diff options
| author | Benjamin Li <benl@squareup.com> | 2021-10-27 20:03:05 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-01-27 13:03:05 +0300 |
| commit | a33fc07affe582f2263f8ee8fbcb9778888e48b3 (patch) | |
| tree | e08b40f5a3c393743365b45cbbba06ca1bf1ee1f /drivers/net/wireless/ath/wcn36xx/wcn36xx.h | |
| parent | 8c3830446ccc6073140fa80056f361c65083db11 (diff) | |
| download | linux-a33fc07affe582f2263f8ee8fbcb9778888e48b3.tar.xz | |
wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
[ Upstream commit 8f1ba8b0ee2679f0b3d22d2a5c1bc70c436fd872 ]
An SMD capture from the downstream prima driver on WCN3680B shows the
following command sequence for connected scans:
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- start_scan_req, channel 2
- ...
- end_scan_req, channel 3
- finish_scan_req
- init_scan_req
- start_scan_req, channel 4
- ...
- end_scan_req, channel 6
- finish_scan_req
- ...
- end_scan_req, channel 165
- finish_scan_req
Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1]
still sends finish_scan_req twice in a row or before init_scan_req. A
typical connected scan looks like this:
- init_scan_req
- start_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- ...
- start_scan_req, channel 165
- finish_scan_req
- finish_scan_req
This patch cleans up scanning so that init/finish and start/end are always
paired together and correctly nested.
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- end_scan_req, channel 2
- ...
- start_scan_req, channel 165
- end_scan_req, channel 165
- finish_scan_req
Note that upstream will not do batching of 3 active-probe scans before
returning to the operating channel, and this patch does not change that.
To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or
the 125ms max off-channel time in ieee80211_scan_state_decision.
[1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested
before start scan") addressed one case of finish_scan_req being sent
without a preceding init_scan_req (the case of the operating channel
coinciding with the first scan channel); two other cases are:
1) if SW scan is started and aborted immediately, without scanning any
channels, we send a finish_scan_req without ever sending init_scan_req,
and
2) as SW scan logic always returns us to the operating channel before
calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice
at the end of a SW scan
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027170306.555535-4-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/net/wireless/ath/wcn36xx/wcn36xx.h')
| -rw-r--r-- | drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h index e9560f35e9bc..428546a6047f 100644 --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h @@ -246,6 +246,7 @@ struct wcn36xx { struct cfg80211_scan_request *scan_req; bool sw_scan; u8 sw_scan_opchannel; + bool sw_scan_init; u8 sw_scan_channel; struct ieee80211_vif *sw_scan_vif; struct mutex scan_lock; |