/G2L family. It mainly
+ controls reset and power down of the USB/PHY.
+
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
@@ -207,7 +214,6 @@ config RESET_SIMPLE
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- - ZTE's zx2967 family
- SiFive FU740 SoCs
config RESET_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index ea8b8d9ca565..21d46d8869ff 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
+obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
index ab74bccd4a5b..f22bb49a4ac8 100644
--- a/drivers/reset/reset-qcom-pdc.c
+++ b/drivers/reset/reset-qcom-pdc.c
@@ -11,18 +11,26 @@
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
-#define RPMH_PDC_SYNC_RESET 0x100
+#define RPMH_SDM845_PDC_SYNC_RESET 0x100
+#define RPMH_SC7280_PDC_SYNC_RESET 0x1000
struct qcom_pdc_reset_map {
u8 bit;
};
+struct qcom_pdc_reset_desc {
+ const struct qcom_pdc_reset_map *resets;
+ size_t num_resets;
+ unsigned int offset;
+};
+
struct qcom_pdc_reset_data {
struct reset_controller_dev rcdev;
struct regmap *regmap;
+ const struct qcom_pdc_reset_desc *desc;
};
-static const struct regmap_config sdm845_pdc_regmap_config = {
+static const struct regmap_config pdc_regmap_config = {
.name = "pdc-reset",
.reg_bits = 32,
.reg_stride = 4,
@@ -44,6 +52,33 @@ static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
[PDC_MODEM_SYNC_RESET] = {9},
};
+static const struct qcom_pdc_reset_desc sdm845_pdc_reset_desc = {
+ .resets = sdm845_pdc_resets,
+ .num_resets = ARRAY_SIZE(sdm845_pdc_resets),
+ .offset = RPMH_SDM845_PDC_SYNC_RESET,
+};
+
+static const struct qcom_pdc_reset_map sc7280_pdc_resets[] = {
+ [PDC_APPS_SYNC_RESET] = {0},
+ [PDC_SP_SYNC_RESET] = {1},
+ [PDC_AUDIO_SYNC_RESET] = {2},
+ [PDC_SENSORS_SYNC_RESET] = {3},
+ [PDC_AOP_SYNC_RESET] = {4},
+ [PDC_DEBUG_SYNC_RESET] = {5},
+ [PDC_GPU_SYNC_RESET] = {6},
+ [PDC_DISPLAY_SYNC_RESET] = {7},
+ [PDC_COMPUTE_SYNC_RESET] = {8},
+ [PDC_MODEM_SYNC_RESET] = {9},
+ [PDC_WLAN_RF_SYNC_RESET] = {10},
+ [PDC_WPSS_SYNC_RESET] = {11},
+};
+
+static const struct qcom_pdc_reset_desc sc7280_pdc_reset_desc = {
+ .resets = sc7280_pdc_resets,
+ .num_resets = ARRAY_SIZE(sc7280_pdc_resets),
+ .offset = RPMH_SC7280_PDC_SYNC_RESET,
+};
+
static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
struct reset_controller_dev *rcdev)
{
@@ -54,19 +89,18 @@ static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+ u32 mask = BIT(data->desc->resets[idx].bit);
- return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
- BIT(sdm845_pdc_resets[idx].bit),
- BIT(sdm845_pdc_resets[idx].bit));
+ return regmap_update_bits(data->regmap, data->desc->offset, mask, mask);
}
static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+ u32 mask = BIT(data->desc->resets[idx].bit);
- return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
- BIT(sdm845_pdc_resets[idx].bit), 0);
+ return regmap_update_bits(data->regmap, data->desc->offset, mask, 0);
}
static const struct reset_control_ops qcom_pdc_reset_ops = {
@@ -76,22 +110,27 @@ static const struct reset_control_ops qcom_pdc_reset_ops = {
static int qcom_pdc_reset_probe(struct platform_device *pdev)
{
+ const struct qcom_pdc_reset_desc *desc;
struct qcom_pdc_reset_data *data;
struct device *dev = &pdev->dev;
void __iomem *base;
struct resource *res;
+ desc = device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
+ data->desc = desc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
- data->regmap = devm_regmap_init_mmio(dev, base,
- &sdm845_pdc_regmap_config);
+ data->regmap = devm_regmap_init_mmio(dev, base, &pdc_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(dev, "Unable to initialize regmap\n");
return PTR_ERR(data->regmap);
@@ -99,14 +138,15 @@ static int qcom_pdc_reset_probe(struct platform_device *pdev)
data->rcdev.owner = THIS_MODULE;
data->rcdev.ops = &qcom_pdc_reset_ops;
- data->rcdev.nr_resets = ARRAY_SIZE(sdm845_pdc_resets);
