Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

17 files changed, 3351 insertions, 124 deletions

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 9e7d95dae2c7..41688229c570 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -65,7 +65,7 @@ config CAN_LEDS
 
 config CAN_AT91
 	tristate "Atmel AT91 onchip CAN controller"
-	depends on ARM
+	depends on ARCH_AT91 || COMPILE_TEST
 	---help---
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
 	  and AT91SAM9X5 processors.
@@ -77,12 +77,6 @@ config CAN_TI_HECC
 	  Driver for TI HECC (High End CAN Controller) module found on many
 	  TI devices. The device specifications are available from www.ti.com
 
-config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
-	depends on SPI && HAS_DMA
-	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
-
 config CAN_BFIN
 	depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
 	tristate "Analog Devices Blackfin on-chip CAN"
@@ -110,7 +104,7 @@ config CAN_FLEXCAN
 
 config PCH_CAN
 	tristate "Intel EG20T PCH CAN controller"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	---help---
 	  This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
 	  is an IOH for x86 embedded processor (Intel Atom E6xx series).
@@ -125,6 +119,24 @@ config CAN_GRCAN
 	  endian syntheses of the cores would need some modifications on
 	  the hardware level to work.
 
+config CAN_RCAR
+	tristate "Renesas R-Car CAN controller"
+	depends on ARM
+	---help---
+	  Say Y here if you want to use CAN controller found on Renesas R-Car
+	  SoCs.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rcar_can.
+
+config CAN_XILINXCAN
+	tristate "Xilinx CAN"
+	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
+	depends on COMMON_CLK && HAS_IOMEM
+	---help---
+	  Xilinx CAN driver. This driver supports both soft AXI CAN IP and
+	  Zynq CANPS IP.
+
 source "drivers/net/can/mscan/Kconfig"
 
 source "drivers/net/can/sja1000/Kconfig"
@@ -133,6 +145,8 @@ source "drivers/net/can/c_can/Kconfig"
 
 source "drivers/net/can/cc770/Kconfig"
 
+source "drivers/net/can/spi/Kconfig"
+
 source "drivers/net/can/usb/Kconfig"
 
 source "drivers/net/can/softing/Kconfig"
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index c7440392adbb..1697f22353a9 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -10,6 +10,7 @@ can-dev-y			:= dev.o
 
 can-dev-$(CONFIG_CAN_LEDS)	+= led.o
 
+obj-y				+= spi/
 obj-y				+= usb/
 obj-y				+= softing/
 
@@ -19,11 +20,12 @@ obj-$(CONFIG_CAN_C_CAN)		+= c_can/
 obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
-obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
 obj-$(CONFIG_CAN_BFIN)		+= bfin_can.o
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan.o
 obj-$(CONFIG_PCH_CAN)		+= pch_can.o
 obj-$(CONFIG_CAN_GRCAN)		+= grcan.o
+obj-$(CONFIG_CAN_RCAR)		+= rcar_can.o
+obj-$(CONFIG_CAN_XILINXCAN)	+= xilinx_can.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 95e04e2002da..8e78bb48f5a4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -252,8 +252,7 @@ static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj
 	struct c_can_priv *priv = netdev_priv(dev);
 	int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface);
 
-	priv->write_reg(priv, reg + 1, cmd);
-	priv->write_reg(priv, reg, obj);
+	priv->write_reg32(priv, reg, (cmd << 16) | obj);
 
 	for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) {
 		if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY))
@@ -328,8 +327,7 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface,
 		change_bit(idx, &priv->tx_dir);
 	}
 
-	priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
-	priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), arb >> 16);
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
 
 	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
 
@@ -391,8 +389,7 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl)
 
 	frame->can_dlc = get_can_dlc(ctrl & 0x0F);
 
-	arb = priv->read_reg(priv, C_CAN_IFACE(ARB1_REG, iface));
-	arb |= priv->read_reg(priv, C_CAN_IFACE(ARB2_REG, iface)) << 16;
+	arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface));
 
 	if (arb & IF_ARB_MSGXTD)
 		frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG;
@@ -424,12 +421,10 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface,
 	struct c_can_priv *priv = netdev_priv(dev);
 
 	mask |= BIT(29);
-	priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
-	priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), mask >> 16);
+	priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
 
 	id |= IF_ARB_MSGVAL;
-	priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), id);
-	priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), id >> 16);
+	priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id);
 
 	priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont);
 	c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index c56f1b1c11ca..99ad1aa576b0 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -78,6 +78,7 @@ enum reg {
 	C_CAN_INTPND2_REG,
 	C_CAN_MSGVAL1_REG,
 	C_CAN_MSGVAL2_REG,
+	C_CAN_FUNCTION_REG,
 };
 
 static const u16 reg_map_c_can[] = {
@@ -129,6 +130,7 @@ static const u16 reg_map_d_can[] = {
 	[C_CAN_BRPEXT_REG]	= 0x0E,
 	[C_CAN_INT_REG]		= 0x10,
 	[C_CAN_TEST_REG]	= 0x14,
+	[C_CAN_FUNCTION_REG]	= 0x18,
 	[C_CAN_TXRQST1_REG]	= 0x88,
 	[C_CAN_TXRQST2_REG]	= 0x8A,
 	[C_CAN_NEWDAT1_REG]	= 0x9C,
@@ -176,8 +178,10 @@ struct c_can_priv {
 	atomic_t tx_active;
 	unsigned long tx_dir;
 	int last_status;
-	u16 (*read_reg) (struct c_can_priv *priv, enum reg index);
-	void (*write_reg) (struct c_can_priv *priv, enum reg index, u16 val);
+	u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
+	void (*write_reg) (const struct c_can_priv *priv, enum reg index, u16 val);
+	u32 (*read_reg32) (const struct c_can_priv *priv, enum reg index);
+	void (*write_reg32) (const struct c_can_priv *priv, enum reg index, u32 val);
 	void __iomem *base;
 	const u16 *regs;
 	void *priv;		/* for board-specific data */
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
index fe5f6303b584..5d11e0e4225b 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -19,9 +19,13 @@
 
 #include "c_can.h"
 
+#define PCI_DEVICE_ID_PCH_CAN	0x8818
+#define PCH_PCI_SOFT_RESET	0x01fc
+
 enum c_can_pci_reg_align {
 	C_CAN_REG_ALIGN_16,
 	C_CAN_REG_ALIGN_32,
+	C_CAN_REG_32,
 };
 
 struct c_can_pci_data {
@@ -31,6 +35,10 @@ struct c_can_pci_data {
 	enum c_can_pci_reg_align reg_align;
 	/* Set the frequency */
 	unsigned int freq;
+	/* PCI bar number */
+	int bar;
+	/* Callback for reset */
+	void (*init)(const struct c_can_priv *priv, bool enable);
 };
 
 /*
@@ -39,30 +47,70 @@ struct c_can_pci_data {
  * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
  * Handle the same by providing a common read/write interface.
  */
-static u16 c_can_pci_read_reg_aligned_to_16bit(struct c_can_priv *priv,
+static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
 						enum reg index)
 {
 	return readw(priv->base + priv->regs[index]);
 }
 
-static void c_can_pci_write_reg_aligned_to_16bit(struct c_can_priv *priv,
+static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
 						enum reg index, u16 val)
 {
 	writew(val, priv->base + priv->regs[index]);
 }
 
-static u16 c_can_pci_read_reg_aligned_to_32bit(struct c_can_priv *priv,
+static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
 						enum reg index)
 {
 	return readw(priv->base + 2 * priv->regs[index]);
 }
 
-static void c_can_pci_write_reg_aligned_to_32bit(struct c_can_priv *priv,
+static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
 						enum reg index, u16 val)
 {
 	writew(val, priv->base + 2 * priv->regs[index]);
 }
 
+static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
+				    enum reg index)
+{
+	return (u16)ioread32(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
+				      enum reg index, u16 val)
+{
+	iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
+}
+
+static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
+		u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
+{
+	if (enable) {
+		u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
+
+		/* write to sw reset register */
+		iowrite32(1, addr);
+		iowrite32(0, addr);
+	}
+}
+
 static int c_can_pci_probe(struct pci_dev *pdev,
 			   const struct pci_device_id *ent)
 {
@@ -90,7 +138,8 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 		pci_set_master(pdev);
 	}
 
-	addr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+	addr = pci_iomap(pdev, c_can_pci_data->bar,
+			 pci_resource_len(pdev, c_can_pci_data->bar));
 	if (!addr) {
 		dev_err(&pdev->dev,
 			"device has no PCI memory resources, "
@@ -147,10 +196,18 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 		priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
 		priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
 		break;
+	case C_CAN_REG_32:
+		priv->read_reg = c_can_pci_read_reg_32bit;
+		priv->write_reg = c_can_pci_write_reg_32bit;
+		break;
 	default:
 		ret = -EINVAL;
 		goto out_free_c_can;
 	}
+	priv->read_reg32 = c_can_pci_read_reg32;
+	priv->write_reg32 = c_can_pci_write_reg32;
+
+	priv->raminit = c_can_pci_data->init;
 
 	ret = register_c_can_dev(dev);
 	if (ret) {
@@ -198,6 +255,15 @@ static struct c_can_pci_data c_can_sta2x11= {
 	.type = BOSCH_C_CAN,
 	.reg_align = C_CAN_REG_ALIGN_32,
 	.freq = 52000000, /* 52 Mhz */
+	.bar = 0,
+};
+
+static struct c_can_pci_data c_can_pch = {
+	.type = BOSCH_C_CAN,
+	.reg_align = C_CAN_REG_32,
+	.freq = 50000000, /* 50 MHz */
+	.init = c_can_pci_reset_pch,
+	.bar = 1,
 };
 
 #define C_CAN_ID(_vend, _dev, _driverdata) {		\
@@ -207,6 +273,8 @@ static struct c_can_pci_data c_can_sta2x11= {
 static DEFINE_PCI_DEVICE_TABLE(c_can_pci_tbl) = {
 	C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
 		 c_can_sta2x11),
+	C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
+		 c_can_pch),
 	{},
 };
 static struct pci_driver c_can_pci_driver = {
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 1df0b322d1e4..824108cd9fd5 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -40,6 +40,7 @@
 #define CAN_RAMINIT_START_MASK(i)	(0x001 << (i))
 #define CAN_RAMINIT_DONE_MASK(i)	(0x100 << (i))
 #define CAN_RAMINIT_ALL_MASK(i)		(0x101 << (i))
+#define DCAN_RAM_INIT_BIT		(1 << 3)
 static DEFINE_SPINLOCK(raminit_lock);
 /*
  * 16-bit c_can registers can be arranged differently in the memory
@@ -47,31 +48,31 @@ static DEFINE_SPINLOCK(raminit_lock);
  * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
  * Handle the same by providing a common read/write interface.
  */
-static u16 c_can_plat_read_reg_aligned_to_16bit(struct c_can_priv *priv,
+static u16 c_can_plat_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
 						enum reg index)
 {
 	return readw(priv->base + priv->regs[index]);
 }
 
-static void c_can_plat_write_reg_aligned_to_16bit(struct c_can_priv *priv,
+static void c_can_plat_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
 						enum reg index, u16 val)
 {
 	writew(val, priv->base + priv->regs[index]);
 }
 
-static u16 c_can_plat_read_reg_aligned_to_32bit(struct c_can_priv *priv,
+static u16 c_can_plat_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
 						enum reg index)
 {
 	return readw(priv->base + 2 * priv->regs[index]);
 }
 
-static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
+static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
 						enum reg index, u16 val)
 {
 	writew(val, priv->base + 2 * priv->regs[index]);
 }
 
-static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask,
+static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
 				  u32 val)
 {
 	/* We look only at the bits of our instance. */
@@ -80,7 +81,7 @@ static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask,
 		udelay(1);
 }
 
-static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
 {
 	u32 mask = CAN_RAMINIT_ALL_MASK(priv->instance);
 	u32 ctrl;
@@ -96,18 +97,68 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
 	ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
 	writel(ctrl, priv->raminit_ctrlreg);
 	ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
-	c_can_hw_raminit_wait(priv, ctrl, mask);
+	c_can_hw_raminit_wait_ti(priv, ctrl, mask);
 
 	if (enable) {
 		/* Set start bit and wait for the done bit. */
 		ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
 		writel(ctrl, priv->raminit_ctrlreg);
 		ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
-		c_can_hw_raminit_wait(priv, ctrl, mask);
+		c_can_hw_raminit_wait_ti(priv, ctrl, mask);
 	}
 	spin_unlock(&raminit_lock);
 }
 
+static u32 c_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_plat_write_reg32(const struct c_can_priv *priv, enum reg index,
+		u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static u32 d_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	return readl(priv->base + priv->regs[index]);
+}
+
+static void d_can_plat_write_reg32(const struct c_can_priv *priv, enum reg index,
+		u32 val)
+{
+	writel(val, priv->base + priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask)
+{
+	while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask)
+		udelay(1);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+	u32 ctrl;
+
+	ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG);
+	ctrl &= ~DCAN_RAM_INIT_BIT;
+	priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+	c_can_hw_raminit_wait(priv, ctrl);
+
+	if (enable) {
+		ctrl |= DCAN_RAM_INIT_BIT;
+		priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+		c_can_hw_raminit_wait(priv, ctrl);
+	}
+}
+
 static struct platform_device_id c_can_id_table[] = {
 	[BOSCH_C_CAN_PLATFORM] = {
 		.name = KBUILD_MODNAME,
@@ -201,11 +252,15 @@ static int c_can_plat_probe(struct platform_device *pdev)
 		case IORESOURCE_MEM_32BIT:
 			priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
 			priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
 			break;
 		case IORESOURCE_MEM_16BIT:
 		default:
 			priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
 			priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
 			break;
 		}
 		break;
@@ -214,6 +269,8 @@ static int c_can_plat_probe(struct platform_device *pdev)
 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
 		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+		priv->read_reg32 = d_can_plat_read_reg32;
+		priv->write_reg32 = d_can_plat_write_reg32;
 
 		if (pdev->dev.of_node)
 			priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
@@ -221,11 +278,20 @@ static int c_can_plat_probe(struct platform_device *pdev)
 			priv->instance = pdev->id;
 
