PCI/PM: Use per-device D3 delays

It turns out that some PCI devices require extra delays when changing
power state from D3 to D0 (and the other way around).  Although this
is against the PCI specification, we can handle it quite easily by
allowing drivers to define arbitrary D3 delays for devices known to
require extra time for switching power states.

Introduce additional field d3_delay in struct pci_dev and use it to
store the value of the device's D0->D3 delay, in miliseconds.  Make
the PCI PM core code use the per-device d3_delay unless
pci_pm_d3_delay is greater (in which case the latter is used).
[This also allows the driver to specify d3_delay shorter than the
 10 ms required by the PCI standard if the device is known to be able
 to handle that.]

Make the sky2 driver set d3_delay to 150 for devices handled by it.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a
listed regression from 2.6.30.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

1 files changed, 15 insertions, 4 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 0906599ebfde..315fea47e784 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -29,7 +29,17 @@ const char *pci_power_names[] = {
 };
 EXPORT_SYMBOL_GPL(pci_power_names);
 
-unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
+unsigned int pci_pm_d3_delay;
+
+static void pci_dev_d3_sleep(struct pci_dev *dev)
+{
+	unsigned int delay = dev->d3_delay;
+
+	if (delay < pci_pm_d3_delay)
+		delay = pci_pm_d3_delay;
+
+	msleep(delay);
+}
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -522,7 +532,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-		msleep(pci_pm_d3_delay);
+		pci_dev_d3_sleep(dev);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(PCI_PM_D2_DELAY);
 
@@ -1409,6 +1419,7 @@ void pci_pm_init(struct pci_dev *dev)
 	}
 
 	dev->pm_cap = pm;
+	dev->d3_delay = PCI_PM_D3_WAIT;
 
 	dev->d1_support = false;
 	dev->d2_support = false;
@@ -2247,12 +2258,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D3hot;
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
-	msleep(pci_pm_d3_delay);
+	pci_dev_d3_sleep(dev);
 
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D0;
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
-	msleep(pci_pm_d3_delay);
+	pci_dev_d3_sleep(dev);
 
 	return 0;
 }