Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

14 files changed, 1658 insertions, 89 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6261fd6d7c3c..547f67d65372 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -140,6 +140,19 @@ config TOUCHSCREEN_BU21013
 	  To compile this driver as a module, choose M here: the
 	  module will be called bu21013_ts.
 
+config TOUCHSCREEN_CHIPONE_ICN8318
+	tristate "chipone icn8318 touchscreen controller"
+	depends on GPIOLIB
+	depends on I2C
+	depends on OF
+	help
+	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8318.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
@@ -297,11 +310,12 @@ config TOUCHSCREEN_FUJITSU
 
 config TOUCHSCREEN_GOODIX
 	tristate "Goodix I2C touchscreen"
-	depends on I2C && ACPI
+	depends on I2C
 	help
 	  Say Y here if you have the Goodix touchscreen (such as one
 	  installed in Onda v975w tablets) connected to your
-	  system.
+	  system. It also supports 5-finger chip models, which can be
+	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 
 	  If unsure, say N.
 
@@ -323,6 +337,18 @@ config TOUCHSCREEN_ILI210X
 	  To compile this driver as a module, choose M here: the
 	  module will be called ili210x.
 
+config TOUCHSCREEN_IPROC
+	tristate "IPROC touch panel driver support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Say Y here if you want to add support for the IPROC touch
+	  controller to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm_iproc_tsc.
+
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
 	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
@@ -962,6 +988,17 @@ config TOUCHSCREEN_SUR40
 	  To compile this driver as a module, choose M here: the
 	  module will be called sur40.
 
+config TOUCHSCREEN_SX8654
+	tristate "Semtech SX8654 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx8654.
+
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 0242fea2102a..44deea743d02 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC)		+= bcm_iproc_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
@@ -79,5 +81,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
 obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index ba30578e296e..f0b954d46a25 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -157,7 +157,7 @@ static const struct i2c_device_id ar1021_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
 
-static struct of_device_id ar1021_i2c_of_match[] = {
+static const struct of_device_id ar1021_i2c_of_match[] = {
 	{ .compatible = "microchip,ar1021-i2c", },
 	{ }
 };
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 95ee92a91bd2..2875ddf37289 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 
 /* Version */
 #define MXT_VER_20		20
@@ -79,6 +80,7 @@
 #define MXT_SPT_DIGITIZER_T43		43
 #define MXT_SPT_MESSAGECOUNT_T44	44
 #define MXT_SPT_CTECONFIG_T46		46
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
 
 /* MXT_GEN_MESSAGE_T5 object */
 #define MXT_RPTID_NOMSG		0xff
@@ -185,6 +187,36 @@ struct t9_range {
 #define MXT_RESET_VALUE		0x01
 #define MXT_BACKUP_VALUE	0x55
 
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL		0
+#define MXT_T100_CFG1		1
+#define MXT_T100_TCHAUX		3
+#define MXT_T100_XRANGE		13
+#define MXT_T100_YRANGE		24
+
+#define MXT_T100_CFG_SWITCHXY	BIT(5)
+
+#define MXT_T100_TCHAUX_VECT	BIT(0)
+#define MXT_T100_TCHAUX_AMPL	BIT(1)
+#define MXT_T100_TCHAUX_AREA	BIT(2)
+
+#define MXT_T100_DETECT		BIT(7)
+#define MXT_T100_TYPE_MASK	0x70
+
+enum t100_type {
+	MXT_T100_TYPE_FINGER		= 1,
+	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
+	MXT_T100_TYPE_HOVERING_FINGER	= 4,
+	MXT_T100_TYPE_GLOVE		= 5,
+	MXT_T100_TYPE_LARGE_TOUCH	= 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH	0
+#define MXT_DISTANCE_HOVERING		1
+
+#define MXT_TOUCH_MAJOR_DEFAULT		1
+#define MXT_PRESSURE_DEFAULT		1
+
 /* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
@@ -244,6 +276,9 @@ struct mxt_data {
 	unsigned int max_y;
 	bool in_bootloader;
 	u16 mem_size;
+	u8 t100_aux_ampl;
+	u8 t100_aux_area;
+	u8 t100_aux_vect;
 	u8 max_reportid;
 	u32 config_crc;
 	u32 info_crc;
@@ -253,6 +288,7 @@ struct mxt_data {
 	bool update_input;
 	u8 last_message_count;
 	u8 num_touchids;
+	u8 multitouch;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -264,6 +300,8 @@ struct mxt_data {
 	u8 T9_reportid_max;
 	u8 T19_reportid;
 	u16 T44_address;
+	u8 T100_reportid_min;
+	u8 T100_reportid_max;
 