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		/* Not all D_CAN modules have a separate register for the D_CAN
+		 * RAM initialization. Use default RAM init bit in D_CAN module
+		 * if not specified in DT.
+		 */
+		if (!res) {
+			priv->raminit = c_can_hw_raminit;
+			break;
+		}
+
 		priv->raminit_ctrlreg = devm_ioremap_resource(&pdev->dev, res);
 		if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0)
 			dev_info(&pdev->dev, "control memory is not used for raminit\n");
 		else
-			priv->raminit = c_can_hw_raminit;
+			priv->raminit = c_can_hw_raminit_ti;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index f19be5269e7b..81c711719490 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -1,5 +1,5 @@
 config CAN_MSCAN
-	depends on PPC || M68K
+	depends on PPC
 	tristate "Support for Freescale MSCAN based chips"
 	---help---
 	  The Motorola Scalable Controller Area Network (MSCAN) definition
diff --git a/drivers/net/can/rcar_can.c b/drivers/net/can/rcar_can.c
new file mode 100644
index 000000000000..5268d216ecfa
--- /dev/null
+++ b/drivers/net/can/rcar_can.c
@@ -0,0 +1,876 @@
+/* Renesas R-Car CAN device driver
+ *
+ * Copyright (C) 2013 Cogent Embedded, Inc. <source@cogentembedded.com>
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/can/led.h>
+#include <linux/can/dev.h>
+#include <linux/clk.h>
+#include <linux/can/platform/rcar_can.h>
+
+#define RCAR_CAN_DRV_NAME	"rcar_can"
+
+/* Mailbox configuration:
+ * mailbox 60 - 63 - Rx FIFO mailboxes
+ * mailbox 56 - 59 - Tx FIFO mailboxes
+ * non-FIFO mailboxes are not used
+ */
+#define RCAR_CAN_N_MBX		64 /* Number of mailboxes in non-FIFO mode */
+#define RCAR_CAN_RX_FIFO_MBX	60 /* Mailbox - window to Rx FIFO */
+#define RCAR_CAN_TX_FIFO_MBX	56 /* Mailbox - window to Tx FIFO */
+#define RCAR_CAN_FIFO_DEPTH	4
+
+/* Mailbox registers structure */
+struct rcar_can_mbox_regs {
+	u32 id;		/* IDE and RTR bits, SID and EID */
+	u8 stub;	/* Not used */
+	u8 dlc;		/* Data Length Code - bits [0..3] */
+	u8 data[8];	/* Data Bytes */
+	u8 tsh;		/* Time Stamp Higher Byte */
+	u8 tsl;		/* Time Stamp Lower Byte */
+};
+
+struct rcar_can_regs {
+	struct rcar_can_mbox_regs mb[RCAR_CAN_N_MBX]; /* Mailbox registers */
+	u32 mkr_2_9[8];	/* Mask Registers 2-9 */
+	u32 fidcr[2];	/* FIFO Received ID Compare Register */
+	u32 mkivlr1;	/* Mask Invalid Register 1 */
+	u32 mier1;	/* Mailbox Interrupt Enable Register 1 */
+	u32 mkr_0_1[2];	/* Mask Registers 0-1 */
+	u32 mkivlr0;    /* Mask Invalid Register 0*/
+	u32 mier0;      /* Mailbox Interrupt Enable Register 0 */
+	u8 pad_440[0x3c0];
+	u8 mctl[64];	/* Message Control Registers */
+	u16 ctlr;	/* Control Register */
+	u16 str;	/* Status register */
+	u8 bcr[3];	/* Bit Configuration Register */
+	u8 clkr;	/* Clock Select Register */
+	u8 rfcr;	/* Receive FIFO Control Register */
+	u8 rfpcr;	/* Receive FIFO Pointer Control Register */
+	u8 tfcr;	/* Transmit FIFO Control Register */
+	u8 tfpcr;       /* Transmit FIFO Pointer Control Register */
+	u8 eier;	/* Error Interrupt Enable Register */
+	u8 eifr;	/* Error Interrupt Factor Judge Register */
+	u8 recr;	/* Receive Error Count Register */
+	u8 tecr;        /* Transmit Error Count Register */
+	u8 ecsr;	/* Error Code Store Register */
+	u8 cssr;	/* Channel Search Support Register */
+	u8 mssr;	/* Mailbox Search Status Register */
+	u8 msmr;	/* Mailbox Search Mode Register */
+	u16 tsr;	/* Time Stamp Register */
+	u8 afsr;	/* Acceptance Filter Support Register */
+	u8 pad_857;
+	u8 tcr;		/* Test Control Register */
+	u8 pad_859[7];
+	u8 ier;		/* Interrupt Enable Register */
+	u8 isr;		/* Interrupt Status Register */
+	u8 pad_862;
+	u8 mbsmr;	/* Mailbox Search Mask Register */
+};
+
+struct rcar_can_priv {
+	struct can_priv can;	/* Must be the first member! */
+	struct net_device *ndev;
+	struct napi_struct napi;
+	struct rcar_can_regs __iomem *regs;
+	struct clk *clk;
+	u8 tx_dlc[RCAR_CAN_FIFO_DEPTH];
+	u32 tx_head;
+	u32 tx_tail;
+	u8 clock_select;
+	u8 ier;
+};
+
+static const struct can_bittiming_const rcar_can_bittiming_const = {
+	.name = RCAR_CAN_DRV_NAME,
+	.tseg1_min = 4,
+	.tseg1_max = 16,
+	.tseg2_min = 2,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 1024,
+	.brp_inc = 1,
+};
+
+/* Control Register bits */
+#define RCAR_CAN_CTLR_BOM	(3 << 11) /* Bus-Off Recovery Mode Bits */
+#define RCAR_CAN_CTLR_BOM_ENT	(1 << 11) /* Entry to halt mode */
+					/* at bus-off entry */
+#define RCAR_CAN_CTLR_SLPM	(1 << 10)
+#define RCAR_CAN_CTLR_CANM	(3 << 8) /* Operating Mode Select Bit */
+#define RCAR_CAN_CTLR_CANM_HALT	(1 << 9)
+#define RCAR_CAN_CTLR_CANM_RESET (1 << 8)
+#define RCAR_CAN_CTLR_CANM_FORCE_RESET (3 << 8)
+#define RCAR_CAN_CTLR_MLM	(1 << 3) /* Message Lost Mode Select */
+#define RCAR_CAN_CTLR_IDFM	(3 << 1) /* ID Format Mode Select Bits */
+#define RCAR_CAN_CTLR_IDFM_MIXED (1 << 2) /* Mixed ID mode */
+#define RCAR_CAN_CTLR_MBM	(1 << 0) /* Mailbox Mode select */
+
+/* Status Register bits */
+#define RCAR_CAN_STR_RSTST	(1 << 8) /* Reset Status Bit */
+
+/* FIFO Received ID Compare Registers 0 and 1 bits */
+#define RCAR_CAN_FIDCR_IDE	(1 << 31) /* ID Extension Bit */
+#define RCAR_CAN_FIDCR_RTR	(1 << 30) /* Remote Transmission Request Bit */
+
+/* Receive FIFO Control Register bits */
+#define RCAR_CAN_RFCR_RFEST	(1 << 7) /* Receive FIFO Empty Status Flag */
+#define RCAR_CAN_RFCR_RFE	(1 << 0) /* Receive FIFO Enable */
+
+/* Transmit FIFO Control Register bits */
+#define RCAR_CAN_TFCR_TFUST	(7 << 1) /* Transmit FIFO Unsent Message */
+					/* Number Status Bits */
+#define RCAR_CAN_TFCR_TFUST_SHIFT 1	/* Offset of Transmit FIFO Unsent */
+					/* Message Number Status Bits */
+#define RCAR_CAN_TFCR_TFE	(1 << 0) /* Transmit FIFO Enable */
+
+#define RCAR_CAN_N_RX_MKREGS1	2	/* Number of mask registers */
+					/* for Rx mailboxes 0-31 */
+#define RCAR_CAN_N_RX_MKREGS2	8
+
+/* Bit Configuration Register settings */
+#define RCAR_CAN_BCR_TSEG1(x)	(((x) & 0x0f) << 20)
+#define RCAR_CAN_BCR_BPR(x)	(((x) & 0x3ff) << 8)
+#define RCAR_CAN_BCR_SJW(x)	(((x) & 0x3) << 4)
+#define RCAR_CAN_BCR_TSEG2(x)	((x) & 0x07)
+
+/* Mailbox and Mask Registers bits */
+#define RCAR_CAN_IDE		(1 << 31)
+#define RCAR_CAN_RTR		(1 << 30)
+#define RCAR_CAN_SID_SHIFT	18
+
+/* Mailbox Interrupt Enable Register 1 bits */
+#define RCAR_CAN_MIER1_RXFIE	(1 << 28) /* Receive  FIFO Interrupt Enable */
+#define RCAR_CAN_MIER1_TXFIE	(1 << 24) /* Transmit FIFO Interrupt Enable */
+
+/* Interrupt Enable Register bits */
+#define RCAR_CAN_IER_ERSIE	(1 << 5) /* Error (ERS) Interrupt Enable Bit */
+#define RCAR_CAN_IER_RXFIE	(1 << 4) /* Reception FIFO Interrupt */
+					/* Enable Bit */
+#define RCAR_CAN_IER_TXFIE	(1 << 3) /* Transmission FIFO Interrupt */
+					/* Enable Bit */
+/* Interrupt Status Register bits */
+#define RCAR_CAN_ISR_ERSF	(1 << 5) /* Error (ERS) Interrupt Status Bit */
+#define RCAR_CAN_ISR_RXFF	(1 << 4) /* Reception FIFO Interrupt */
+					/* Status Bit */
+#define RCAR_CAN_ISR_TXFF	(1 << 3) /* Transmission FIFO Interrupt */
+					/* Status Bit */
+
+/* Error Interrupt Enable Register bits */
+#define RCAR_CAN_EIER_BLIE	(1 << 7) /* Bus Lock Interrupt Enable */
+#define RCAR_CAN_EIER_OLIE	(1 << 6) /* Overload Frame Transmit */
+					/* Interrupt Enable */
+#define RCAR_CAN_EIER_ORIE	(1 << 5) /* Receive Overrun  Interrupt Enable */
+#define RCAR_CAN_EIER_BORIE	(1 << 4) /* Bus-Off Recovery Interrupt Enable */
+#define RCAR_CAN_EIER_BOEIE	(1 << 3) /* Bus-Off Entry Interrupt Enable */
+#define RCAR_CAN_EIER_EPIE	(1 << 2) /* Error Passive Interrupt Enable */
+#define RCAR_CAN_EIER_EWIE	(1 << 1) /* Error Warning Interrupt Enable */
+#define RCAR_CAN_EIER_BEIE	(1 << 0) /* Bus Error Interrupt Enable */
+
+/* Error Interrupt Factor Judge Register bits */
+#define RCAR_CAN_EIFR_BLIF	(1 << 7) /* Bus Lock Detect Flag */
+#define RCAR_CAN_EIFR_OLIF	(1 << 6) /* Overload Frame Transmission */
+					 /* Detect Flag */
+#define RCAR_CAN_EIFR_ORIF	(1 << 5) /* Receive Overrun Detect Flag */
+#define RCAR_CAN_EIFR_BORIF	(1 << 4) /* Bus-Off Recovery Detect Flag */
+#define RCAR_CAN_EIFR_BOEIF	(1 << 3) /* Bus-Off Entry Detect Flag */
+#define RCAR_CAN_EIFR_EPIF	(1 << 2) /* Error Passive Detect Flag */
+#define RCAR_CAN_EIFR_EWIF	(1 << 1) /* Error Warning Detect Flag */
+#define RCAR_CAN_EIFR_BEIF	(1 << 0) /* Bus Error Detect Flag */
+
+/* Error Code Store Register bits */
+#define RCAR_CAN_ECSR_EDPM	(1 << 7) /* Error Display Mode Select Bit */
+#define RCAR_CAN_ECSR_ADEF	(1 << 6) /* ACK Delimiter Error Flag */
+#define RCAR_CAN_ECSR_BE0F	(1 << 5) /* Bit Error (dominant) Flag */
+#define RCAR_CAN_ECSR_BE1F	(1 << 4) /* Bit Error (recessive) Flag */
+#define RCAR_CAN_ECSR_CEF	(1 << 3) /* CRC Error Flag */
+#define RCAR_CAN_ECSR_AEF	(1 << 2) /* ACK Error Flag */
+#define RCAR_CAN_ECSR_FEF	(1 << 1) /* Form Error Flag */
+#define RCAR_CAN_ECSR_SEF	(1 << 0) /* Stuff Error Flag */
+
+#define RCAR_CAN_NAPI_WEIGHT	4
+#define MAX_STR_READS		0x100
+
+static void tx_failure_cleanup(struct net_device *ndev)
+{
+	int i;
+
+	for (i = 0; i < RCAR_CAN_FIFO_DEPTH; i++)
+		can_free_echo_skb(ndev, i);
+}
+
+static void rcar_can_error(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u8 eifr, txerr = 0, rxerr = 0;
+
+	/* Propagate the error condition to the CAN stack */
+	skb = alloc_can_err_skb(ndev, &cf);
+
+	eifr = readb(&priv->regs->eifr);
+	if (eifr & (RCAR_CAN_EIFR_EWIF | RCAR_CAN_EIFR_EPIF)) {
+		txerr = readb(&priv->regs->tecr);
+		rxerr = readb(&priv->regs->recr);
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[6] = txerr;
+			cf->data[7] = rxerr;
+		}
+	}
+	if (eifr & RCAR_CAN_EIFR_BEIF) {
+		int rx_errors = 0, tx_errors = 0;
+		u8 ecsr;
+
+		netdev_dbg(priv->ndev, "Bus error interrupt:\n");
+		if (skb) {
+			cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+			cf->data[2] = CAN_ERR_PROT_UNSPEC;
+		}
+		ecsr = readb(&priv->regs->ecsr);
+		if (ecsr & RCAR_CAN_ECSR_ADEF) {
+			netdev_dbg(priv->ndev, "ACK Delimiter Error\n");
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_ADEF, &priv->regs->ecsr);
+			if (skb)
+				cf->data[3] |= CAN_ERR_PROT_LOC_ACK_DEL;
+		}
+		if (ecsr & RCAR_CAN_ECSR_BE0F) {
+			netdev_dbg(priv->ndev, "Bit Error (dominant)\n");
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_BE0F, &priv->regs->ecsr);
+			if (skb)
+				cf->data[2] |= CAN_ERR_PROT_BIT0;
+		}
+		if (ecsr & RCAR_CAN_ECSR_BE1F) {
+			netdev_dbg(priv->ndev, "Bit Error (recessive)\n");
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_BE1F, &priv->regs->ecsr);
+			if (skb)
+				cf->data[2] |= CAN_ERR_PROT_BIT1;
+		}
+		if (ecsr & RCAR_CAN_ECSR_CEF) {
+			netdev_dbg(priv->ndev, "CRC Error\n");
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_CEF, &priv->regs->ecsr);
+			if (skb)
+				cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+		}
+		if (ecsr & RCAR_CAN_ECSR_AEF) {
+			netdev_dbg(priv->ndev, "ACK Error\n");
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_AEF, &priv->regs->ecsr);
+			if (skb) {
+				cf->can_id |= CAN_ERR_ACK;
+				cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
+			}
+		}
+		if (ecsr & RCAR_CAN_ECSR_FEF) {
+			netdev_dbg(priv->ndev, "Form Error\n");
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_FEF, &priv->regs->ecsr);
+			if (skb)
+				cf->data[2] |= CAN_ERR_PROT_FORM;
+		}
+		if (ecsr & RCAR_CAN_ECSR_SEF) {
+			netdev_dbg(priv->ndev, "Stuff Error\n");
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_SEF, &priv->regs->ecsr);
+			if (skb)
+				cf->data[2] |= CAN_ERR_PROT_STUFF;
+		}
+
+		priv->can.can_stats.bus_error++;
+		ndev->stats.rx_errors += rx_errors;
+		ndev->stats.tx_errors += tx_errors;
+		writeb(~RCAR_CAN_EIFR_BEIF, &priv->regs->eifr);
+	}
+	if (eifr & RCAR_CAN_EIFR_EWIF) {
+		netdev_dbg(priv->ndev, "Error warning interrupt\n");
+		priv->can.state = CAN_STATE_ERROR_WARNING;
+		priv->can.can_stats.error_warning++;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_EWIF, &priv->regs->eifr);
+		if (skb)
+			cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_WARNING :
+					      CAN_ERR_CRTL_RX_WARNING;
+	}
+	if (eifr & RCAR_CAN_EIFR_EPIF) {
+		netdev_dbg(priv->ndev, "Error passive interrupt\n");
+		priv->can.state = CAN_STATE_ERROR_PASSIVE;
+		priv->can.can_stats.error_passive++;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_EPIF, &priv->regs->eifr);
+		if (skb)
+			cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_PASSIVE :
+					      CAN_ERR_CRTL_RX_PASSIVE;
+	}
+	if (eifr & RCAR_CAN_EIFR_BOEIF) {
+		netdev_dbg(priv->ndev, "Bus-off entry interrupt\n");
+		tx_failure_cleanup(ndev);
+		priv->ier = RCAR_CAN_IER_ERSIE;
+		writeb(priv->ier, &priv->regs->ier);
+		priv->can.state = CAN_STATE_BUS_OFF;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_BOEIF, &priv->regs->eifr);
+		can_bus_off(ndev);
+		if (skb)
+			cf->can_id |= CAN_ERR_BUSOFF;
+	}
+	if (eifr & RCAR_CAN_EIFR_ORIF) {
+		netdev_dbg(priv->ndev, "Receive overrun error interrupt\n");
+		ndev->stats.rx_over_errors++;
+		ndev->stats.rx_errors++;
+		writeb(~RCAR_CAN_EIFR_ORIF, &priv->regs->eifr);
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		}
+	}
+	if (eifr & RCAR_CAN_EIFR_OLIF) {
+		netdev_dbg(priv->ndev,
+			   "Overload Frame Transmission error interrupt\n");
+		ndev->stats.rx_over_errors++;
+		ndev->stats.rx_errors++;
+		writeb(~RCAR_CAN_EIFR_OLIF, &priv->regs->eifr);
+		if (skb) {
+			cf->can_id |= CAN_ERR_PROT;
