UBI: Unsorted Block Images

UBI (Latin: "where?") manages multiple logical volumes on a single
flash device, specifically supporting NAND flash devices. UBI provides
a flexible partitioning concept which still allows for wear-levelling
across the whole flash device.

In a sense, UBI may be compared to the Logical Volume Manager
(LVM). Whereas LVM maps logical sector numbers to physical HDD sector
numbers, UBI maps logical eraseblocks to physical eraseblocks.

More information may be found at
http://www.linux-mtd.infradead.org/doc/ubi.html

Partitioning/Re-partitioning

  An UBI volume occupies a certain number of erase blocks. This is
  limited by a configured maximum volume size, which could also be
  viewed as the partition size. Each individual UBI volume's size can
  be changed independently of the other UBI volumes, provided that the
  sum of all volume sizes doesn't exceed a certain limit.

  UBI supports dynamic volumes and static volumes. Static volumes are
  read-only and their contents are protected by CRC check sums.

Bad eraseblocks handling

  UBI transparently handles bad eraseblocks. When a physical
  eraseblock becomes bad, it is substituted by a good physical
  eraseblock, and the user does not even notice this.

Scrubbing

  On a NAND flash bit flips can occur on any write operation,
  sometimes also on read. If bit flips persist on the device, at first
  they can still be corrected by ECC, but once they accumulate,
  correction will become impossible. Thus it is best to actively scrub
  the affected eraseblock, by first copying it to a free eraseblock
  and then erasing the original. The UBI layer performs this type of
  scrubbing under the covers, transparently to the UBI volume users.

Erase Counts

  UBI maintains an erase count header per eraseblock. This frees
  higher-level layers (like file systems) from doing this and allows
  for centralized erase count management instead. The erase counts are
  used by the wear-levelling algorithm in the UBI layer. The algorithm
  itself is exchangeable.

Booting from NAND

  For booting directly from NAND flash the hardware must at least be
  capable of fetching and executing a small portion of the NAND
  flash. Some NAND flash controllers have this kind of support. They
  usually limit the window to a few kilobytes in erase block 0. This
  "initial program loader" (IPL) must then contain sufficient logic to
  load and execute the next boot phase.

  Due to bad eraseblocks, which may be randomly scattered over the
  flash device, it is problematic to store the "secondary program
  loader" (SPL) statically. Also, due to bit-flips it may become
  corrupted over time. UBI allows to solve this problem gracefully by
  storing the SPL in a small static UBI volume.

UBI volumes vs. static partitions

  UBI volumes are still very similar to static MTD partitions:

    * both consist of eraseblocks (logical eraseblocks in case of UBI
      volumes, and physical eraseblocks in case of static partitions;
    * both support three basic operations - read, write, erase.

  But UBI volumes have the following advantages over traditional
  static MTD partitions:

    * there are no eraseblock wear-leveling constraints in case of UBI
      volumes, so the user should not care about this;
    * there are no bit-flips and bad eraseblocks in case of UBI volumes.

  So, UBI volumes may be considered as flash devices with relaxed
  restrictions.

Where can it be found?

  Documentation, kernel code and applications can be found in the MTD
  gits.

What are the applications for?

  The applications help to create binary flash images for two purposes: pfi
  files (partial flash images) for in-system update of UBI volumes, and plain
  binary images, with or without OOB data in case of NAND, for a manufacturing
  step. Furthermore some tools are/and will be created that allow flash content
  analysis after a system has crashed..

Who did UBI?

  The original ideas, where UBI is based on, were developed by Andreas
  Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and some others
  were involved too. The implementation of the kernel layer was done by Artem
  B. Bityutskiy. The user-space applications and tools were written by Oliver
  Lohmann with contributions from Frank Haverkamp, Andreas Arnez, and Artem.
  Joern Engel contributed a patch which modifies JFFS2 so that it can be run on
  a UBI volume. Thomas Gleixner did modifications to the NAND layer. Alexander
  Schmidt made some testing work as well as core functionality improvements.