 	/* for fw update in bootloader */
 	struct completion bl_completion;
@@ -771,6 +809,114 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 	data->update_input = true;
 }
 
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	u8 type = 0;
+	u16 x;
+	u16 y;
+	int distance = 0;
+	int tool = 0;
+	u8 major = 0;
+	u8 pressure = 0;
+	u8 orientation = 0;
+
+	id = message[0] - data->T100_reportid_min - 2;
+
+	/* ignore SCRSTATUS events */
+	if (id < 0)
+		return;
+
+	status = message[1];
+	x = get_unaligned_le16(&message[2]);
+	y = get_unaligned_le16(&message[4]);
+
+	if (status & MXT_T100_DETECT) {
+		type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+		switch (type) {
+		case MXT_T100_TYPE_HOVERING_FINGER:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_HOVERING;
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_FINGER:
+		case MXT_T100_TYPE_GLOVE:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+			if (data->t100_aux_area)
+				major = message[data->t100_aux_area];
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_PASSIVE_STYLUS:
+			tool = MT_TOOL_PEN;
+
+			/*
+			 * Passive stylus is reported with size zero so
+			 * hardcode.
+			 */
+			major = MXT_TOUCH_MAJOR_DEFAULT;
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			break;
+
+		case MXT_T100_TYPE_LARGE_TOUCH:
+			/* Ignore suppressed touch */
+			break;
+
+		default:
+			dev_dbg(dev, "Unexpected T100 type\n");
+			return;
+		}
+	}
+
+	/*
+	 * Values reported should be non-zero if tool is touching the
+	 * device
+	 */
+	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+		pressure = MXT_PRESSURE_DEFAULT;
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T100_DETECT) {
+		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+			id, type, x, y, major, pressure, orientation);
+
+		input_mt_report_slot_state(input_dev, tool, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+	} else {
+		dev_dbg(dev, "[%u] release\n", id);
+
+		/* close out slot */
+		input_mt_report_slot_state(input_dev, 0, 0);
+	}
+
+	data->update_input = true;
+}
+
 static int mxt_proc_message(struct mxt_data *data, u8 *message)
 {
 	u8 report_id = message[0];
@@ -786,9 +932,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
 		 * is not yet registered.
 		 */
 		mxt_dump_message(data, message);
-	} else if (report_id >= data->T9_reportid_min
-	    && report_id <= data->T9_reportid_max) {
+	} else if (report_id >= data->T9_reportid_min &&
+		   report_id <= data->T9_reportid_max) {
 		mxt_proc_t9_message(data, message);
+	} else if (report_id >= data->T100_reportid_min &&
+		   report_id <= data->T100_reportid_max) {
+		mxt_proc_t100_message(data, message);
 	} else if (report_id == data->T19_reportid) {
 		mxt_input_button(data, message);
 		data->update_input = true;
@@ -1411,6 +1560,8 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T9_reportid_max = 0;
 	data->T19_reportid = 0;
 	data->T44_address = 0;
+	data->T100_reportid_min = 0;
+	data->T100_reportid_max = 0;
 	data->max_reportid = 0;
 }
 
@@ -1487,6 +1638,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 			data->T7_address = object->start_address;
 			break;
 		case MXT_TOUCH_MULTI_T9:
+			data->multitouch = MXT_TOUCH_MULTI_T9;
 			data->T9_reportid_min = min_id;
 			data->T9_reportid_max = max_id;
 			data->num_touchids = object->num_report_ids
@@ -1498,6 +1650,13 @@ static int mxt_get_object_table(struct mxt_data *data)
 		case MXT_SPT_GPIOPWM_T19:
 			data->T19_reportid = min_id;
 			break;
+		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+			data->T100_reportid_min = min_id;
+			data->T100_reportid_max = max_id;
+			/* first two report IDs reserved */
+			data->num_touchids = object->num_report_ids - 2;
+			break;
 		}
 
 		end_address = object->start_address
@@ -1582,22 +1741,138 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
 	return 0;
 }
 