+			cf->data[2] |= CAN_ERR_PROT_OVERLOAD;
+		}
+	}
+
+	if (skb) {
+		stats->rx_packets++;
+		stats->rx_bytes += cf->can_dlc;
+		netif_rx(skb);
+	}
+}
+
+static void rcar_can_tx_done(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	u8 isr;
+
+	while (1) {
+		u8 unsent = readb(&priv->regs->tfcr);
+
+		unsent = (unsent & RCAR_CAN_TFCR_TFUST) >>
+			  RCAR_CAN_TFCR_TFUST_SHIFT;
+		if (priv->tx_head - priv->tx_tail <= unsent)
+			break;
+		stats->tx_packets++;
+		stats->tx_bytes += priv->tx_dlc[priv->tx_tail %
+						RCAR_CAN_FIFO_DEPTH];
+		priv->tx_dlc[priv->tx_tail % RCAR_CAN_FIFO_DEPTH] = 0;
+		can_get_echo_skb(ndev, priv->tx_tail % RCAR_CAN_FIFO_DEPTH);
+		priv->tx_tail++;
+		netif_wake_queue(ndev);
+	}
+	/* Clear interrupt */
+	isr = readb(&priv->regs->isr);
+	writeb(isr & ~RCAR_CAN_ISR_TXFF, &priv->regs->isr);
+	can_led_event(ndev, CAN_LED_EVENT_TX);
+}
+
+static irqreturn_t rcar_can_interrupt(int irq, void *dev_id)
+{
+	struct net_device *ndev = dev_id;
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u8 isr;
+
+	isr = readb(&priv->regs->isr);
+	if (!(isr & priv->ier))
+		return IRQ_NONE;
+
+	if (isr & RCAR_CAN_ISR_ERSF)
+		rcar_can_error(ndev);
+
+	if (isr & RCAR_CAN_ISR_TXFF)
+		rcar_can_tx_done(ndev);
+
+	if (isr & RCAR_CAN_ISR_RXFF) {
+		if (napi_schedule_prep(&priv->napi)) {
+			/* Disable Rx FIFO interrupts */
+			priv->ier &= ~RCAR_CAN_IER_RXFIE;
+			writeb(priv->ier, &priv->regs->ier);
+			__napi_schedule(&priv->napi);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void rcar_can_set_bittiming(struct net_device *dev)
+{
+	struct rcar_can_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u32 bcr;
+
+	bcr = RCAR_CAN_BCR_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
+	      RCAR_CAN_BCR_BPR(bt->brp - 1) | RCAR_CAN_BCR_SJW(bt->sjw - 1) |
+	      RCAR_CAN_BCR_TSEG2(bt->phase_seg2 - 1);
+	/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
+	 * All the registers are big-endian but they get byte-swapped on 32-bit
+	 * read/write (but not on 8-bit, contrary to the manuals)...
+	 */
+	writel((bcr << 8) | priv->clock_select, &priv->regs->bcr);
+}
+
+static void rcar_can_start(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int i;
+
+	/* Set controller to known mode:
+	 * - FIFO mailbox mode
+	 * - accept all messages
+	 * - overrun mode
+	 * CAN is in sleep mode after MCU hardware or software reset.
+	 */
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	/* Go to reset mode */
+	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	writew(ctlr, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
+			break;
+	}
+	rcar_can_set_bittiming(ndev);
+	ctlr |= RCAR_CAN_CTLR_IDFM_MIXED; /* Select mixed ID mode */
+	ctlr |= RCAR_CAN_CTLR_BOM_ENT;	/* Entry to halt mode automatically */
+					/* at bus-off */
+	ctlr |= RCAR_CAN_CTLR_MBM;	/* Select FIFO mailbox mode */
+	ctlr |= RCAR_CAN_CTLR_MLM;	/* Overrun mode */
+	writew(ctlr, &priv->regs->ctlr);
+
+	/* Accept all SID and EID */
+	writel(0, &priv->regs->mkr_2_9[6]);
+	writel(0, &priv->regs->mkr_2_9[7]);
+	/* In FIFO mailbox mode, write "0" to bits 24 to 31 */
+	writel(0, &priv->regs->mkivlr1);
+	/* Accept all frames */
+	writel(0, &priv->regs->fidcr[0]);
+	writel(RCAR_CAN_FIDCR_IDE | RCAR_CAN_FIDCR_RTR, &priv->regs->fidcr[1]);
+	/* Enable and configure FIFO mailbox interrupts */
+	writel(RCAR_CAN_MIER1_RXFIE | RCAR_CAN_MIER1_TXFIE, &priv->regs->mier1);
+
+	priv->ier = RCAR_CAN_IER_ERSIE | RCAR_CAN_IER_RXFIE |
+		    RCAR_CAN_IER_TXFIE;
+	writeb(priv->ier, &priv->regs->ier);
+
+	/* Accumulate error codes */
+	writeb(RCAR_CAN_ECSR_EDPM, &priv->regs->ecsr);
+	/* Enable error interrupts */
+	writeb(RCAR_CAN_EIER_EWIE | RCAR_CAN_EIER_EPIE | RCAR_CAN_EIER_BOEIE |
+	       (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING ?
+	       RCAR_CAN_EIER_BEIE : 0) | RCAR_CAN_EIER_ORIE |
+	       RCAR_CAN_EIER_OLIE, &priv->regs->eier);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	/* Go to operation mode */
+	writew(ctlr & ~RCAR_CAN_CTLR_CANM, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (!(readw(&priv->regs->str) & RCAR_CAN_STR_RSTST))
+			break;
+	}
+	/* Enable Rx and Tx FIFO */
+	writeb(RCAR_CAN_RFCR_RFE, &priv->regs->rfcr);
+	writeb(RCAR_CAN_TFCR_TFE, &priv->regs->tfcr);
+}
+
+static int rcar_can_open(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		netdev_err(ndev, "clk_prepare_enable() failed, error %d\n",
+			   err);
+		goto out;
+	}
+	err = open_candev(ndev);
+	if (err) {
+		netdev_err(ndev, "open_candev() failed, error %d\n", err);
+		goto out_clock;
+	}
+	napi_enable(&priv->napi);
+	err = request_irq(ndev->irq, rcar_can_interrupt, 0, ndev->name, ndev);
+	if (err) {
+		netdev_err(ndev, "error requesting interrupt %x\n", ndev->irq);
+		goto out_close;
+	}
+	can_led_event(ndev, CAN_LED_EVENT_OPEN);
+	rcar_can_start(ndev);
+	netif_start_queue(ndev);
+	return 0;
+out_close:
+	napi_disable(&priv->napi);
+	close_candev(ndev);
+out_clock:
+	clk_disable_unprepare(priv->clk);
+out:
+	return err;
+}
+
+static void rcar_can_stop(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int i;
+
+	/* Go to (force) reset mode */
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	writew(ctlr, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
+			break;
+	}
+	writel(0, &priv->regs->mier0);
+	writel(0, &priv->regs->mier1);
+	writeb(0, &priv->regs->ier);
+	writeb(0, &priv->regs->eier);
+	/* Go to sleep mode */
+	ctlr |= RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int rcar_can_close(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	rcar_can_stop(ndev);
+	free_irq(ndev->irq, ndev);
+	napi_disable(&priv->napi);
+	clk_disable_unprepare(priv->clk);
+	close_candev(ndev);
+	can_led_event(ndev, CAN_LED_EVENT_STOP);
+	return 0;
+}
+
+static netdev_tx_t rcar_can_start_xmit(struct sk_buff *skb,
+				       struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	u32 data, i;
+
+	if (can_dropped_invalid_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
+	if (cf->can_id & CAN_EFF_FLAG)	/* Extended frame format */
+		data = (cf->can_id & CAN_EFF_MASK) | RCAR_CAN_IDE;
+	else				/* Standard frame format */
+		data = (cf->can_id & CAN_SFF_MASK) << RCAR_CAN_SID_SHIFT;
+
+	if (cf->can_id & CAN_RTR_FLAG) { /* Remote transmission request */
+		data |= RCAR_CAN_RTR;
+	} else {
+		for (i = 0; i < cf->can_dlc; i++)
+			writeb(cf->data[i],
+			       &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].data[i]);
+	}
+
+	writel(data, &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].id);
+
+	writeb(cf->can_dlc, &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].dlc);
+
+	priv->tx_dlc[priv->tx_head % RCAR_CAN_FIFO_DEPTH] = cf->can_dlc;
+	can_put_echo_skb(skb, ndev, priv->tx_head % RCAR_CAN_FIFO_DEPTH);
+	priv->tx_head++;
+	/* Start Tx: write 0xff to the TFPCR register to increment
+	 * the CPU-side pointer for the transmit FIFO to the next
+	 * mailbox location
+	 */
+	writeb(0xff, &priv->regs->tfpcr);
+	/* Stop the queue if we've filled all FIFO entries */
+	if (priv->tx_head - priv->tx_tail >= RCAR_CAN_FIFO_DEPTH)
+		netif_stop_queue(ndev);
+
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops rcar_can_netdev_ops = {
+	.ndo_open = rcar_can_open,
+	.ndo_stop = rcar_can_close,
+	.ndo_start_xmit = rcar_can_start_xmit,
+};
+
+static void rcar_can_rx_pkt(struct rcar_can_priv *priv)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 data;
+	u8 dlc;
+
+	skb = alloc_can_skb(priv->ndev, &cf);
+	if (!skb) {
+		stats->rx_dropped++;
+		return;
+	}
+
+	data = readl(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].id);
+	if (data & RCAR_CAN_IDE)
+		cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+	else
+		cf->can_id = (data >> RCAR_CAN_SID_SHIFT) & CAN_SFF_MASK;
+
+	dlc = readb(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].dlc);
+	cf->can_dlc = get_can_dlc(dlc);
+	if (data & RCAR_CAN_RTR) {
+		cf->can_id |= CAN_RTR_FLAG;
+	} else {
+		for (dlc = 0; dlc < cf->can_dlc; dlc++)
+			cf->data[dlc] =
+			readb(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].data[dlc]);
+	}
+
+	can_led_event(priv->ndev, CAN_LED_EVENT_RX);
+
+	stats->rx_bytes += cf->can_dlc;
+	stats->rx_packets++;
+	netif_receive_skb(skb);
+}
+
+static int rcar_can_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct rcar_can_priv *priv = container_of(napi,
+						  struct rcar_can_priv, napi);
+	int num_pkts;
+
+	for (num_pkts = 0; num_pkts < quota; num_pkts++) {
+		u8 rfcr, isr;
+
+		isr = readb(&priv->regs->isr);
+		/* Clear interrupt bit */
+		if (isr & RCAR_CAN_ISR_RXFF)
+			writeb(isr & ~RCAR_CAN_ISR_RXFF, &priv->regs->isr);
+		rfcr = readb(&priv->regs->rfcr);
+		if (rfcr & RCAR_CAN_RFCR_RFEST)
+			break;
+		rcar_can_rx_pkt(priv);
+		/* Write 0xff to the RFPCR register to increment
+		 * the CPU-side pointer for the receive FIFO
+		 * to the next mailbox location
+		 */
+		writeb(0xff, &priv->regs->rfpcr);
+	}
+	/* All packets processed */
+	if (num_pkts < quota) {
+		napi_complete(napi);
+		priv->ier |= RCAR_CAN_IER_RXFIE;
+		writeb(priv->ier, &priv->regs->ier);
+	}
+	return num_pkts;
+}
+
+static int rcar_can_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	switch (mode) {
+	case CAN_MODE_START:
+		rcar_can_start(ndev);
+		netif_wake_queue(ndev);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int rcar_can_get_berr_counter(const struct net_device *dev,
+				     struct can_berr_counter *bec)
+{
+	struct rcar_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+	bec->txerr = readb(&priv->regs->tecr);
+	bec->rxerr = readb(&priv->regs->recr);
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+static int rcar_can_probe(struct platform_device *pdev)
+{
+	struct rcar_can_platform_data *pdata;
+	struct rcar_can_priv *priv;
+	struct net_device *ndev;
+	struct resource *mem;
+	void __iomem *addr;
+	int err = -ENODEV;
+	int irq;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data provided!\n");
+		goto fail;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		goto fail;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(addr)) {
+		err = PTR_ERR(addr);
+		goto fail;
+	}
+
+	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
+	if (!ndev) {
+		dev_err(&pdev->dev, "alloc_candev() failed\n");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	priv = netdev_priv(ndev);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		err = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "cannot get clock: %d\n", err);
+		goto fail_clk;
+	}
+
+	ndev->netdev_ops = &rcar_can_netdev_ops;
+	ndev->irq = irq;
+	ndev->flags |= IFF_ECHO;
+	priv->ndev = ndev;
+	priv->regs = addr;
+	priv->clock_select = pdata->clock_select;
+	priv->can.clock.freq = clk_get_rate(priv->clk);
+	priv->can.bittiming_const = &rcar_can_bittiming_const;
+	priv->can.do_set_mode = rcar_can_do_set_mode;
+	priv->can.do_get_berr_counter = rcar_can_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	netif_napi_add(ndev, &priv->napi, rcar_can_rx_poll,
+		       RCAR_CAN_NAPI_WEIGHT);
+	err = register_candev(ndev);
+	if (err) {
+		dev_err(&pdev->dev, "register_candev() failed, error %d\n",
+			err);
+		goto fail_candev;
+	}
+
+	devm_can_led_init(ndev);
+
+	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n",
+		 priv->regs, ndev->irq);
+
+	return 0;
+fail_candev:
+	netif_napi_del(&priv->napi);
+fail_clk:
+	free_candev(ndev);
+fail:
+	return err;
+}
+
+static int rcar_can_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+
+	unregister_candev(ndev);
+	netif_napi_del(&priv->napi);
+	free_candev(ndev);
+	return 0;
+}
+
+static int __maybe_unused rcar_can_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_CANM_HALT;
+	writew(ctlr, &priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	clk_disable(priv->clk);
+	return 0;
+}
+
+static int __maybe_unused rcar_can_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int err;
+
+	err = clk_enable(priv->clk);
+	if (err) {
+		netdev_err(ndev, "clk_enable() failed, error %d\n", err);
+		return err;
+	}
+
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_CANM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rcar_can_pm_ops, rcar_can_suspend, rcar_can_resume);
+
+static struct platform_driver rcar_can_driver = {
+	.driver = {
+		.name = RCAR_CAN_DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &rcar_can_pm_ops,
+	},
+	.probe = rcar_can_probe,
+	.remove = rcar_can_remove,
+};
+
+module_platform_driver(rcar_can_driver);
+
+MODULE_AUTHOR("Cogent Embedded, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CAN driver for Renesas R-Car SoC");
+MODULE_ALIAS("platform:" RCAR_CAN_DRV_NAME);
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 7d8c8f3672dd..bacd236ce306 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -556,15 +556,6 @@ failed:
 /*
  * netdev sysfs
  */
-static ssize_t show_channel(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct net_device *ndev = to_net_dev(dev);
-	struct softing_priv *priv = netdev2softing(ndev);
-
-	return sprintf(buf, "%i\n", priv->index);
-}
-
 static ssize_t show_chip(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
@@ -609,12 +600,10 @@ static ssize_t store_output(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static const DEVICE_ATTR(channel, S_IRUGO, show_channel, NULL);
 static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL);
 static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output);
 