Signed-off-by: Artem B. Bityutskiy <dedekind@linutronix.de>
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>

1 files changed, 722 insertions, 0 deletions

diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
new file mode 100644
index 000000000000..6612eb79bf17
--- /dev/null
+++ b/drivers/mtd/ubi/cdev.c
@@ -0,0 +1,722 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * This file includes implementation of UBI character device operations.
+ *
+ * There are two kinds of character devices in UBI: UBI character devices and
+ * UBI volume character devices. UBI character devices allow users to
+ * manipulate whole volumes: create, remove, and re-size them. Volume character
+ * devices provide volume I/O capabilities.
+ *
+ * Major and minor numbers are assigned dynamically to both UBI and volume
+ * character devices.
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/ioctl.h>
+#include <linux/capability.h>
+#include <mtd/ubi-user.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+#include "ubi.h"
+
+/*
+ * Maximum sequence numbers of UBI and volume character device IOCTLs (direct
+ * logical eraseblock erase is a debug-only feature).
+ */
+#define UBI_CDEV_IOC_MAX_SEQ 2
+#ifndef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+#define VOL_CDEV_IOC_MAX_SEQ 1
+#else
+#define VOL_CDEV_IOC_MAX_SEQ 2
+#endif
+
+/**
+ * major_to_device - get UBI device object by character device major number.
+ * @major: major number
+ *
+ * This function returns a pointer to the UBI device object.
+ */
+static struct ubi_device *major_to_device(int major)
+{
+	int i;
+
+	for (i = 0; i < ubi_devices_cnt; i++)
+		if (ubi_devices[i] && ubi_devices[i]->major == major)
+			return ubi_devices[i];
+	BUG();
+}
+
+/**
+ * get_exclusive - get exclusive access to an UBI volume.
+ * @desc: volume descriptor
+ *
+ * This function changes UBI volume open mode to "exclusive". Returns previous
+ * mode value (positive integer) in case of success and a negative error code
+ * in case of failure.
+ */
+static int get_exclusive(struct ubi_volume_desc *desc)
+{
+	int users, err;
+	struct ubi_volume *vol = desc->vol;
+
+	spin_lock(&vol->ubi->volumes_lock);
+	users = vol->readers + vol->writers + vol->exclusive;
+	ubi_assert(users > 0);
+	if (users > 1) {
+		dbg_err("%d users for volume %d", users, vol->vol_id);
+		err = -EBUSY;
+	} else {
+		vol->readers = vol->writers = 0;
+		vol->exclusive = 1;
+		err = desc->mode;
+		desc->mode = UBI_EXCLUSIVE;
+	}
+	spin_unlock(&vol->ubi->volumes_lock);
+
+	return err;
+}
+
+/**
+ * revoke_exclusive - revoke exclusive mode.
+ * @desc: volume descriptor
+ * @mode: new mode to switch to
+ */
+static void revoke_exclusive(struct ubi_volume_desc *desc, int mode)
+{
+	struct ubi_volume *vol = desc->vol;
+
+	spin_lock(&vol->ubi->volumes_lock);
+	ubi_assert(vol->readers == 0 && vol->writers == 0);
+	ubi_assert(vol->exclusive == 1 && desc->mode == UBI_EXCLUSIVE);
+	vol->exclusive = 0;
+	if (mode == UBI_READONLY)
+		vol->readers = 1;
+	else if (mode == UBI_READWRITE)
+		vol->writers = 1;
+	else
+		vol->exclusive = 1;
+	spin_unlock(&vol->ubi->volumes_lock);
+
+	desc->mode = mode;
+}
+
+static int vol_cdev_open(struct inode *inode, struct file *file)
+{
+	struct ubi_volume_desc *desc;
+	const struct ubi_device *ubi = major_to_device(imajor(inode));
+	int vol_id = iminor(inode) - 1;
+	int mode;
+
+	if (file->f_mode & FMODE_WRITE)
+		mode = UBI_READWRITE;
+	else
+		mode = UBI_READONLY;
+
+	dbg_msg("open volume %d, mode %d", vol_id, mode);
+
+	desc = ubi_open_volume(ubi->ubi_num, vol_id, mode);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	file->private_data = desc;
+	return 0;
+}
+
+static int vol_cdev_release(struct inode *inode, struct file *file)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+
