Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
new file mode 100644
index 000000000000..6dff5a0e733f
--- /dev/null
+++ b/drivers/net/ethernet/Kconfig
@@ -0,0 +1,177 @@
+#
+# Ethernet LAN device configuration
+#
+
+menuconfig ETHERNET
+	bool "Ethernet driver support"
+	depends on NET
+	default y
+	---help---
+	  This section contains all the Ethernet device drivers.
+
+if ETHERNET
+
+config MDIO
+	tristate
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/adaptec/Kconfig"
+source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/alteon/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/cadence/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/brocade/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
+source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/davicom/Kconfig"
+
+config DNET
+	tristate "Dave ethernet support (DNET)"
+	depends on HAS_IOMEM
+	select PHYLIB
+	---help---
+	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+	  Say Y to include support for the DNET chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dnet.
+
+source "drivers/net/ethernet/dec/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
+source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/freescale/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
+source "drivers/net/ethernet/hp/Kconfig"
+source "drivers/net/ethernet/ibm/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/icplus/Kconfig"
+
+config JME
+	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select NET_CORE
+	select MII
+	---help---
+	  This driver supports the PCI-Express gigabit ethernet adapters
+	  based on JMicron JMC250 chipset.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called jme.
+
+config KORINA
+	tristate "Korina (IDT RC32434) Ethernet support"
+	depends on MIKROTIK_RB532
+	---help---
+	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
+	  based system say Y. Otherwise say N.
+
+config LANTIQ_ETOP
+	tristate "Lantiq SoC ETOP driver"
+	depends on SOC_TYPE_XWAY
+	---help---
+	  Support for the MII0 inside the Lantiq SoC
+
+source "drivers/net/ethernet/marvell/Kconfig"
+source "drivers/net/ethernet/mellanox/Kconfig"
+source "drivers/net/ethernet/micrel/Kconfig"
+source "drivers/net/ethernet/microchip/Kconfig"
+
+config MIPS_SIM_NET
+	tristate "MIPS simulator Network device"
+	depends on MIPS_SIM
+	---help---
+	  The MIPSNET device is a simple Ethernet network device which is
+	  emulated by the MIPS Simulator.
+	  If you are not using a MIPSsim or are unsure, say N.
+
+source "drivers/net/ethernet/myricom/Kconfig"
+
+config FEALNX
+	tristate "Myson MTD-8xx PCI Ethernet support"
+	depends on PCI
+	select CRC32
+	select NET_CORE
+	select MII
+	---help---
+	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
+	  cards. <http://www.myson.com.tw/>
+
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
+
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select NET_CORE
+	select MII
+	depends on ARCH_NETX
+	---help---
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called netx-eth.
+
+source "drivers/net/ethernet/nuvoton/Kconfig"
+source "drivers/net/ethernet/nvidia/Kconfig"
+source "drivers/net/ethernet/octeon/Kconfig"
+source "drivers/net/ethernet/oki-semi/Kconfig"
+
+config ETHOC
+	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+	depends on HAS_IOMEM && HAS_DMA
+	select NET_CORE
+	select MII
+	select PHYLIB
+	select CRC32
+	select BITREVERSE
+	---help---
+	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
+source "drivers/net/ethernet/packetengines/Kconfig"
+source "drivers/net/ethernet/pasemi/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
+source "drivers/net/ethernet/renesas/Kconfig"
+source "drivers/net/ethernet/rdc/Kconfig"
+
+config S6GMAC
+	tristate "S6105 GMAC ethernet support"
+	depends on XTENSA_VARIANT_S6000
+	select PHYLIB
+	---help---
+	  This driver supports the on chip ethernet device on the
+	  S6105 xtensa processor.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s6gmac.
+
+source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
+source "drivers/net/ethernet/sfc/Kconfig"
+source "drivers/net/ethernet/sgi/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/stmicro/Kconfig"
+source "drivers/net/ethernet/sun/Kconfig"
+source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
+source "drivers/net/ethernet/tile/Kconfig"
+source "drivers/net/ethernet/toshiba/Kconfig"
+source "drivers/net/ethernet/tundra/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
+source "drivers/net/ethernet/xircom/Kconfig"
+
+endif # ETHERNET