 static const struct attribute *const netdev_sysfs_attrs[] = {
-	&dev_attr_channel.attr,
 	&dev_attr_chip.attr,
 	&dev_attr_output.attr,
 	NULL,
@@ -679,17 +668,20 @@ static int softing_netdev_register(struct net_device *netdev)
 {
 	int ret;
 
-	netdev->sysfs_groups[0] = &netdev_sysfs_group;
 	ret = register_candev(netdev);
 	if (ret) {
 		dev_alert(&netdev->dev, "register failed\n");
 		return ret;
 	}
+	if (sysfs_create_group(&netdev->dev.kobj, &netdev_sysfs_group) < 0)
+		netdev_alert(netdev, "sysfs group failed\n");
+
 	return 0;
 }
 
 static void softing_netdev_cleanup(struct net_device *netdev)
 {
+	sysfs_remove_group(&netdev->dev.kobj, &netdev_sysfs_group);
 	unregister_candev(netdev);
 	free_candev(netdev);
 }
@@ -721,8 +713,6 @@ DEV_ATTR_RO(firmware_version, id.fw_version);
 DEV_ATTR_RO_STR(hardware, pdat->name);
 DEV_ATTR_RO(hardware_version, id.hw_version);
 DEV_ATTR_RO(license, id.license);
-DEV_ATTR_RO(frequency, id.freq);
-DEV_ATTR_RO(txpending, tx.pending);
 
 static struct attribute *softing_pdev_attrs[] = {
 	&dev_attr_serial.attr,
@@ -731,8 +721,6 @@ static struct attribute *softing_pdev_attrs[] = {
 	&dev_attr_hardware.attr,
 	&dev_attr_hardware_version.attr,
 	&dev_attr_license.attr,
-	&dev_attr_frequency.attr,
-	&dev_attr_txpending.attr,
 	NULL,
 };
 
diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
new file mode 100644
index 000000000000..148cae5871a6
--- /dev/null
+++ b/drivers/net/can/spi/Kconfig
@@ -0,0 +1,10 @@
+menu "CAN SPI interfaces"
+	depends on SPI
+
+config CAN_MCP251X
+	tristate "Microchip MCP251x SPI CAN controllers"
+	depends on HAS_DMA
+	---help---
+	  Driver for the Microchip MCP251x SPI CAN controllers.
+
+endmenu
diff --git a/drivers/net/can/spi/Makefile b/drivers/net/can/spi/Makefile
new file mode 100644
index 000000000000..90bcacffbc65
--- /dev/null
+++ b/drivers/net/can/spi/Makefile
@@ -0,0 +1,8 @@
+#
+#  Makefile for the Linux Controller Area Network SPI drivers.
+#
+
+
+obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 28c11f815245..5df239e68812 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -214,6 +214,8 @@
 
 #define TX_ECHO_SKB_MAX	1
 
+#define MCP251X_OST_DELAY_MS	(5)
+
 #define DEVICE_NAME "mcp251x"
 
 static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
@@ -624,50 +626,45 @@ static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv,
 static int mcp251x_hw_reset(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
+	u8 reg;
 	int ret;
-	unsigned long timeout;
+
+	/* Wait for oscillator startup timer after power up */
+	mdelay(MCP251X_OST_DELAY_MS);
 
 	priv->spi_tx_buf[0] = INSTRUCTION_RESET;
-	ret = spi_write(spi, priv->spi_tx_buf, 1);
-	if (ret) {
-		dev_err(&spi->dev, "reset failed: ret = %d\n", ret);
-		return -EIO;
-	}
+	ret = mcp251x_spi_trans(spi, 1);
+	if (ret)
+		return ret;
+
+	/* Wait for oscillator startup timer after reset */
+	mdelay(MCP251X_OST_DELAY_MS);
+	
+	reg = mcp251x_read_reg(spi, CANSTAT);
+	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
+		return -ENODEV;
 
-	/* Wait for reset to finish */
-	timeout = jiffies + HZ;
-	mdelay(10);
-	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK)
-	       != CANCTRL_REQOP_CONF) {
-		schedule();
-		if (time_after(jiffies, timeout)) {
-			dev_err(&spi->dev, "MCP251x didn't"
-				" enter in conf mode after reset\n");
-			return -EBUSY;
-		}
-	}
 	return 0;
 }
 
 static int mcp251x_hw_probe(struct spi_device *spi)
 {
-	int st1, st2;
+	u8 ctrl;
+	int ret;
 
-	mcp251x_hw_reset(spi);
+	ret = mcp251x_hw_reset(spi);
+	if (ret)
+		return ret;
 
-	/*
-	 * Please note that these are "magic values" based on after
-	 * reset defaults taken from data sheet which allows us to see
-	 * if we really have a chip on the bus (we avoid common all
-	 * zeroes or all ones situations)
-	 */
-	st1 = mcp251x_read_reg(spi, CANSTAT) & 0xEE;
-	st2 = mcp251x_read_reg(spi, CANCTRL) & 0x17;
+	ctrl = mcp251x_read_reg(spi, CANCTRL);
+
+	dev_dbg(&spi->dev, "CANCTRL 0x%02x\n", ctrl);
 
-	dev_dbg(&spi->dev, "CANSTAT 0x%02x CANCTRL 0x%02x\n", st1, st2);
+	/* Check for power up default value */
+	if ((ctrl & 0x17) != 0x07)
+		return -ENODEV;
 
-	/* Check for power up default values */
-	return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
+	return 0;
 }
 
 static int mcp251x_power_enable(struct regulator *reg, int enable)
@@ -776,7 +773,6 @@ static void mcp251x_restart_work_handler(struct work_struct *ws)
 
 	mutex_lock(&priv->mcp_lock);
 	if (priv->after_suspend) {
-		mdelay(10);
 		mcp251x_hw_reset(spi);
 		mcp251x_setup(net, priv, spi);
 		if (priv->after_suspend & AFTER_SUSPEND_RESTART) {
@@ -955,7 +951,7 @@ static int mcp251x_open(struct net_device *net)
 	priv->tx_len = 0;
 
 	ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist,
-				   flags, DEVICE_NAME, priv);
+				   flags | IRQF_ONESHOT, DEVICE_NAME, priv);
 	if (ret) {
 		dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
 		mcp251x_power_enable(priv->transceiver, 0);
@@ -1032,8 +1028,8 @@ static int mcp251x_can_probe(struct spi_device *spi)
 	struct mcp251x_platform_data *pdata = dev_get_platdata(&spi->dev);
 	struct net_device *net;
 	struct mcp251x_priv *priv;
-	int freq, ret = -ENODEV;
 	struct clk *clk;
+	int freq, ret;
 
 	clk = devm_clk_get(&spi->dev, NULL);
 	if (IS_ERR(clk)) {
@@ -1076,6 +1072,18 @@ static int mcp251x_can_probe(struct spi_device *spi)
 	priv->net = net;
 	priv->clk = clk;
 
+	spi_set_drvdata(spi, priv);
+
+	/* Configure the SPI bus */
+	spi->bits_per_word = 8;
+	if (mcp251x_is_2510(spi))
+		spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000;
+	else
+		spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000;
+	ret = spi_setup(spi);
+	if (ret)
+		goto out_clk;
+
 	priv->power = devm_regulator_get(&spi->dev, "vdd");
 	priv->transceiver = devm_regulator_get(&spi->dev, "xceiver");
 	if ((PTR_ERR(priv->power) == -EPROBE_DEFER) ||
@@ -1088,8 +1096,6 @@ static int mcp251x_can_probe(struct spi_device *spi)
 	if (ret)
 		goto out_clk;
 
-	spi_set_drvdata(spi, priv);
-
 	priv->spi = spi;
 	mutex_init(&priv->mcp_lock);
 
@@ -1134,20 +1140,11 @@ static int mcp251x_can_probe(struct spi_device *spi)
 
 	SET_NETDEV_DEV(net, &spi->dev);
 
-	/* Configure the SPI bus */
-	spi->mode = spi->mode ? : SPI_MODE_0;
-	if (mcp251x_is_2510(spi))
-		spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000;
-	else
-		spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000;
-	spi->bits_per_word = 8;
-	spi_setup(spi);
-
 	/* Here is OK to not lock the MCP, no one knows about it yet */
-	if (!mcp251x_hw_probe(spi)) {
-		ret = -ENODEV;
+	ret = mcp251x_hw_probe(spi);
+	if (ret)
 		goto error_probe;
-	}
+
 	mcp251x_hw_sleep(spi);
 
 	ret = register_candev(net);
@@ -1156,7 +1153,7 @@ static int mcp251x_can_probe(struct spi_device *spi)
 
 	devm_can_led_init(net);
 
-	return ret;
+	return 0;
 
 error_probe:
 	if (mcp251x_enable_dma)
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index fc96a3d83ebe..a77db919363c 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -13,13 +13,21 @@ config CAN_ESD_USB2
           This driver supports the CAN-USB/2 interface
           from esd electronic system design gmbh (http://www.esd.eu).
 
+config CAN_GS_USB
+	tristate "Geschwister Schneider UG interfaces"
+	---help---
+	  This driver supports the Geschwister Schneider USB/CAN devices.
+	  If unsure choose N,
+	  choose Y for built in support,
+	  M to compile as module (module will be named: gs_usb).
+
 config CAN_KVASER_USB
 	tristate "Kvaser CAN/USB interface"
 	---help---
 	  This driver adds support for Kvaser CAN/USB devices like Kvaser
 	  Leaf Light.
 
-	  The driver gives support for the following devices:
+	  The driver provides support for the following devices:
 	    - Kvaser Leaf Light
 	    - Kvaser Leaf Professional HS
 	    - Kvaser Leaf SemiPro HS
@@ -36,6 +44,8 @@ config CAN_KVASER_USB
 	    - Kvaser Leaf Light "China"
 	    - Kvaser BlackBird SemiPro
 	    - Kvaser USBcan R
+	    - Kvaser Leaf Light v2
+	    - Kvaser Mini PCI Express HS
 
 	  If unsure, say N.
 