+	dbg_msg("release volume %d, mode %d", vol->vol_id, desc->mode);
+
+	if (vol->updating) {
+		ubi_warn("update of volume %d not finished, volume is damaged",
+			 vol->vol_id);
+		vol->updating = 0;
+		kfree(vol->upd_buf);
+	}
+
+	ubi_close_volume(desc);
+	return 0;
+}
+
+static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	loff_t new_offset;
+
+	if (vol->updating) {
+		 /* Update is in progress, seeking is prohibited */
+		dbg_err("updating");
+		return -EBUSY;
+	}
+
+	switch (origin) {
+	case 0: /* SEEK_SET */
+		new_offset = offset;
+		break;
+	case 1: /* SEEK_CUR */
+		new_offset = file->f_pos + offset;
+		break;
+	case 2: /* SEEK_END */
+		new_offset = vol->used_bytes + offset;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (new_offset < 0 || new_offset > vol->used_bytes) {
+		dbg_err("bad seek %lld", new_offset);
+		return -EINVAL;
+	}
+
+	dbg_msg("seek volume %d, offset %lld, origin %d, new offset %lld",
+		vol->vol_id, offset, origin, new_offset);
+
+	file->f_pos = new_offset;
+	return new_offset;
+}
+
+static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
+			     loff_t *offp)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int err, lnum, off, len,  vol_id = desc->vol->vol_id, tbuf_size;
+	size_t count_save = count;
+	void *tbuf;
+	uint64_t tmp;
+
+	dbg_msg("read %zd bytes from offset %lld of volume %d",
+		count, *offp, vol_id);
+
+	if (vol->updating) {
+		dbg_err("updating");
+		return -EBUSY;
+	}
+	if (vol->upd_marker) {
+		dbg_err("damaged volume, update marker is set");
+		return -EBADF;
+	}
+	if (*offp == vol->used_bytes || count == 0)
+		return 0;
+
+	if (vol->corrupted)
+		dbg_msg("read from corrupted volume %d", vol_id);
+
+	if (*offp + count > vol->used_bytes)
+		count_save = count = vol->used_bytes - *offp;
+
+	tbuf_size = vol->usable_leb_size;
+	if (count < tbuf_size)
+		tbuf_size = ALIGN(count, ubi->min_io_size);
+	tbuf = kmalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	len = count > tbuf_size ? tbuf_size : count;
+
+	tmp = *offp;
+	off = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+
+	do {
+		cond_resched();
+
+		if (off + len >= vol->usable_leb_size)
+			len = vol->usable_leb_size - off;
+
+		err = ubi_eba_read_leb(ubi, vol_id, lnum, tbuf, off, len, 0);
+		if (err)
+			break;
+
+		off += len;
+		if (off == vol->usable_leb_size) {
+			lnum += 1;
+			off -= vol->usable_leb_size;
+		}
+
+		count -= len;
+		*offp += len;
+
+		err = copy_to_user(buf, tbuf, len);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		buf += len;
+		len = count > tbuf_size ? tbuf_size : count;
+	} while (count);
+
+	kfree(tbuf);
+	return err ? err : count_save - count;
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+
+/*
+ * This function allows to directly write to dynamic UBI volumes, without
+ * issuing the volume update operation. Available only as a debugging feature.
+ * Very useful for testing UBI.
+ */
+static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
+				     size_t count, loff_t *offp)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int lnum, off, len, tbuf_size, vol_id = vol->vol_id, err = 0;
+	size_t count_save = count;
+	char *tbuf;
+	uint64_t tmp;
+
+	dbg_msg("requested: write %zd bytes to offset %lld of volume %u",
+		count, *offp, desc->vol->vol_id);
+
+	if (vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	tmp = *offp;
+	off = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+
+	if (off % ubi->min_io_size) {
+		dbg_err("unaligned position");
+		return -EINVAL;
+	}
+
+	if (*offp + count > vol->used_bytes)
+		count_save = count = vol->used_bytes - *offp;
+
+	/* We can write only in fractions of the minimum I/O unit */
+	if (count % ubi->min_io_size) {
+		dbg_err("unaligned write length");
+		return -EINVAL;
+	}
+
+	tbuf_size = vol->usable_leb_size;
+	if (count < tbuf_size)
