media: adv7842: support EDIDs up to 4 blocks

The adv7842 driver didn't support EDIDs of 3 or 4 blocks, even though the
hardware supports this.

It is a bit more complicated due to the fact that the adv7842 can expose
two EDIDs: one digital, one analog, for DVI-I connectors. In that case the
VGA_EDID_ENABLE bit is set and blocks 0 and 1 of the EDID eeprom are used
for the DVI-D part and block 2 is used for the DVI-A part of the DVI-I
connector.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

1 files changed, 27 insertions, 10 deletions

diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index ff10af757b99..78e61fe6f2f0 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -98,12 +98,12 @@ struct adv7842_state {
 
 	v4l2_std_id norm;
 	struct {
-		u8 edid[256];
+		u8 edid[512];
 		u32 blocks;
 		u32 present;
 	} hdmi_edid;
 	struct {
-		u8 edid[256];
+		u8 edid[128];
 		u32 blocks;
 		u32 present;
 	} vga_edid;
@@ -720,6 +720,9 @@ static int edid_write_vga_segment(struct v4l2_subdev *sd)
 
 	v4l2_dbg(2, debug, sd, "%s: write EDID on VGA port\n", __func__);
 
+	if (!state->vga_edid.present)
+		return 0;
+
 	/* HPA disable on port A and B */
 	io_write_and_or(sd, 0x20, 0xcf, 0x00);
 
@@ -763,7 +766,7 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
 	struct adv7842_state *state = to_state(sd);
 	const u8 *edid = state->hdmi_edid.edid;
 	u32 blocks = state->hdmi_edid.blocks;
-	int spa_loc;
+	unsigned int spa_loc;
 	u16 pa, parent_pa;
 	int err = 0;
 	int i;
@@ -796,12 +799,14 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
 		pa = (edid[spa_loc] << 8) | edid[spa_loc + 1];
 	}
 
-	/* edid segment pointer '0' for HDMI ports */
-	rep_write_and_or(sd, 0x77, 0xef, 0x00);
 
-	for (i = 0; !err && i < blocks * 128; i += I2C_SMBUS_BLOCK_MAX)
+	for (i = 0; !err && i < blocks * 128; i += I2C_SMBUS_BLOCK_MAX) {
+		/* set edid segment pointer for HDMI ports */
+		if (i % 256 == 0)
+			rep_write_and_or(sd, 0x77, 0xef, i >= 256 ? 0x10 : 0x00);
 		err = i2c_smbus_write_i2c_block_data(state->i2c_edid, i,
 						     I2C_SMBUS_BLOCK_MAX, edid + i);
+	}
 	if (err)
 		return err;
 
@@ -2491,9 +2496,17 @@ static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
 	return 0;
 }
 
+/*
+ * If the VGA_EDID_ENABLE bit is set (Repeater Map 0x7f, bit 7), then
+ * the first two blocks of the EDID are for the HDMI, and the first block
+ * of segment 1 (i.e. the third block of the EDID) is for VGA.
+ * So if a VGA EDID is installed, then the maximum size of the HDMI EDID
+ * is 2 blocks.
+ */
 static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
 {
 	struct adv7842_state *state = to_state(sd);
+	unsigned int max_blocks = e->pad == ADV7842_EDID_PORT_VGA ? 1 : 4;
 	int err = 0;
 
 	memset(e->reserved, 0, sizeof(e->reserved));
@@ -2502,8 +2515,12 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
 		return -EINVAL;
 	if (e->start_block != 0)
 		return -EINVAL;
-	if (e->blocks > 2) {
-		e->blocks = 2;
+	if (e->pad < ADV7842_EDID_PORT_VGA && state->vga_edid.blocks)
+		max_blocks = 2;
+	if (e->pad == ADV7842_EDID_PORT_VGA && state->hdmi_edid.blocks > 2)
+		return -EBUSY;
+	if (e->blocks > max_blocks) {
+		e->blocks = max_blocks;
 		return -E2BIG;
 	}
 
@@ -2514,7 +2531,7 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
 
 	switch (e->pad) {
 	case ADV7842_EDID_PORT_VGA:
-		memset(&state->vga_edid.edid, 0, 256);
+		memset(&state->vga_edid.edid, 0, sizeof(state->vga_edid.edid));
 		state->vga_edid.blocks = e->blocks;
 		state->vga_edid.present = e->blocks ? 0x1 : 0x0;
 		if (e->blocks)
@@ -2523,7 +2540,7 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
 		break;
 	case ADV7842_EDID_PORT_A:
 	case ADV7842_EDID_PORT_B:
-		memset(&state->hdmi_edid.edid, 0, 256);
+		memset(&state->hdmi_edid.edid, 0, sizeof(state->hdmi_edid.edid));
 		state->hdmi_edid.blocks = e->blocks;
 		if (e->blocks) {
 			state->hdmi_edid.present |= 0x04 << e->pad;