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index becef460a91a..7b9a393b1ac8 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
 obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
+obj-$(CONFIG_CAN_GS_USB) += gs_usb.o
 obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
 obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
 obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
new file mode 100644
index 000000000000..04b0f84612f0
--- /dev/null
+++ b/drivers/net/can/usb/gs_usb.c
@@ -0,0 +1,971 @@
+/* CAN driver for Geschwister Schneider USB/CAN devices.
+ *
+ * Copyright (C) 2013 Geschwister Schneider Technologie-,
+ * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt).
+ *
+ * Many thanks to all socketcan devs!
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+/* Device specific constants */
+#define USB_GSUSB_1_VENDOR_ID      0x1d50
+#define USB_GSUSB_1_PRODUCT_ID     0x606f
+
+#define GSUSB_ENDPOINT_IN          1
+#define GSUSB_ENDPOINT_OUT         2
+
+/* Device specific constants */
+enum gs_usb_breq {
+	GS_USB_BREQ_HOST_FORMAT = 0,
+	GS_USB_BREQ_BITTIMING,
+	GS_USB_BREQ_MODE,
+	GS_USB_BREQ_BERR,
+	GS_USB_BREQ_BT_CONST,
+	GS_USB_BREQ_DEVICE_CONFIG
+};
+
+enum gs_can_mode {
+	/* reset a channel. turns it off */
+	GS_CAN_MODE_RESET = 0,
+	/* starts a channel */
+	GS_CAN_MODE_START
+};
+
+enum gs_can_state {
+	GS_CAN_STATE_ERROR_ACTIVE = 0,
+	GS_CAN_STATE_ERROR_WARNING,
+	GS_CAN_STATE_ERROR_PASSIVE,
+	GS_CAN_STATE_BUS_OFF,
+	GS_CAN_STATE_STOPPED,
+	GS_CAN_STATE_SLEEPING
+};
+
+/* data types passed between host and device */
+struct gs_host_config {
+	u32 byte_order;
+} __packed;
+/* All data exchanged between host and device is exchanged in host byte order,
+ * thanks to the struct gs_host_config byte_order member, which is sent first
+ * to indicate the desired byte order.
+ */
+
+struct gs_device_config {
+	u8 reserved1;
+	u8 reserved2;
+	u8 reserved3;
+	u8 icount;
+	u32 sw_version;
+	u32 hw_version;
+} __packed;
+
+#define GS_CAN_MODE_NORMAL               0
+#define GS_CAN_MODE_LISTEN_ONLY          (1<<0)
+#define GS_CAN_MODE_LOOP_BACK            (1<<1)
+#define GS_CAN_MODE_TRIPLE_SAMPLE        (1<<2)
+#define GS_CAN_MODE_ONE_SHOT             (1<<3)
+
+struct gs_device_mode {
+	u32 mode;
+	u32 flags;
+} __packed;
+
+struct gs_device_state {
+	u32 state;
+	u32 rxerr;
+	u32 txerr;
+} __packed;
+
+struct gs_device_bittiming {
+	u32 prop_seg;
+	u32 phase_seg1;
+	u32 phase_seg2;
+	u32 sjw;
+	u32 brp;
+} __packed;
+
+#define GS_CAN_FEATURE_LISTEN_ONLY      (1<<0)
+#define GS_CAN_FEATURE_LOOP_BACK        (1<<1)
+#define GS_CAN_FEATURE_TRIPLE_SAMPLE    (1<<2)
+#define GS_CAN_FEATURE_ONE_SHOT         (1<<3)
+
+struct gs_device_bt_const {
+	u32 feature;
+	u32 fclk_can;
+	u32 tseg1_min;
+	u32 tseg1_max;
+	u32 tseg2_min;
+	u32 tseg2_max;
+	u32 sjw_max;
+	u32 brp_min;
+	u32 brp_max;
+	u32 brp_inc;
+} __packed;
+
+#define GS_CAN_FLAG_OVERFLOW 1
+
+struct gs_host_frame {
+	u32 echo_id;
+	u32 can_id;
+
+	u8 can_dlc;
+	u8 channel;
+	u8 flags;
+	u8 reserved;
+
+	u8 data[8];
+} __packed;
+/* The GS USB devices make use of the same flags and masks as in
+ * linux/can.h and linux/can/error.h, and no additional mapping is necessary.
+ */
+
+/* Only send a max of GS_MAX_TX_URBS frames per channel at a time. */
+#define GS_MAX_TX_URBS 10
+/* Only launch a max of GS_MAX_RX_URBS usb requests at a time. */
+#define GS_MAX_RX_URBS 30
+/* Maximum number of interfaces the driver supports per device.
+ * Current hardware only supports 2 interfaces. The future may vary.
+ */
+#define GS_MAX_INTF 2
+
+struct gs_tx_context {
+	struct gs_can *dev;
+	unsigned int echo_id;
+};
+
+struct gs_can {
+	struct can_priv can; /* must be the first member */
+
+	struct gs_usb *parent;
+
+	struct net_device *netdev;
+	struct usb_device *udev;
+	struct usb_interface *iface;
+
+	struct can_bittiming_const bt_const;
+	unsigned int channel;	/* channel number */
+
+	/* This lock prevents a race condition between xmit and recieve. */
+	spinlock_t tx_ctx_lock;
+	struct gs_tx_context tx_context[GS_MAX_TX_URBS];
+
+	struct usb_anchor tx_submitted;
+	atomic_t active_tx_urbs;
+};
+
+/* usb interface struct */
+struct gs_usb {
+	struct gs_can *canch[GS_MAX_INTF];
+	struct usb_anchor rx_submitted;
+	atomic_t active_channels;
+	struct usb_device *udev;
+};
+
+/* 'allocate' a tx context.
+ * returns a valid tx context or NULL if there is no space.
+ */
+static struct gs_tx_context *gs_alloc_tx_context(struct gs_can *dev)
+{
+	int i = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->tx_ctx_lock, flags);
+
+	for (; i < GS_MAX_TX_URBS; i++) {
+		if (dev->tx_context[i].echo_id == GS_MAX_TX_URBS) {
+			dev->tx_context[i].echo_id = i;
+			spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
+			return &dev->tx_context[i];
+		}
+	}
+
+	spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
+	return NULL;
+}
+
+/* releases a tx context
+ */
+static void gs_free_tx_context(struct gs_tx_context *txc)
+{
+	txc->echo_id = GS_MAX_TX_URBS;
+}
+
+/* Get a tx context by id.
+ */
+static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev, unsigned int id)
+{
+	unsigned long flags;
+
+	if (id < GS_MAX_TX_URBS) {
+		spin_lock_irqsave(&dev->tx_ctx_lock, flags);
+		if (dev->tx_context[id].echo_id == id) {
+			spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
+			return &dev->tx_context[id];
+		}
+		spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
+	}
+	return NULL;
+}
+
+static int gs_cmd_reset(struct gs_usb *gsusb, struct gs_can *gsdev)
+{
+	struct gs_device_mode *dm;
+	struct usb_interface *intf = gsdev->iface;
+	int rc;
+
+	dm = kzalloc(sizeof(*dm), GFP_KERNEL);
+	if (!dm)
+		return -ENOMEM;
+
+	dm->mode = GS_CAN_MODE_RESET;
+
+	rc = usb_control_msg(interface_to_usbdev(intf),
+			     usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+			     GS_USB_BREQ_MODE,
+			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     gsdev->channel,
+			     0,
+			     dm,
+			     sizeof(*dm),
+			     1000);
+
+	return rc;
+}
+
+static void gs_update_state(struct gs_can *dev, struct can_frame *cf)
+{
+	struct can_device_stats *can_stats = &dev->can.can_stats;
+
+	if (cf->can_id & CAN_ERR_RESTARTED) {
+		dev->can.state = CAN_STATE_ERROR_ACTIVE;
+		can_stats->restarts++;
+	} else if (cf->can_id & CAN_ERR_BUSOFF) {
+		dev->can.state = CAN_STATE_BUS_OFF;
+		can_stats->bus_off++;
+	} else if (cf->can_id & CAN_ERR_CRTL) {
+		if ((cf->data[1] & CAN_ERR_CRTL_TX_WARNING) ||
+		    (cf->data[1] & CAN_ERR_CRTL_RX_WARNING)) {
+			dev->can.state = CAN_STATE_ERROR_WARNING;
+			can_stats->error_warning++;
+		} else if ((cf->data[1] & CAN_ERR_CRTL_TX_PASSIVE) ||
+			   (cf->data[1] & CAN_ERR_CRTL_RX_PASSIVE)) {
+			dev->can.state = CAN_STATE_ERROR_PASSIVE;
+			can_stats->error_passive++;
+		} else {
+			dev->can.state = CAN_STATE_ERROR_ACTIVE;
+		}
+	}
+}
+
+static void gs_usb_recieve_bulk_callback(struct urb *urb)
+{
+	struct gs_usb *usbcan = urb->context;
+	struct gs_can *dev;
+	struct net_device *netdev;
+	int rc;
+	struct net_device_stats *stats;
+	struct gs_host_frame *hf = urb->transfer_buffer;
+	struct gs_tx_context *txc;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	BUG_ON(!usbcan);
+
+	switch (urb->status) {
+	case 0: /* success */
+		break;
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	default:
+		/* do not resubmit aborted urbs. eg: when device goes down */
+		return;
+	}
+
+	/* device reports out of range channel id */
+	if (hf->channel >= GS_MAX_INTF)
+		goto resubmit_urb;
+
+	dev = usbcan->canch[hf->channel];
+
+	netdev = dev->netdev;
+	stats = &netdev->stats;
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (hf->echo_id == -1) { /* normal rx */
+		skb = alloc_can_skb(dev->netdev, &cf);
+		if (!skb)
+			return;
+
+		cf->can_id = hf->can_id;
+
+		cf->can_dlc = get_can_dlc(hf->can_dlc);
+		memcpy(cf->data, hf->data, 8);
+
+		/* ERROR frames tell us information about the controller */
+		if (hf->can_id & CAN_ERR_FLAG)
+			gs_update_state(dev, cf);
+
+		netdev->stats.rx_packets++;
+		netdev->stats.rx_bytes += hf->can_dlc;
+
+		netif_rx(skb);
+	} else { /* echo_id == hf->echo_id */
+		if (hf->echo_id >= GS_MAX_TX_URBS) {
+			netdev_err(netdev,
+				   "Unexpected out of range echo id %d\n",
+				   hf->echo_id);
+			goto resubmit_urb;
+		}
+
+		netdev->stats.tx_packets++;
+		netdev->stats.tx_bytes += hf->can_dlc;
+
+		txc = gs_get_tx_context(dev, hf->echo_id);
+
+		/* bad devices send bad echo_ids. */
+		if (!txc) {
+			netdev_err(netdev,
+				   "Unexpected unused echo id %d\n",
+				   hf->echo_id);
+			goto resubmit_urb;
+		}
+
+		can_get_echo_skb(netdev, hf->echo_id);
+
+		gs_free_tx_context(txc);
+
+		netif_wake_queue(netdev);
+	}
+
+	if (hf->flags & GS_CAN_FLAG_OVERFLOW) {
+		skb = alloc_can_err_skb(netdev, &cf);
+		if (!skb)
+			goto resubmit_urb;
+
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->can_dlc = CAN_ERR_DLC;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+		netif_rx(skb);
+	}
+
+ resubmit_urb:
+	usb_fill_bulk_urb(urb,
+			  usbcan->udev,
+			  usb_rcvbulkpipe(usbcan->udev, GSUSB_ENDPOINT_IN),
+			  hf,
+			  sizeof(struct gs_host_frame),
+			  gs_usb_recieve_bulk_callback,
+			  usbcan
+			  );
+
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+
+	/* USB failure take down all interfaces */
+	if (rc == -ENODEV) {
+		for (rc = 0; rc < GS_MAX_INTF; rc++) {
+			if (usbcan->canch[rc])
+				netif_device_detach(usbcan->canch[rc]->netdev);
+		}
+	}
+}
+
+static int gs_usb_set_bittiming(struct net_device *netdev)
+{
+	struct gs_can *dev = netdev_priv(netdev);
+	struct can_bittiming *bt = &dev->can.bittiming;
+	struct usb_interface *intf = dev->iface;
+	int rc;
+	struct gs_device_bittiming *dbt;
+
+	dbt = kmalloc(sizeof(*dbt), GFP_KERNEL);
+	if (!dbt)
+		return -ENOMEM;
+
+	dbt->prop_seg = bt->prop_seg;
+	dbt->phase_seg1 = bt->phase_seg1;
+	dbt->phase_seg2 = bt->phase_seg2;
+	dbt->sjw = bt->sjw;
+	dbt->brp = bt->brp;
+
+	/* request bit timings */
+	rc = usb_control_msg(interface_to_usbdev(intf),
+			     usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+			     GS_USB_BREQ_BITTIMING,
+			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     dev->channel,
+			     0,
+			     dbt,
+			     sizeof(*dbt),
+			     1000);
+
+	kfree(dbt);
+
+	if (rc < 0)
+		dev_err(netdev->dev.parent, "Couldn't set bittimings (err=%d)",
+			rc);
+
+	return rc;
+}
+
+static void gs_usb_xmit_callback(struct urb *urb)
+{
+	struct gs_tx_context *txc = urb->context;
+	struct gs_can *dev = txc->dev;
+	struct net_device *netdev = dev->netdev;
+
+	if (urb->status)
+		netdev_info(netdev, "usb xmit fail %d\n", txc->echo_id);
+
+	usb_free_coherent(urb->dev,
+			  urb->transfer_buffer_length,
+			  urb->transfer_buffer,
+			  urb->transfer_dma);
+
+	atomic_dec(&dev->active_tx_urbs);
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (netif_queue_stopped(netdev))
+		netif_wake_queue(netdev);
+}
+
+static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct gs_can *dev = netdev_priv(netdev);
+	struct net_device_stats *stats = &dev->netdev->stats;
+	struct urb *urb;
+	struct gs_host_frame *hf;
+	struct can_frame *cf;
+	int rc;
+	unsigned int idx;
+	struct gs_tx_context *txc;
+
+	if (can_dropped_invalid_skb(netdev, skb))
+		return NETDEV_TX_OK;
+
+	/* find an empty context to keep track of transmission */
+	txc = gs_alloc_tx_context(dev);
+	if (!txc)
+		return NETDEV_TX_BUSY;
+
+	/* create a URB, and a buffer for it */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		netdev_err(netdev, "No memory left for URB\n");
+		goto nomem_urb;
+	}
+
+	hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC,
+				&urb->transfer_dma);
+	if (!hf) {
+		netdev_err(netdev, "No memory left for USB buffer\n");
+		goto nomem_hf;
+	}
+
+	idx = txc->echo_id;
+
+	if (idx >= GS_MAX_TX_URBS) {
+		netdev_err(netdev, "Invalid tx context %d\n", idx);
+		goto badidx;
+	}
+
+	hf->echo_id = idx;
+	hf->channel = dev->channel;
+
+	cf = (struct can_frame *)skb->data;
+
+	hf->can_id = cf->can_id;
+	hf->can_dlc = cf->can_dlc;
+	memcpy(hf->data, cf->data, cf->can_dlc);
+
+	usb_fill_bulk_urb(urb, dev->udev,
+			  usb_sndbulkpipe(dev->udev, GSUSB_ENDPOINT_OUT),
+			  hf,
+			  sizeof(*hf),
+			  gs_usb_xmit_callback,
+			  txc);
+
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	usb_anchor_urb(urb, &dev->tx_submitted);
+
+	can_put_echo_skb(skb, netdev, idx);
+
+	atomic_inc(&dev->active_tx_urbs);
+
+	rc = usb_submit_urb(urb, GFP_ATOMIC);
+	if (unlikely(rc)) {			/* usb send failed */
+		atomic_dec(&dev->active_tx_urbs);
+
+		can_free_echo_skb(netdev, idx);
+		gs_free_tx_context(txc);
+
+		usb_unanchor_urb(urb);
+		usb_free_coherent(dev->udev,
+				  sizeof(*hf),
+				  hf,
+				  urb->transfer_dma);
+
+
+		if (rc == -ENODEV) {
+			netif_device_detach(netdev);
+		} else {
+			netdev_err(netdev, "usb_submit failed (err=%d)\n", rc);
+			stats->tx_dropped++;
+		}
+	} else {
+		/* Slow down tx path */
+		if (atomic_read(&dev->active_tx_urbs) >= GS_MAX_TX_URBS)
+			netif_stop_queue(netdev);
+	}
+
+	/* let usb core take care of this urb */
+	usb_free_urb(urb);
+
+	return NETDEV_TX_OK;
+
+ badidx:
+	usb_free_coherent(dev->udev,
+			  sizeof(*hf),
+			  hf,
+			  urb->transfer_dma);
+ nomem_hf:
+	usb_free_urb(urb);
+
+ nomem_urb:
+	gs_free_tx_context(txc);
+	dev_kfree_skb(skb);
+	stats->tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+static int gs_can_open(struct net_device *netdev)
+{
+	struct gs_can *dev = netdev_priv(netdev);
+	struct gs_usb *parent = dev->parent;
+	int rc, i;
+	struct gs_device_mode *dm;
+	u32 ctrlmode;
+
+	rc = open_candev(netdev);
+	if (rc)
+		return rc;
+
+	if (atomic_add_return(1, &parent->active_channels) == 1) {
+		for (i = 0; i < GS_MAX_RX_URBS; i++) {
+			struct urb *urb;
+			u8 *buf;
+
+			/* alloc rx urb */
+			urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (!urb) {
+				netdev_err(netdev,
+					   "No memory left for URB\n");
+				return -ENOMEM;
+			}
+
+			/* alloc rx buffer */
+			buf = usb_alloc_coherent(dev->udev,
+						 sizeof(struct gs_host_frame),
+						 GFP_KERNEL,
+						 &urb->transfer_dma);
+			if (!buf) {
+				netdev_err(netdev,
+					   "No memory left for USB buffer\n");
+				usb_free_urb(urb);
+				return -ENOMEM;
+			}
+
+			/* fill, anchor, and submit rx urb */
+			usb_fill_bulk_urb(urb,
+					  dev->udev,
+					  usb_rcvbulkpipe(dev->udev,
+							  GSUSB_ENDPOINT_IN),
+					  buf,
+					  sizeof(struct gs_host_frame),
+					  gs_usb_recieve_bulk_callback,
+					  parent);
+			urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+			usb_anchor_urb(urb, &parent->rx_submitted);
+
+			rc = usb_submit_urb(urb, GFP_KERNEL);
+			if (rc) {
+				if (rc == -ENODEV)
+					netif_device_detach(dev->netdev);
+
+				netdev_err(netdev,
+					   "usb_submit failed (err=%d)\n",
+					   rc);
+
+				usb_unanchor_urb(urb);
+				break;
+			}
+
+			/* Drop reference,
+			 * USB core will take care of freeing it
+			 */
+			usb_free_urb(urb);
+		}
+	}
+
+	dm = kmalloc(sizeof(*dm), GFP_KERNEL);
+	if (!dm)
+		return -ENOMEM;
+
+	/* flags */
+	ctrlmode = dev->can.ctrlmode;
+	dm->flags = 0;
+
+	if (ctrlmode & CAN_CTRLMODE_LOOPBACK)
+		dm->flags |= GS_CAN_MODE_LOOP_BACK;
+	else if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		dm->flags |= GS_CAN_MODE_LISTEN_ONLY;
+
+	/* Controller is not allowed to retry TX
+	 * this mode is unavailable on atmels uc3c hardware
+	 */
+	if (ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		dm->flags |= GS_CAN_MODE_ONE_SHOT;
+
+	if (ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
+
+	/* finally start device */
+	dm->mode = GS_CAN_MODE_START;
+	rc = usb_control_msg(interface_to_usbdev(dev->iface),
+			     usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0),
+			     GS_USB_BREQ_MODE,
+			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     dev->channel,
+			     0,
+			     dm,
+			     sizeof(*dm),
+			     1000);
+
+	if (rc < 0) {
+		netdev_err(netdev, "Couldn't start device (err=%d)\n", rc);
+		kfree(dm);
+		return rc;
+	}
+
+	kfree(dm);
+
+	dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
+		netif_start_queue(netdev);
+
+	return 0;
+}
+
+static int gs_can_close(struct net_device *netdev)
+{
+	int rc;
+	struct gs_can *dev = netdev_priv(netdev);
+	struct gs_usb *parent = dev->parent;
+
+	netif_stop_queue(netdev);
+
+	/* Stop polling */
+	if (atomic_dec_and_test(&parent->active_channels))
+		usb_kill_anchored_urbs(&parent->rx_submitted);
+
+	/* Stop sending URBs */
+	usb_kill_anchored_urbs(&dev->tx_submitted);
+	atomic_set(&dev->active_tx_urbs, 0);
+
+	/* reset the device */
+	rc = gs_cmd_reset(parent, dev);
+	if (rc < 0)
+		netdev_warn(netdev, "Couldn't shutdown device (err=%d)", rc);
+
+	/* reset tx contexts */
+	for (rc = 0; rc < GS_MAX_TX_URBS; rc++) {
+		dev->tx_context[rc].dev = dev;
+		dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
+	}
+
+	/* close the netdev */
+	close_candev(netdev);
+
+	return 0;
+}
+
+static const struct net_device_ops gs_usb_netdev_ops = {
+	.ndo_open = gs_can_open,
+	.ndo_stop = gs_can_close,
+	.ndo_start_xmit = gs_can_start_xmit,
+};
+
+static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf)
+{
+	struct gs_can *dev;
+	struct net_device *netdev;
+	int rc;
+	struct gs_device_bt_const *bt_const;
+
+	bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL);
+	if (!bt_const)
+		return ERR_PTR(-ENOMEM);
+
+	/* fetch bit timing constants */
+	rc = usb_control_msg(interface_to_usbdev(intf),
+			     usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+			     GS_USB_BREQ_BT_CONST,
+			     USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     channel,
+			     0,
+			     bt_const,
+			     sizeof(*bt_const),
+			     1000);
+
+	if (rc < 0) {
+		dev_err(&intf->dev,
+			"Couldn't get bit timing const for channel (err=%d)\n",
+			rc);
+		kfree(bt_const);
+		return ERR_PTR(rc);
+	}
+
+	/* create netdev */
+	netdev = alloc_candev(sizeof(struct gs_can), GS_MAX_TX_URBS);
+	if (!netdev) {
+		dev_err(&intf->dev, "Couldn't allocate candev\n");
+		kfree(bt_const);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dev = netdev_priv(netdev);
+
+	netdev->netdev_ops = &gs_usb_netdev_ops;
+
+	netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
+
+	/* dev settup */
+	strcpy(dev->bt_const.name, "gs_usb");
+	dev->bt_const.tseg1_min = bt_const->tseg1_min;
+	dev->bt_const.tseg1_max = bt_const->tseg1_max;
+	dev->bt_const.tseg2_min = bt_const->tseg2_min;
+	dev->bt_const.tseg2_max = bt_const->tseg2_max;
+	dev->bt_const.sjw_max = bt_const->sjw_max;
+	dev->bt_const.brp_min = bt_const->brp_min;
+	dev->bt_const.brp_max = bt_const->brp_max;
+	dev->bt_const.brp_inc = bt_const->brp_inc;
+
+	dev->udev = interface_to_usbdev(intf);
+	dev->iface = intf;
+	dev->netdev = netdev;
+	dev->channel = channel;
+
+	init_usb_anchor(&dev->tx_submitted);
+	atomic_set(&dev->active_tx_urbs, 0);
+	spin_lock_init(&dev->tx_ctx_lock);
+	for (rc = 0; rc < GS_MAX_TX_URBS; rc++) {
+		dev->tx_context[rc].dev = dev;
+		dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
+	}
+
+	/* can settup */
+	dev->can.state = CAN_STATE_STOPPED;
+	dev->can.clock.freq = bt_const->fclk_can;
+	dev->can.bittiming_const = &dev->bt_const;
+	dev->can.do_set_bittiming = gs_usb_set_bittiming;
+
+	dev->can.ctrlmode_supported = 0;
+
+	if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY)
+		dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY;
+
+	if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK)
+		dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK;
+
+	if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE)
+		dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+
+	if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT)
+		dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
+
+	kfree(bt_const);
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+	rc = register_candev(dev->netdev);
+	if (rc) {
+		free_candev(dev->netdev);
+		dev_err(&intf->dev, "Couldn't register candev (err=%d)\n", rc);
+		return ERR_PTR(rc);
+	}
+
+	return dev;
+}
+
+static void gs_destroy_candev(struct gs_can *dev)
+{
+	unregister_candev(dev->netdev);
+	free_candev(dev->netdev);
+	usb_kill_anchored_urbs(&dev->tx_submitted);
+	kfree(dev);
+}
+
+static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct gs_usb *dev;
+	int rc = -ENOMEM;
+	unsigned int icount, i;
+	struct gs_host_config *hconf;
+	struct gs_device_config *dconf;
+
+	hconf = kmalloc(sizeof(*hconf), GFP_KERNEL);
+	if (!hconf)
+		return -ENOMEM;
+
+	hconf->byte_order = 0x0000beef;
+
+	/* send host config */
+	rc = usb_control_msg(interface_to_usbdev(intf),
+			     usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+			     GS_USB_BREQ_HOST_FORMAT,
+			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     1,
+			     intf->altsetting[0].desc.bInterfaceNumber,
+			     hconf,
+			     sizeof(*hconf),
+			     1000);
+
+	kfree(hconf);
+
+	if (rc < 0) {
+		dev_err(&intf->dev, "Couldn't send data format (err=%d)\n",
+			rc);
+		return rc;
+	}
+
+	dconf = kmalloc(sizeof(*dconf), GFP_KERNEL);
+	if (!dconf)
+		return -ENOMEM;
+
+	/* read device config */
+	rc = usb_control_msg(interface_to_usbdev(intf),
+			     usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+			     GS_USB_BREQ_DEVICE_CONFIG,
+			     USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     1,
+			     intf->altsetting[0].desc.bInterfaceNumber,
+			     dconf,
+			     sizeof(*dconf),
+			     1000);
+	if (rc < 0) {
+		dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n",
+			rc);
+
+		kfree(dconf);
+
+		return rc;
+	}
+
+	icount = dconf->icount+1;
+
+	kfree(dconf);
+
+	dev_info(&intf->dev, "Configuring for %d interfaces\n", icount);
+
+	if (icount > GS_MAX_INTF) {
+		dev_err(&intf->dev,
+			"Driver cannot handle more that %d CAN interfaces\n",
+			GS_MAX_INTF);
+		return -EINVAL;
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	init_usb_anchor(&dev->rx_submitted);
+
+	atomic_set(&dev->active_channels, 0);
+
+	usb_set_intfdata(intf, dev);
+	dev->udev = interface_to_usbdev(intf);
+
+	for (i = 0; i < icount; i++) {
+		dev->canch[i] = gs_make_candev(i, intf);
+		if (IS_ERR_OR_NULL(dev->canch[i])) {
+			/* on failure destroy previously created candevs */
+			icount = i;
+			for (i = 0; i < icount; i++) {
+				gs_destroy_candev(dev->canch[i]);
+				dev->canch[i] = NULL;
+			}
+			kfree(dev);
+			return rc;
+		}
+		dev->canch[i]->parent = dev;
+	}
+
+	return 0;
+}
+
+static void gs_usb_disconnect(struct usb_interface *intf)
+{
+	unsigned i;
+	struct gs_usb *dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+
+	if (!dev) {
+		dev_err(&intf->dev, "Disconnect (nodata)\n");
+		return;
+	}
+
+	for (i = 0; i < GS_MAX_INTF; i++) {
+		struct gs_can *can = dev->canch[i];
+
+		if (!can)
+			continue;
+
+		gs_destroy_candev(can);
+	}
+
+	usb_kill_anchored_urbs(&dev->rx_submitted);
+}
+
+static const struct usb_device_id gs_usb_table[] = {
+	{USB_DEVICE(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID)},
+	{} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, gs_usb_table);
+
+static struct usb_driver gs_usb_driver = {
+	.name       = "gs_usb",
+	.probe      = gs_usb_probe,
+	.disconnect = gs_usb_disconnect,
+	.id_table   = gs_usb_table,
+};
+
+module_usb_driver(gs_usb_driver);
+
+MODULE_AUTHOR("Maximilian Schneider <mws@schneidersoft.net>");
+MODULE_DESCRIPTION(
+"Socket CAN device driver for Geschwister Schneider Technologie-, "
+"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 4ca46edc061d..541fb7a05625 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -53,6 +53,8 @@
 #define USB_OEM_MERCURY_PRODUCT_ID	34
 #define USB_OEM_LEAF_PRODUCT_ID		35
 #define USB_CAN_R_PRODUCT_ID		39
+#define USB_LEAF_LITE_V2_PRODUCT_ID	288
+#define USB_MINI_PCIE_HS_PRODUCT_ID	289
 