+ data->rcdev.nr_resets = desc->num_resets;
data->rcdev.of_node = dev->of_node;
return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct of_device_id qcom_pdc_reset_of_match[] = {
- { .compatible = "qcom,sdm845-pdc-global" },
+ { .compatible = "qcom,sc7280-pdc-global", .data = &sc7280_pdc_reset_desc },
+ { .compatible = "qcom,sdm845-pdc-global", .data = &sdm845_pdc_reset_desc },
{}
};
MODULE_DEVICE_TABLE(of, qcom_pdc_reset_of_match);
diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
new file mode 100644
index 000000000000..e0704fd2b533
--- /dev/null
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L USBPHY control driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/reset-controller.h>
+
+#define RESET 0x000
+
+#define RESET_SEL_PLLRESET BIT(12)
+#define RESET_PLLRESET BIT(8)
+
+#define RESET_SEL_P2RESET BIT(5)
+#define RESET_SEL_P1RESET BIT(4)
+#define RESET_PHYRST_2 BIT(1)
+#define RESET_PHYRST_1 BIT(0)
+
+#define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2)
+#define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1)
+
+#define NUM_PORTS 2
+
+struct rzg2l_usbphy_ctrl_priv {
+ struct reset_controller_dev rcdev;
+ struct reset_control *rstc;
+ void __iomem *base;
+
+ spinlock_t lock;
+};
+
+#define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev)
+
+static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2;
+ void __iomem *base = priv->base;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(base + RESET);
+ val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+ if (port_mask == (val & port_mask))
+ val |= RESET_PLLRESET;
+ writel(val, base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ void __iomem *base = priv->base;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(base + RESET);
+
+ val |= RESET_SEL_PLLRESET;
+ val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1));
+ writel(val, base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+ u32 port_mask;
+
+ port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+
+ return !!(readl(priv->base + RESET) & port_mask);
+}
+
+static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
+ { .compatible = "renesas,rzg2l-usbphy-ctrl" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
+
+static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
+ .assert = rzg2l_usbphy_ctrl_assert,
+ .deassert = rzg2l_usbphy_ctrl_deassert,
+ .status = rzg2l_usbphy_ctrl_status,
+};
+
+static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rzg2l_usbphy_ctrl_priv *priv;
+ unsigned long flags;
+ int error;
+ u32 val;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc))
+ return dev_err_probe(dev, PTR_ERR(priv->rstc),
+ "failed to get reset\n");
+
+ reset_control_deassert(priv->rstc);
+
+ priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.nr_resets = NUM_PORTS;
+ priv->rcdev.of_node = dev->of_node;
+ priv->rcdev.dev = dev;
+
+ error = devm_reset_controller_register(dev, &priv->rcdev);
+ if (error)
+ return error;
+
+ spin_lock_init(&priv->lock);
+ dev_set_drvdata(dev, priv);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume_and_get(&pdev->dev);
+
+ /* put pll and phy into reset state */
+ spin_lock_irqsave(&priv->lock, flags);
+ val = readl(priv->base + RESET);
+ val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1;
+ writel(val, priv->base + RESET);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)
+{
+ struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ reset_control_assert(priv->rstc);
+
+ return 0;
+}
+
+static struct platform_driver rzg2l_usbphy_ctrl_driver = {
+ .driver = {
+ .name = "rzg2l_usbphy_ctrl",
+ .of_match_table = rzg2l_usbphy_ctrl_match_table,
+ },
+ .probe = rzg2l_usbphy_ctrl_probe,
+ .remove = rzg2l_usbphy_ctrl_remove,
+};
+module_platform_driver(rzg2l_usbphy_ctrl_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
+MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");