+		tbuf_size = ALIGN(count, ubi->min_io_size);
+	tbuf = kmalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	len = count > tbuf_size ? tbuf_size : count;
+
+	while (count) {
+		cond_resched();
+
+		if (off + len >= vol->usable_leb_size)
+			len = vol->usable_leb_size - off;
+
+		err = copy_from_user(tbuf, buf, len);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = ubi_eba_write_leb(ubi, vol_id, lnum, tbuf, off, len,
+					UBI_UNKNOWN);
+		if (err)
+			break;
+
+		off += len;
+		if (off == vol->usable_leb_size) {
+			lnum += 1;
+			off -= vol->usable_leb_size;
+		}
+
+		count -= len;
+		*offp += len;
+		buf += len;
+		len = count > tbuf_size ? tbuf_size : count;
+	}
+
+	kfree(tbuf);
+	return err ? err : count_save - count;
+}
+
+#else
+#define vol_cdev_direct_write(file, buf, count, offp) -EPERM
+#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
+
+static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
+			      size_t count, loff_t *offp)
+{
+	int err = 0;
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+
+	if (!vol->updating)
+		return vol_cdev_direct_write(file, buf, count, offp);
+
+	err = ubi_more_update_data(ubi, vol->vol_id, buf, count);
+	if (err < 0) {
+		ubi_err("cannot write %zd bytes of update data", count);
+		return err;
+	}
+
+	if (err) {
+		/*
+		 * Update is finished, @err contains number of actually written
+		 * bytes now.
+		 */
+		count = err;
+
+		err = ubi_check_volume(ubi, vol->vol_id);
+		if (err < 0)
+			return err;
+
+		if (err) {
+			ubi_warn("volume %d on UBI device %d is corrupted",
+				 vol->vol_id, ubi->ubi_num);
+			vol->corrupted = 1;
+		}
+		vol->checked = 1;
+		revoke_exclusive(desc, UBI_READWRITE);
+	}
+
+	*offp += count;
+	return count;
+}
+
+static int vol_cdev_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	void __user *argp = (void __user *)arg;
+
+	if (_IOC_NR(cmd) > VOL_CDEV_IOC_MAX_SEQ ||
+	    _IOC_TYPE(cmd) != UBI_VOL_IOC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_DIR(cmd) && _IOC_READ)
+		err = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
+	else if (_IOC_DIR(cmd) && _IOC_WRITE)
+		err = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+	if (err)
+		return -EFAULT;
+
+	switch (cmd) {
+
+	/* Volume update command */
+	case UBI_IOCVOLUP:
+	{
+		int64_t bytes, rsvd_bytes;
+
+		if (!capable(CAP_SYS_RESOURCE)) {
+			err = -EPERM;
+			break;
+		}
+
+		err = copy_from_user(&bytes, argp, sizeof(int64_t));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (desc->mode == UBI_READONLY) {
+			err = -EROFS;
+			break;
+		}
+
+		rsvd_bytes = vol->reserved_pebs * (ubi->leb_size-vol->data_pad);
+		if (bytes < 0 || bytes > rsvd_bytes) {
+			err = -EINVAL;
+			break;
+		}
+
+		err = get_exclusive(desc);
+		if (err < 0)
+			break;
+
+		err = ubi_start_update(ubi, vol->vol_id, bytes);
+		if (bytes == 0)
+			revoke_exclusive(desc, UBI_READWRITE);
+
+		file->f_pos = 0;
+		break;
+	}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+	/* Logical eraseblock erasure command */
+	case UBI_IOCEBER:
+	{
+		int32_t lnum;
+
+		err = __get_user(lnum, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (desc->mode == UBI_READONLY) {
+			err = -EROFS;
+			break;
+		}
+
+		if (lnum < 0 || lnum >= vol->reserved_pebs) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (vol->vol_type != UBI_DYNAMIC_VOLUME) {
+			err = -EROFS;
+			break;
+		}
+
+		dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+		err = ubi_eba_unmap_leb(ubi, vol->vol_id, lnum);
+		if (err)
+			break;
+
+		err = ubi_wl_flush(ubi);
+		break;
+	}
+#endif
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
+/**
+ * verify_mkvol_req - verify volume creation request.
+ * @ubi: UBI device description object
+ * @req: the request to check
+ *
+ * This function zero if the request is correct, and %-EINVAL if not.
+ */