 /* USB devices features */
 #define KVASER_HAS_SILENT_MODE		BIT(0)
@@ -356,6 +358,8 @@ static const struct usb_device_id kvaser_usb_table[] = {
 		.driver_info = KVASER_HAS_TXRX_ERRORS },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID),
 		.driver_info = KVASER_HAS_TXRX_ERRORS },
+	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) },
+	{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, kvaser_usb_table);
@@ -379,38 +383,43 @@ static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id,
 	void *buf;
 	int actual_len;
 	int err;
-	int pos = 0;
+	int pos;
+	unsigned long to = jiffies + msecs_to_jiffies(USB_RECV_TIMEOUT);
 
 	buf = kzalloc(RX_BUFFER_SIZE, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	err = usb_bulk_msg(dev->udev,
-			   usb_rcvbulkpipe(dev->udev,
-					   dev->bulk_in->bEndpointAddress),
-			   buf, RX_BUFFER_SIZE, &actual_len,
-			   USB_RECV_TIMEOUT);
-	if (err < 0)
-		goto end;
+	do {
+		err = usb_bulk_msg(dev->udev,
+				   usb_rcvbulkpipe(dev->udev,
+					dev->bulk_in->bEndpointAddress),
+				   buf, RX_BUFFER_SIZE, &actual_len,
+				   USB_RECV_TIMEOUT);
+		if (err < 0)
+			goto end;
 
-	while (pos <= actual_len - MSG_HEADER_LEN) {
-		tmp = buf + pos;
+		pos = 0;
+		while (pos <= actual_len - MSG_HEADER_LEN) {
+			tmp = buf + pos;
 
-		if (!tmp->len)
-			break;
+			if (!tmp->len)
+				break;
 
-		if (pos + tmp->len > actual_len) {
-			dev_err(dev->udev->dev.parent, "Format error\n");
-			break;
-		}
+			if (pos + tmp->len > actual_len) {
+				dev_err(dev->udev->dev.parent,
+					"Format error\n");
+				break;
+			}
 
-		if (tmp->id == id) {
-			memcpy(msg, tmp, tmp->len);
-			goto end;
-		}
+			if (tmp->id == id) {
+				memcpy(msg, tmp, tmp->len);
+				goto end;
+			}
 
-		pos += tmp->len;
-	}
+			pos += tmp->len;
+		}
+	} while (time_before(jiffies, to));
 
 	err = -EINVAL;
 
