Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...

1 files changed, 19 insertions, 15 deletions

diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index 3317a9ae3961..d98ca3aebe23 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -172,28 +172,28 @@ static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
 static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
 {
 	struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
+	int rval = -EINVAL;
 
 	mutex_lock(&flash->lock);
 
 	if (ctrl->id == V4L2_CID_FLASH_FAULT) {
-		int rval;
 		s32 fault = 0;
 		unsigned int reg_val;
 		rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
 		if (rval < 0)
-			return rval;
-		if (rval & FAULT_SHORT_CIRCUIT)
+			goto out;
+		if (reg_val & FAULT_SHORT_CIRCUIT)
 			fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
-		if (rval & FAULT_OVERTEMP)
+		if (reg_val & FAULT_OVERTEMP)
 			fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
-		if (rval & FAULT_TIMEOUT)
+		if (reg_val & FAULT_TIMEOUT)
 			fault |= V4L2_FLASH_FAULT_TIMEOUT;
 		ctrl->cur.val = fault;
-		return 0;
 	}
 
+out:
 	mutex_unlock(&flash->lock);
-	return -EINVAL;
+	return rval;
 }
 
 static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
@@ -219,15 +219,19 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
 		break;
 
 	case V4L2_CID_FLASH_STROBE:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
+		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+			rval = -EBUSY;
+			goto err_out;
+		}
 		flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
 		rval = lm3560_mode_ctrl(flash);
 		break;
 
 	case V4L2_CID_FLASH_STROBE_STOP:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
+		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+			rval = -EBUSY;
+			goto err_out;
+		}
 		flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 		rval = lm3560_mode_ctrl(flash);
 		break;
@@ -247,8 +251,8 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
 		break;
 	}
 
-	mutex_unlock(&flash->lock);
 err_out:
+	mutex_unlock(&flash->lock);
 	return rval;
 }
 
@@ -444,14 +448,14 @@ static int lm3560_probe(struct i2c_client *client,
 	if (rval < 0)
 		return rval;
 
+	i2c_set_clientdata(client, flash);
+
 	return 0;
 }
 
 static int lm3560_remove(struct i2c_client *client)
 {
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct lm3560_flash *flash = container_of(subdev, struct lm3560_flash,
-						  subdev_led[LM3560_LED_MAX]);
+	struct lm3560_flash *flash = i2c_get_clientdata(client);
 	unsigned int i;
 
 	for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) {