+static int verify_mkvol_req(const struct ubi_device *ubi,
+			    const struct ubi_mkvol_req *req)
+{
+	int n, err = -EINVAL;
+
+	if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
+	    req->name_len < 0)
+		goto bad;
+
+	if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
+	    req->vol_id != UBI_VOL_NUM_AUTO)
+		goto bad;
+
+	if (req->alignment == 0)
+		goto bad;
+
+	if (req->bytes == 0)
+		goto bad;
+
+	if (req->vol_type != UBI_DYNAMIC_VOLUME &&
+	    req->vol_type != UBI_STATIC_VOLUME)
+		goto bad;
+
+	if (req->alignment > ubi->leb_size)
+		goto bad;
+
+	n = req->alignment % ubi->min_io_size;
+	if (req->alignment != 1 && n)
+		goto bad;
+
+	if (req->name_len > UBI_VOL_NAME_MAX) {
+		err = -ENAMETOOLONG;
+		goto bad;
+	}
+
+	return 0;
+
+bad:
+	dbg_err("bad volume creation request");
+	ubi_dbg_dump_mkvol_req(req);
+	return err;
+}
+
+/**
+ * verify_rsvol_req - verify volume re-size request.
+ * @ubi: UBI device description object
+ * @req: the request to check
+ *
+ * This function returns zero if the request is correct, and %-EINVAL if not.
+ */
+static int verify_rsvol_req(const struct ubi_device *ubi,
+			    const struct ubi_rsvol_req *req)
+{
+	if (req->bytes <= 0)
+		return -EINVAL;
+
+	if (req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct ubi_device *ubi;
+	struct ubi_volume_desc *desc;
+	void __user *argp = (void __user *)arg;
+
+	if (_IOC_NR(cmd) > UBI_CDEV_IOC_MAX_SEQ ||
+	    _IOC_TYPE(cmd) != UBI_IOC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_DIR(cmd) && _IOC_READ)
+		err = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
+	else if (_IOC_DIR(cmd) && _IOC_WRITE)
+		err = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+	if (err)
+		return -EFAULT;
+
+	if (!capable(CAP_SYS_RESOURCE))
+		return -EPERM;
+
+	ubi = major_to_device(imajor(inode));
+	if (IS_ERR(ubi))
+		return PTR_ERR(ubi);
+
+	switch (cmd) {
+	/* Create volume command */
+	case UBI_IOCMKVOL:
+	{
+		struct ubi_mkvol_req req;
+
+		dbg_msg("create volume");
+		err = __copy_from_user(&req, argp,
+				       sizeof(struct ubi_mkvol_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = verify_mkvol_req(ubi, &req);
+		if (err)
+			break;
+
+		req.name[req.name_len] = '\0';
+
+		err = ubi_create_volume(ubi, &req);
+		if (err)
+			break;
+
+		err = __put_user(req.vol_id, (__user int32_t *)argp);
+		if (err)
+			err = -EFAULT;
+
+		break;
+	}
+
+	/* Remove volume command */
+	case UBI_IOCRMVOL:
+	{
+		int vol_id;
+
+		dbg_msg("remove volume");
+		err = __get_user(vol_id, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			break;
+		}
+
+		err = ubi_remove_volume(desc);
+		if (err)
+			ubi_close_volume(desc);
+
+		break;
+	}
+
+	/* Re-size volume command */
+	case UBI_IOCRSVOL:
+	{
+		int pebs;
+		uint64_t tmp;
+		struct ubi_rsvol_req req;
+
+		dbg_msg("re-size volume");
+		err = __copy_from_user(&req, argp,
+				       sizeof(struct ubi_rsvol_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = verify_rsvol_req(ubi, &req);
+		if (err)
+			break;
+
+		desc = ubi_open_volume(ubi->ubi_num, req.vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			break;
+		}
+
+		tmp = req.bytes;
+		pebs = !!do_div(tmp, desc->vol->usable_leb_size);
+		pebs += tmp;
+
+		err = ubi_resize_volume(desc, pebs);
+		ubi_close_volume(desc);
+		break;
+	}
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
+/* UBI character device operations */
+struct file_operations ubi_cdev_operations = {
+	.owner = THIS_MODULE,
+	.ioctl = ubi_cdev_ioctl,
+	.llseek = no_llseek
+};
+
+/* UBI volume character device operations */
+struct file_operations ubi_vol_cdev_operations = {
+	.owner   = THIS_MODULE,
+	.open    = vol_cdev_open,
+	.release = vol_cdev_release,
+	.llseek  = vol_cdev_llseek,
+	.read    = vol_cdev_read,
+	.write   = vol_cdev_write,
+	.ioctl   = vol_cdev_ioctl
+};