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
new file mode 100644
index 000000000000..5e8b5609c067
--- /dev/null
+++ b/drivers/net/can/xilinx_can.c
@@ -0,0 +1,1208 @@
+/* Xilinx CAN device driver
+ *
+ * Copyright (C) 2012 - 2014 Xilinx, Inc.
+ * Copyright (C) 2009 PetaLogix. All rights reserved.
+ *
+ * Description:
+ * This driver is developed for Axi CAN IP and for Zynq CANPS Controller.
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/led.h>
+
+#define DRIVER_NAME	"xilinx_can"
+
+/* CAN registers set */
+enum xcan_reg {
+	XCAN_SRR_OFFSET		= 0x00, /* Software reset */
+	XCAN_MSR_OFFSET		= 0x04, /* Mode select */
+	XCAN_BRPR_OFFSET	= 0x08, /* Baud rate prescaler */
+	XCAN_BTR_OFFSET		= 0x0C, /* Bit timing */
+	XCAN_ECR_OFFSET		= 0x10, /* Error counter */
+	XCAN_ESR_OFFSET		= 0x14, /* Error status */
+	XCAN_SR_OFFSET		= 0x18, /* Status */
+	XCAN_ISR_OFFSET		= 0x1C, /* Interrupt status */
+	XCAN_IER_OFFSET		= 0x20, /* Interrupt enable */
+	XCAN_ICR_OFFSET		= 0x24, /* Interrupt clear */
+	XCAN_TXFIFO_ID_OFFSET	= 0x30,/* TX FIFO ID */
+	XCAN_TXFIFO_DLC_OFFSET	= 0x34, /* TX FIFO DLC */
+	XCAN_TXFIFO_DW1_OFFSET	= 0x38, /* TX FIFO Data Word 1 */
+	XCAN_TXFIFO_DW2_OFFSET	= 0x3C, /* TX FIFO Data Word 2 */
+	XCAN_RXFIFO_ID_OFFSET	= 0x50, /* RX FIFO ID */
+	XCAN_RXFIFO_DLC_OFFSET	= 0x54, /* RX FIFO DLC */
+	XCAN_RXFIFO_DW1_OFFSET	= 0x58, /* RX FIFO Data Word 1 */
+	XCAN_RXFIFO_DW2_OFFSET	= 0x5C, /* RX FIFO Data Word 2 */
+};
+
+/* CAN register bit masks - XCAN_<REG>_<BIT>_MASK */
+#define XCAN_SRR_CEN_MASK		0x00000002 /* CAN enable */
+#define XCAN_SRR_RESET_MASK		0x00000001 /* Soft Reset the CAN core */
+#define XCAN_MSR_LBACK_MASK		0x00000002 /* Loop back mode select */
+#define XCAN_MSR_SLEEP_MASK		0x00000001 /* Sleep mode select */
+#define XCAN_BRPR_BRP_MASK		0x000000FF /* Baud rate prescaler */
+#define XCAN_BTR_SJW_MASK		0x00000180 /* Synchronous jump width */
+#define XCAN_BTR_TS2_MASK		0x00000070 /* Time segment 2 */
+#define XCAN_BTR_TS1_MASK		0x0000000F /* Time segment 1 */
+#define XCAN_ECR_REC_MASK		0x0000FF00 /* Receive error counter */
+#define XCAN_ECR_TEC_MASK		0x000000FF /* Transmit error counter */
+#define XCAN_ESR_ACKER_MASK		0x00000010 /* ACK error */
+#define XCAN_ESR_BERR_MASK		0x00000008 /* Bit error */
+#define XCAN_ESR_STER_MASK		0x00000004 /* Stuff error */
+#define XCAN_ESR_FMER_MASK		0x00000002 /* Form error */
+#define XCAN_ESR_CRCER_MASK		0x00000001 /* CRC error */
+#define XCAN_SR_TXFLL_MASK		0x00000400 /* TX FIFO is full */
+#define XCAN_SR_ESTAT_MASK		0x00000180 /* Error status */
+#define XCAN_SR_ERRWRN_MASK		0x00000040 /* Error warning */
+#define XCAN_SR_NORMAL_MASK		0x00000008 /* Normal mode */
+#define XCAN_SR_LBACK_MASK		0x00000002 /* Loop back mode */
+#define XCAN_SR_CONFIG_MASK		0x00000001 /* Configuration mode */
+#define XCAN_IXR_TXFEMP_MASK		0x00004000 /* TX FIFO Empty */
+#define XCAN_IXR_WKUP_MASK		0x00000800 /* Wake up interrupt */
+#define XCAN_IXR_SLP_MASK		0x00000400 /* Sleep interrupt */
+#define XCAN_IXR_BSOFF_MASK		0x00000200 /* Bus off interrupt */
+#define XCAN_IXR_ERROR_MASK		0x00000100 /* Error interrupt */
+#define XCAN_IXR_RXNEMP_MASK		0x00000080 /* RX FIFO NotEmpty intr */
+#define XCAN_IXR_RXOFLW_MASK		0x00000040 /* RX FIFO Overflow intr */
+#define XCAN_IXR_RXOK_MASK		0x00000010 /* Message received intr */
+#define XCAN_IXR_TXFLL_MASK		0x00000004 /* Tx FIFO Full intr */
+#define XCAN_IXR_TXOK_MASK		0x00000002 /* TX successful intr */
+#define XCAN_IXR_ARBLST_MASK		0x00000001 /* Arbitration lost intr */
+#define XCAN_IDR_ID1_MASK		0xFFE00000 /* Standard msg identifier */
+#define XCAN_IDR_SRR_MASK		0x00100000 /* Substitute remote TXreq */
+#define XCAN_IDR_IDE_MASK		0x00080000 /* Identifier extension */
+#define XCAN_IDR_ID2_MASK		0x0007FFFE /* Extended message ident */
+#define XCAN_IDR_RTR_MASK		0x00000001 /* Remote TX request */
+#define XCAN_DLCR_DLC_MASK		0xF0000000 /* Data length code */
+
+#define XCAN_INTR_ALL		(XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\
+				 XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \
+				 XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \
+				 XCAN_IXR_ARBLST_MASK | XCAN_IXR_RXOK_MASK)
+
+/* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */
+#define XCAN_BTR_SJW_SHIFT		7  /* Synchronous jump width */
+#define XCAN_BTR_TS2_SHIFT		4  /* Time segment 2 */
+#define XCAN_IDR_ID1_SHIFT		21 /* Standard Messg Identifier */
+#define XCAN_IDR_ID2_SHIFT		1  /* Extended Message Identifier */
+#define XCAN_DLCR_DLC_SHIFT		28 /* Data length code */
+#define XCAN_ESR_REC_SHIFT		8  /* Rx Error Count */
+
+/* CAN frame length constants */
+#define XCAN_FRAME_MAX_DATA_LEN		8
+#define XCAN_TIMEOUT			(1 * HZ)
+
+/**
+ * struct xcan_priv - This definition define CAN driver instance
+ * @can:			CAN private data structure.
+ * @tx_head:			Tx CAN packets ready to send on the queue
+ * @tx_tail:			Tx CAN packets successfully sended on the queue
+ * @tx_max:			Maximum number packets the driver can send
+ * @napi:			NAPI structure
+ * @read_reg:			For reading data from CAN registers
+ * @write_reg:			For writing data to CAN registers
+ * @dev:			Network device data structure
+ * @reg_base:			Ioremapped address to registers
+ * @irq_flags:			For request_irq()
+ * @bus_clk:			Pointer to struct clk
+ * @can_clk:			Pointer to struct clk
+ */
+struct xcan_priv {
+	struct can_priv can;
+	unsigned int tx_head;
+	unsigned int tx_tail;
+	unsigned int tx_max;
+	struct napi_struct napi;
+	u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
+	void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
+			u32 val);
+	struct net_device *dev;
+	void __iomem *reg_base;
+	unsigned long irq_flags;
+	struct clk *bus_clk;
+	struct clk *can_clk;
+};
+
+/* CAN Bittiming constants as per Xilinx CAN specs */
+static const struct can_bittiming_const xcan_bittiming_const = {
+	.name = DRIVER_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
+/**
+ * xcan_write_reg_le - Write a value to the device register little endian
+ * @priv:	Driver private data structure
+ * @reg:	Register offset
+ * @val:	Value to write at the Register offset
+ *
+ * Write data to the paricular CAN register
+ */
+static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg,
+			u32 val)
+{
+	iowrite32(val, priv->reg_base + reg);
+}
+
+/**
+ * xcan_read_reg_le - Read a value from the device register little endian
+ * @priv:	Driver private data structure
+ * @reg:	Register offset
+ *
+ * Read data from the particular CAN register
+ * Return: value read from the CAN register
+ */
+static u32 xcan_read_reg_le(const struct xcan_priv *priv, enum xcan_reg reg)
+{
+	return ioread32(priv->reg_base + reg);
+}
+
+/**
+ * xcan_write_reg_be - Write a value to the device register big endian
+ * @priv:	Driver private data structure
+ * @reg:	Register offset
+ * @val:	Value to write at the Register offset
+ *
+ * Write data to the paricular CAN register
+ */
+static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg,
+			u32 val)
+{
+	iowrite32be(val, priv->reg_base + reg);
+}
+
+/**
+ * xcan_read_reg_be - Read a value from the device register big endian
+ * @priv:	Driver private data structure
+ * @reg:	Register offset
+ *
+ * Read data from the particular CAN register
+ * Return: value read from the CAN register
+ */
+static u32 xcan_read_reg_be(const struct xcan_priv *priv, enum xcan_reg reg)
+{
+	return ioread32be(priv->reg_base + reg);
+}
+
+/**
+ * set_reset_mode - Resets the CAN device mode
+ * @ndev:	Pointer to net_device structure
+ *
+ * This is the driver reset mode routine.The driver
+ * enters into configuration mode.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int set_reset_mode(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	unsigned long timeout;
+
+	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+
+	timeout = jiffies + XCAN_TIMEOUT;
+	while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & XCAN_SR_CONFIG_MASK)) {
+		if (time_after(jiffies, timeout)) {
+			netdev_warn(ndev, "timed out for config mode\n");
+			return -ETIMEDOUT;
+		}
+		usleep_range(500, 10000);
+	}
+
+	return 0;
+}
+
+/**
+ * xcan_set_bittiming - CAN set bit timing routine
+ * @ndev:	Pointer to net_device structure
+ *
+ * This is the driver set bittiming  routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_set_bittiming(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u32 btr0, btr1;
+	u32 is_config_mode;
+
+	/* Check whether Xilinx CAN is in configuration mode.
+	 * It cannot set bit timing if Xilinx CAN is not in configuration mode.
+	 */
+	is_config_mode = priv->read_reg(priv, XCAN_SR_OFFSET) &
+				XCAN_SR_CONFIG_MASK;
+	if (!is_config_mode) {
+		netdev_alert(ndev,
+		     "BUG! Cannot set bittiming - CAN is not in config mode\n");
+		return -EPERM;
+	}
+
+	/* Setting Baud Rate prescalar value in BRPR Register */
+	btr0 = (bt->brp - 1);
+
+	/* Setting Time Segment 1 in BTR Register */
+	btr1 = (bt->prop_seg + bt->phase_seg1 - 1);
+
+	/* Setting Time Segment 2 in BTR Register */
+	btr1 |= (bt->phase_seg2 - 1) << XCAN_BTR_TS2_SHIFT;
+
+	/* Setting Synchronous jump width in BTR Register */
+	btr1 |= (bt->sjw - 1) << XCAN_BTR_SJW_SHIFT;
+
+	priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0);
+	priv->write_reg(priv, XCAN_BTR_OFFSET, btr1);
+
+	netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n",
+			priv->read_reg(priv, XCAN_BRPR_OFFSET),
+			priv->read_reg(priv, XCAN_BTR_OFFSET));
+
+	return 0;
+}
+
+/**
+ * xcan_chip_start - This the drivers start routine
+ * @ndev:	Pointer to net_device structure
+ *
+ * This is the drivers start routine.
+ * Based on the State of the CAN device it puts
+ * the CAN device into a proper mode.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_chip_start(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	u32 err, reg_msr, reg_sr_mask;
+	unsigned long timeout;
+
+	/* Check if it is in reset mode */
+	err = set_reset_mode(ndev);
+	if (err < 0)
+		return err;
+
+	err = xcan_set_bittiming(ndev);
+	if (err < 0)
+		return err;
+
+	/* Enable interrupts */
+	priv->write_reg(priv, XCAN_IER_OFFSET, XCAN_INTR_ALL);
+
+	/* Check whether it is loopback mode or normal mode  */
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+		reg_msr = XCAN_MSR_LBACK_MASK;
+		reg_sr_mask = XCAN_SR_LBACK_MASK;
+	} else {
+		reg_msr = 0x0;
+		reg_sr_mask = XCAN_SR_NORMAL_MASK;
+	}
+
+	priv->write_reg(priv, XCAN_MSR_OFFSET, reg_msr);
+	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
+
+	timeout = jiffies + XCAN_TIMEOUT;
+	while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & reg_sr_mask)) {
+		if (time_after(jiffies, timeout)) {
+			netdev_warn(ndev,
+				"timed out for correct mode\n");
+			return -ETIMEDOUT;
+		}
+	}
+	netdev_dbg(ndev, "status:#x%08x\n",
+			priv->read_reg(priv, XCAN_SR_OFFSET));
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+	return 0;
+}
+
+/**
+ * xcan_do_set_mode - This sets the mode of the driver
+ * @ndev:	Pointer to net_device structure
+ * @mode:	Tells the mode of the driver
+ *
+ * This check the drivers state and calls the
+ * the corresponding modes to set.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		ret = xcan_chip_start(ndev);
+		if (ret < 0) {
+			netdev_err(ndev, "xcan_chip_start failed!\n");
+			return ret;
+		}
+		netif_wake_queue(ndev);
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * xcan_start_xmit - Starts the transmission
+ * @skb:	sk_buff pointer that contains data to be Txed
+ * @ndev:	Pointer to net_device structure
+ *
+ * This function is invoked from upper layers to initiate transmission. This
+ * function uses the next available free txbuff and populates their fields to
+ * start the transmission.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	u32 id, dlc, data[2] = {0, 0};
+
+	if (can_dropped_invalid_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
+	/* Check if the TX buffer is full */
+	if (unlikely(priv->read_reg(priv, XCAN_SR_OFFSET) &
+			XCAN_SR_TXFLL_MASK)) {
+		netif_stop_queue(ndev);
+		netdev_err(ndev, "BUG!, TX FIFO full when queue awake!\n");
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Watch carefully on the bit sequence */
+	if (cf->can_id & CAN_EFF_FLAG) {
+		/* Extended CAN ID format */
+		id = ((cf->can_id & CAN_EFF_MASK) << XCAN_IDR_ID2_SHIFT) &
+			XCAN_IDR_ID2_MASK;
+		id |= (((cf->can_id & CAN_EFF_MASK) >>
+			(CAN_EFF_ID_BITS-CAN_SFF_ID_BITS)) <<
+			XCAN_IDR_ID1_SHIFT) & XCAN_IDR_ID1_MASK;
+
+		/* The substibute remote TX request bit should be "1"
+		 * for extended frames as in the Xilinx CAN datasheet
+		 */
+		id |= XCAN_IDR_IDE_MASK | XCAN_IDR_SRR_MASK;
+
+		if (cf->can_id & CAN_RTR_FLAG)
+			/* Extended frames remote TX request */
+			id |= XCAN_IDR_RTR_MASK;
+	} else {
+		/* Standard CAN ID format */
+		id = ((cf->can_id & CAN_SFF_MASK) << XCAN_IDR_ID1_SHIFT) &
+			XCAN_IDR_ID1_MASK;
+
+		if (cf->can_id & CAN_RTR_FLAG)
+			/* Standard frames remote TX request */
+			id |= XCAN_IDR_SRR_MASK;
+	}
+
+	dlc = cf->can_dlc << XCAN_DLCR_DLC_SHIFT;
+
+	if (cf->can_dlc > 0)
+		data[0] = be32_to_cpup((__be32 *)(cf->data + 0));
+	if (cf->can_dlc > 4)
+		data[1] = be32_to_cpup((__be32 *)(cf->data + 4));
+
+	can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max);
+	priv->tx_head++;
+
+	/* Write the Frame to Xilinx CAN TX FIFO */
+	priv->write_reg(priv, XCAN_TXFIFO_ID_OFFSET, id);
+	/* If the CAN frame is RTR frame this write triggers tranmission */
+	priv->write_reg(priv, XCAN_TXFIFO_DLC_OFFSET, dlc);
+	if (!(cf->can_id & CAN_RTR_FLAG)) {
+		priv->write_reg(priv, XCAN_TXFIFO_DW1_OFFSET, data[0]);
+		/* If the CAN frame is Standard/Extended frame this
+		 * write triggers tranmission
+		 */
+		priv->write_reg(priv, XCAN_TXFIFO_DW2_OFFSET, data[1]);
+		stats->tx_bytes += cf->can_dlc;
+	}
+
+	/* Check if the TX buffer is full */
+	if ((priv->tx_head - priv->tx_tail) == priv->tx_max)
+		netif_stop_queue(ndev);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * xcan_rx -  Is called from CAN isr to complete the received
+ *		frame  processing
+ * @ndev:	Pointer to net_device structure
+ *
+ * This function is invoked from the CAN isr(poll) to process the Rx frames. It
+ * does minimal processing and invokes "netif_receive_skb" to complete further
+ * processing.
+ * Return: 1 on success and 0 on failure.
+ */
+static int xcan_rx(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 id_xcan, dlc, data[2] = {0, 0};
+
+	skb = alloc_can_skb(ndev, &cf);
+	if (unlikely(!skb)) {
+		stats->rx_dropped++;
+		return 0;
+	}
+
+	/* Read a frame from Xilinx zynq CANPS */
+	id_xcan = priv->read_reg(priv, XCAN_RXFIFO_ID_OFFSET);
+	dlc = priv->read_reg(priv, XCAN_RXFIFO_DLC_OFFSET) >>
+				XCAN_DLCR_DLC_SHIFT;
+
+	/* Change Xilinx CAN data length format to socketCAN data format */
+	cf->can_dlc = get_can_dlc(dlc);
+
+	/* Change Xilinx CAN ID format to socketCAN ID format */
+	if (id_xcan & XCAN_IDR_IDE_MASK) {
+		/* The received frame is an Extended format frame */
+		cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
+		cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
+				XCAN_IDR_ID2_SHIFT;
+		cf->can_id |= CAN_EFF_FLAG;
+		if (id_xcan & XCAN_IDR_RTR_MASK)
+			cf->can_id |= CAN_RTR_FLAG;
+	} else {
+		/* The received frame is a standard format frame */
+		cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
+				XCAN_IDR_ID1_SHIFT;
+		if (id_xcan & XCAN_IDR_SRR_MASK)
+			cf->can_id |= CAN_RTR_FLAG;
+	}
+
+	if (!(id_xcan & XCAN_IDR_SRR_MASK)) {
+		data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET);
+		data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET);
+
+		/* Change Xilinx CAN data format to socketCAN data format */
+		if (cf->can_dlc > 0)
+			*(__be32 *)(cf->data) = cpu_to_be32(data[0]);
+		if (cf->can_dlc > 4)
+			*(__be32 *)(cf->data + 4) = cpu_to_be32(data[1]);
+	}
+
+	stats->rx_bytes += cf->can_dlc;
+	stats->rx_packets++;
+	netif_receive_skb(skb);
+
+	return 1;
+}
+
+/**
+ * xcan_err_interrupt - error frame Isr
+ * @ndev:	net_device pointer
+ * @isr:	interrupt status register value
+ *
+ * This is the CAN error interrupt and it will
+ * check the the type of error and forward the error
+ * frame to upper layers.
+ */
+static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 err_status, status, txerr = 0, rxerr = 0;
+
+	skb = alloc_can_err_skb(ndev, &cf);
+
+	err_status = priv->read_reg(priv, XCAN_ESR_OFFSET);
+	priv->write_reg(priv, XCAN_ESR_OFFSET, err_status);
+	txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
+	rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
+			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
+	status = priv->read_reg(priv, XCAN_SR_OFFSET);
+
+	if (isr & XCAN_IXR_BSOFF_MASK) {
+		priv->can.state = CAN_STATE_BUS_OFF;
+		priv->can.can_stats.bus_off++;
+		/* Leave device in Config Mode in bus-off state */
+		priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+		can_bus_off(ndev);
+		if (skb)
+			cf->can_id |= CAN_ERR_BUSOFF;
+	} else if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) {
+		priv->can.state = CAN_STATE_ERROR_PASSIVE;
+		priv->can.can_stats.error_passive++;
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] = (rxerr > 127) ?
+					CAN_ERR_CRTL_RX_PASSIVE :
+					CAN_ERR_CRTL_TX_PASSIVE;
+			cf->data[6] = txerr;
+			cf->data[7] = rxerr;
+		}
+	} else if (status & XCAN_SR_ERRWRN_MASK) {
+		priv->can.state = CAN_STATE_ERROR_WARNING;
+		priv->can.can_stats.error_warning++;
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] |= (txerr > rxerr) ?
+					CAN_ERR_CRTL_TX_WARNING :
+					CAN_ERR_CRTL_RX_WARNING;
+			cf->data[6] = txerr;
+			cf->data[7] = rxerr;
+		}
+	}
+
+	/* Check for Arbitration lost interrupt */
+	if (isr & XCAN_IXR_ARBLST_MASK) {
+		priv->can.can_stats.arbitration_lost++;
+		if (skb) {
+			cf->can_id |= CAN_ERR_LOSTARB;
+			cf->data[0] = CAN_ERR_LOSTARB_UNSPEC;
+		}
+	}
+
+	/* Check for RX FIFO Overflow interrupt */
+	if (isr & XCAN_IXR_RXOFLW_MASK) {
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+		priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+		if (skb) {
+			cf->can_id |= CAN_ERR_CRTL;
+			cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
+		}
+	}
+
+	/* Check for error interrupt */
+	if (isr & XCAN_IXR_ERROR_MASK) {
+		if (skb) {
+			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+			cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+		}
+
+		/* Check for Ack error interrupt */
+		if (err_status & XCAN_ESR_ACKER_MASK) {
+			stats->tx_errors++;
+			if (skb) {
+				cf->can_id |= CAN_ERR_ACK;
+				cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
+			}
+		}
+
+		/* Check for Bit error interrupt */
+		if (err_status & XCAN_ESR_BERR_MASK) {
+			stats->tx_errors++;
+			if (skb) {
+				cf->can_id |= CAN_ERR_PROT;
+				cf->data[2] = CAN_ERR_PROT_BIT;
+			}
+		}
+
+		/* Check for Stuff error interrupt */
+		if (err_status & XCAN_ESR_STER_MASK) {
+			stats->rx_errors++;
+			if (skb) {
+				cf->can_id |= CAN_ERR_PROT;
+				cf->data[2] = CAN_ERR_PROT_STUFF;
+			}
+		}
+
+		/* Check for Form error interrupt */
+		if (err_status & XCAN_ESR_FMER_MASK) {
+			stats->rx_errors++;
+			if (skb) {
+				cf->can_id |= CAN_ERR_PROT;
+				cf->data[2] = CAN_ERR_PROT_FORM;
+			}
+		}
+
+		/* Check for CRC error interrupt */
+		if (err_status & XCAN_ESR_CRCER_MASK) {
+			stats->rx_errors++;
+			if (skb) {
+				cf->can_id |= CAN_ERR_PROT;
+				cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ |
+						CAN_ERR_PROT_LOC_CRC_DEL;
+			}
+		}
+			priv->can.can_stats.bus_error++;
+	}
+
+	if (skb) {
+		stats->rx_packets++;
+		stats->rx_bytes += cf->can_dlc;
+		netif_rx(skb);
+	}
+
+	netdev_dbg(ndev, "%s: error status register:0x%x\n",
+			__func__, priv->read_reg(priv, XCAN_ESR_OFFSET));
+}
+
+/**
+ * xcan_state_interrupt - It will check the state of the CAN device
+ * @ndev:	net_device pointer
+ * @isr:	interrupt status register value
+ *
+ * This will checks the state of the CAN device
+ * and puts the device into appropriate state.
+ */
+static void xcan_state_interrupt(struct net_device *ndev, u32 isr)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+
+	/* Check for Sleep interrupt if set put CAN device in sleep state */
+	if (isr & XCAN_IXR_SLP_MASK)
+		priv->can.state = CAN_STATE_SLEEPING;
+
+	/* Check for Wake up interrupt if set put CAN device in Active state */
+	if (isr & XCAN_IXR_WKUP_MASK)
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+/**
+ * xcan_rx_poll - Poll routine for rx packets (NAPI)
+ * @napi:	napi structure pointer
+ * @quota:	Max number of rx packets to be processed.
+ *
+ * This is the poll routine for rx part.
+ * It will process the packets maximux quota value.
+ *
+ * Return: number of packets received
+ */
+static int xcan_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *ndev = napi->dev;
+	struct xcan_priv *priv = netdev_priv(ndev);
+	u32 isr, ier;
+	int work_done = 0;
+
+	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+	while ((isr & XCAN_IXR_RXNEMP_MASK) && (work_done < quota)) {
+		if (isr & XCAN_IXR_RXOK_MASK) {
+			priv->write_reg(priv, XCAN_ICR_OFFSET,
+				XCAN_IXR_RXOK_MASK);
+			work_done += xcan_rx(ndev);
+		} else {
+			priv->write_reg(priv, XCAN_ICR_OFFSET,
+				XCAN_IXR_RXNEMP_MASK);
+			break;
+		}
+		priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXNEMP_MASK);
+		isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+	}
+
+	if (work_done)
+		can_led_event(ndev, CAN_LED_EVENT_RX);
+
+	if (work_done < quota) {
+		napi_complete(napi);
+		ier = priv->read_reg(priv, XCAN_IER_OFFSET);
+		ier |= (XCAN_IXR_RXOK_MASK | XCAN_IXR_RXNEMP_MASK);
+		priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+	}
+	return work_done;
+}
+
+/**
+ * xcan_tx_interrupt - Tx Done Isr
+ * @ndev:	net_device pointer
+ * @isr:	Interrupt status register value
+ */
+static void xcan_tx_interrupt(struct net_device *ndev, u32 isr)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+
+	while ((priv->tx_head - priv->tx_tail > 0) &&
+			(isr & XCAN_IXR_TXOK_MASK)) {
+		priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK);
+		can_get_echo_skb(ndev, priv->tx_tail %
+					priv->tx_max);
+		priv->tx_tail++;
+		stats->tx_packets++;
+		isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+	}
+	can_led_event(ndev, CAN_LED_EVENT_TX);
+	netif_wake_queue(ndev);
+}
+
+/**
+ * xcan_interrupt - CAN Isr
+ * @irq:	irq number
+ * @dev_id:	device id poniter
+ *
+ * This is the xilinx CAN Isr. It checks for the type of interrupt
+ * and invokes the corresponding ISR.
+ *
+ * Return:
+ * IRQ_NONE - If CAN device is in sleep mode, IRQ_HANDLED otherwise
+ */
+static irqreturn_t xcan_interrupt(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct xcan_priv *priv = netdev_priv(ndev);
+	u32 isr, ier;
+
+	/* Get the interrupt status from Xilinx CAN */
+	isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+	if (!isr)
+		return IRQ_NONE;
+
+	/* Check for the type of interrupt and Processing it */
+	if (isr & (XCAN_IXR_SLP_MASK | XCAN_IXR_WKUP_MASK)) {
+		priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_SLP_MASK |
+				XCAN_IXR_WKUP_MASK));
+		xcan_state_interrupt(ndev, isr);
+	}
+
+	/* Check for Tx interrupt and Processing it */
+	if (isr & XCAN_IXR_TXOK_MASK)
+		xcan_tx_interrupt(ndev, isr);
+
+	/* Check for the type of error interrupt and Processing it */
+	if (isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
+			XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK)) {
+		priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_ERROR_MASK |
+				XCAN_IXR_RXOFLW_MASK | XCAN_IXR_BSOFF_MASK |
+				XCAN_IXR_ARBLST_MASK));
+		xcan_err_interrupt(ndev, isr);
+	}
+
+	/* Check for the type of receive interrupt and Processing it */
+	if (isr & (XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK)) {
+		ier = priv->read_reg(priv, XCAN_IER_OFFSET);
+		ier &= ~(XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK);
+		priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+		napi_schedule(&priv->napi);
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * xcan_chip_stop - Driver stop routine
+ * @ndev:	Pointer to net_device structure
+ *
+ * This is the drivers stop routine. It will disable the
+ * interrupts and put the device into configuration mode.
+ */
+static void xcan_chip_stop(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	u32 ier;
+
+	/* Disable interrupts and leave the can in configuration mode */
+	ier = priv->read_reg(priv, XCAN_IER_OFFSET);
+	ier &= ~XCAN_INTR_ALL;
+	priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+/**
+ * xcan_open - Driver open routine
+ * @ndev:	Pointer to net_device structure
+ *
+ * This is the driver open routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_open(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	int ret;
+
+	ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
+			ndev->name, ndev);
+	if (ret < 0) {
+		netdev_err(ndev, "irq allocation for CAN failed\n");
+		goto err;
+	}
+
+	ret = clk_prepare_enable(priv->can_clk);
+	if (ret) {
+		netdev_err(ndev, "unable to enable device clock\n");
+		goto err_irq;
+	}
+
+	ret = clk_prepare_enable(priv->bus_clk);
+	if (ret) {
+		netdev_err(ndev, "unable to enable bus clock\n");
+		goto err_can_clk;
+	}
+
+	/* Set chip into reset mode */
+	ret = set_reset_mode(ndev);
+	if (ret < 0) {
+		netdev_err(ndev, "mode resetting failed!\n");
+		goto err_bus_clk;
+	}
+
+	/* Common open */
+	ret = open_candev(ndev);
+	if (ret)
+		goto err_bus_clk;
+
+	ret = xcan_chip_start(ndev);
+	if (ret < 0) {
+		netdev_err(ndev, "xcan_chip_start failed!\n");
+		goto err_candev;
+	}
+
+	can_led_event(ndev, CAN_LED_EVENT_OPEN);
+	napi_enable(&priv->napi);
+	netif_start_queue(ndev);
+
+	return 0;
+
+err_candev:
+	close_candev(ndev);
+err_bus_clk:
+	clk_disable_unprepare(priv->bus_clk);
+err_can_clk:
+	clk_disable_unprepare(priv->can_clk);
+err_irq:
+	free_irq(ndev->irq, ndev);
+err:
+	return ret;
+}
+
+/**
+ * xcan_close - Driver close routine
+ * @ndev:	Pointer to net_device structure
+ *
+ * Return: 0 always
+ */
+static int xcan_close(struct net_device *ndev)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	xcan_chip_stop(ndev);
+	clk_disable_unprepare(priv->bus_clk);
+	clk_disable_unprepare(priv->can_clk);
+	free_irq(ndev->irq, ndev);
+	close_candev(ndev);
+
+	can_led_event(ndev, CAN_LED_EVENT_STOP);
+
+	return 0;
+}
+
+/**
+ * xcan_get_berr_counter - error counter routine
+ * @ndev:	Pointer to net_device structure
+ * @bec:	Pointer to can_berr_counter structure
+ *
+ * This is the driver error counter routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_get_berr_counter(const struct net_device *ndev,
+					struct can_berr_counter *bec)
+{
+	struct xcan_priv *priv = netdev_priv(ndev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->can_clk);
+	if (ret)
+		goto err;
+
+	ret = clk_prepare_enable(priv->bus_clk);
+	if (ret)
+		goto err_clk;
+
+	bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
+	bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
+			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
+
+	clk_disable_unprepare(priv->bus_clk);
+	clk_disable_unprepare(priv->can_clk);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(priv->can_clk);
+err:
+	return ret;
+}
+
+
+static const struct net_device_ops xcan_netdev_ops = {
+	.ndo_open	= xcan_open,
+	.ndo_stop	= xcan_close,
+	.ndo_start_xmit	= xcan_start_xmit,
+};
+
+/**
+ * xcan_suspend - Suspend method for the driver
+ * @dev:	Address of the platform_device structure
+ *
+ * Put the driver into low power mode.
+ * Return: 0 always
+ */
+static int __maybe_unused xcan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = dev_get_drvdata(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct xcan_priv *priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+
+	priv->write_reg(priv, XCAN_MSR_OFFSET, XCAN_MSR_SLEEP_MASK);
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	clk_disable(priv->bus_clk);
+	clk_disable(priv->can_clk);
+
+	return 0;
+}
+
+/**
+ * xcan_resume - Resume from suspend
+ * @dev:	Address of the platformdevice structure
+ *
+ * Resume operation after suspend.
+ * Return: 0 on success and failure value on error
+ */
+static int __maybe_unused xcan_resume(struct device *dev)
+{
+	struct platform_device *pdev = dev_get_drvdata(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct xcan_priv *priv = netdev_priv(ndev);
+	int ret;
+
+	ret = clk_enable(priv->bus_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		return ret;
+	}
+	ret = clk_enable(priv->can_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable clock.\n");
+		clk_disable_unprepare(priv->bus_clk);
+		return ret;
+	}
+
+	priv->write_reg(priv, XCAN_MSR_OFFSET, 0);
+	priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(xcan_dev_pm_ops, xcan_suspend, xcan_resume);
+
+/**
+ * xcan_probe - Platform registration call
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the CAN
+ * device.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_probe(struct platform_device *pdev)
+{
+	struct resource *res; /* IO mem resources */
+	struct net_device *ndev;
+	struct xcan_priv *priv;
+	void __iomem *addr;
+	int ret, rx_max, tx_max;
+
+	/* Get the virtual base address for the device */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(addr)) {
+		ret = PTR_ERR(addr);
+		goto err;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", &tx_max);
+	if (ret < 0)
+		goto err;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth", &rx_max);
+	if (ret < 0)
+		goto err;
+
+	/* Create a CAN device instance */
+	ndev = alloc_candev(sizeof(struct xcan_priv), tx_max);
+	if (!ndev)
+		return -ENOMEM;
+
+	priv = netdev_priv(ndev);
+	priv->dev = ndev;
+	priv->can.bittiming_const = &xcan_bittiming_const;
+	priv->can.do_set_mode = xcan_do_set_mode;
+	priv->can.do_get_berr_counter = xcan_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+					CAN_CTRLMODE_BERR_REPORTING;
+	priv->reg_base = addr;
+	priv->tx_max = tx_max;
+
+	/* Get IRQ for the device */
+	ndev->irq = platform_get_irq(pdev, 0);
+	ndev->flags |= IFF_ECHO;	/* We support local echo */
+
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	ndev->netdev_ops = &xcan_netdev_ops;
+
+	/* Getting the CAN can_clk info */
+	priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
+	if (IS_ERR(priv->can_clk)) {
+		dev_err(&pdev->dev, "Device clock not found.\n");
+		ret = PTR_ERR(priv->can_clk);
+		goto err_free;
+	}
+	/* Check for type of CAN device */
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "xlnx,zynq-can-1.0")) {
+		priv->bus_clk = devm_clk_get(&pdev->dev, "pclk");
+		if (IS_ERR(priv->bus_clk)) {
+			dev_err(&pdev->dev, "bus clock not found\n");
+			ret = PTR_ERR(priv->bus_clk);
+			goto err_free;
+		}
+	} else {
+		priv->bus_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+		if (IS_ERR(priv->bus_clk)) {
+			dev_err(&pdev->dev, "bus clock not found\n");
+			ret = PTR_ERR(priv->bus_clk);
+			goto err_free;
+		}
+	}
+
+	ret = clk_prepare_enable(priv->can_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable device clock\n");
+		goto err_free;
+	}
+
+	ret = clk_prepare_enable(priv->bus_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable bus clock\n");
+		goto err_unprepare_disable_dev;
+	}
+
+	priv->write_reg = xcan_write_reg_le;
+	priv->read_reg = xcan_read_reg_le;
+
+	if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) {
+		priv->write_reg = xcan_write_reg_be;
+		priv->read_reg = xcan_read_reg_be;
+	}
+
+	priv->can.clock.freq = clk_get_rate(priv->can_clk);
+
+	netif_napi_add(ndev, &priv->napi, xcan_rx_poll, rx_max);
+
+	ret = register_candev(ndev);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret);
+		goto err_unprepare_disable_busclk;
+	}
+
+	devm_can_led_init(ndev);
+	clk_disable_unprepare(priv->bus_clk);
+	clk_disable_unprepare(priv->can_clk);
+	netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth:%d\n",
+			priv->reg_base, ndev->irq, priv->can.clock.freq,
+			priv->tx_max);
+
+	return 0;
+
+err_unprepare_disable_busclk:
+	clk_disable_unprepare(priv->bus_clk);
+err_unprepare_disable_dev:
+	clk_disable_unprepare(priv->can_clk);
+err_free:
+	free_candev(ndev);
+err:
+	return ret;
+}
+
+/**
+ * xcan_remove - Unregister the device after releasing the resources
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ * Return: 0 always
+ */
+static int xcan_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct xcan_priv *priv = netdev_priv(ndev);
+
+	if (set_reset_mode(ndev) < 0)
+		netdev_err(ndev, "mode resetting failed!\n");
+
+	unregister_candev(ndev);
+	netif_napi_del(&priv->napi);
+	free_candev(ndev);
+
+	return 0;
+}
+
+/* Match table for OF platform binding */
+static struct of_device_id xcan_of_match[] = {
+	{ .compatible = "xlnx,zynq-can-1.0", },
+	{ .compatible = "xlnx,axi-can-1.00.a", },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xcan_of_match);
+
+static struct platform_driver xcan_driver = {
+	.probe = xcan_probe,
+	.remove	= xcan_remove,
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name = DRIVER_NAME,
+		.pm = &xcan_dev_pm_ops,
+		.of_match_table	= xcan_of_match,
+	},
+};
+
+module_platform_driver(xcan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Xilinx CAN interface");