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct mxt_object *object;
+	u16 range_x, range_y;
+	u8 cfg, tchaux;
+	u8 aux;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XRANGE,
+			       sizeof(range_x), &range_x);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_x);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YRANGE,
+			       sizeof(range_y), &range_y);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_CFG1,
+				1, &cfg);
+	if (error)
+		return error;
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_TCHAUX,
+				1, &tchaux);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range_x == 0)
+		range_x = 1023;
+
+	if (range_y == 0)
+		range_y = 1023;
+
+	if (cfg & MXT_T100_CFG_SWITCHXY) {
+		data->max_x = range_y;
+		data->max_y = range_x;
+	} else {
+		data->max_x = range_x;
+		data->max_y = range_y;
+	}
+
+	/* allocate aux bytes */
+	aux = 6;
+
+	if (tchaux & MXT_T100_TCHAUX_VECT)
+		data->t100_aux_vect = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AMPL)
+		data->t100_aux_ampl = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AREA)
+		data->t100_aux_area = aux++;
+
+	dev_dbg(&client->dev,
+		"T100 aux mappings vect:%u ampl:%u area:%u\n",
+		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+	dev_info(&client->dev,
+		 "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
 static int mxt_input_open(struct input_dev *dev);
 static void mxt_input_close(struct input_dev *dev);
 
-static int mxt_initialize_t9_input_device(struct mxt_data *data)
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+				   struct mxt_data *data)
 {
-	struct device *dev = &data->client->dev;
 	const struct mxt_platform_data *pdata = data->pdata;
+	int i;
+
+	input_dev->name = "Atmel maXTouch Touchpad";
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+			  MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+			  MXT_PIXELS_PER_MM);
+
+	for (i = 0; i < pdata->t19_num_keys; i++)
+		if (pdata->t19_keymap[i] != KEY_RESERVED)
+			input_set_capability(input_dev, EV_KEY,
+					     pdata->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct device *dev = &data->client->dev;
 	struct input_dev *input_dev;
 	int error;
 	unsigned int num_mt_slots;
 	unsigned int mt_flags = 0;
-	int i;
 
-	error = mxt_read_t9_resolution(data);
-	if (error)
-		dev_warn(dev, "Failed to initialize T9 resolution\n");
+	switch (data->multitouch) {
+	case MXT_TOUCH_MULTI_T9:
+		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+		error = mxt_read_t9_resolution(data);
+		if (error)
+			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		break;
+
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+		num_mt_slots = data->num_touchids;
+		error = mxt_read_t100_config(data);
+		if (error)
+			dev_warn(dev, "Failed to read T100 config\n");
+		break;
+
+	default:
+		dev_err(dev, "Invalid multitouch object\n");
+		return -EINVAL;
+	}
 
 	input_dev = input_allocate_device();
 	if (!input_dev) {
@@ -1612,54 +1887,76 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
 	input_dev->open = mxt_input_open;
 	input_dev->close = mxt_input_close;
 
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
 
-	if (pdata->t19_num_keys) {
-		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
 
-		for (i = 0; i < pdata->t19_num_keys; i++)
-			if (pdata->t19_keymap[i] != KEY_RESERVED)
-				input_set_capability(input_dev, EV_KEY,
-						     pdata->t19_keymap[i]);
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+	}
 
+	/* If device has buttons we assume it is a touchpad */
+	if (pdata->t19_num_keys) {
+		mxt_set_up_as_touchpad(input_dev, data);
 		mt_flags |= INPUT_MT_POINTER;
-
-		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
-				  MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
-				  MXT_PIXELS_PER_MM);
-
-		input_dev->name = "Atmel maXTouch Touchpad";
 	}
 
-	/* For single touch */
-	input_set_abs_params(input_dev, ABS_X,
-			     0, data->max_x, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y,
-			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE,
-			     0, 255, 0, 0);
-
 	/* For multi touch */
-	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
 	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
 	if (error) {
 		dev_err(dev, "Error %d initialising slots\n", error);
 		goto err_free_mem;
 	}
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			     0, MXT_MAX_AREA, 0, 0);
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+				     MXT_DISTANCE_ACTIVE_TOUCH,
+				     MXT_DISTANCE_HOVERING,
+				     0, 0);
+	}
+
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 			     0, data->max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
 			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_PRESSURE,
-			     0, 255, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_area)) {
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     0, MXT_MAX_AREA, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_ampl) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
 
 	input_set_drvdata(input_dev, data);
 
@@ -1765,9 +2062,13 @@ static int mxt_configure_objects(struct mxt_data *data,
 			dev_warn(dev, "Error %d updating config\n", error);
 	}
 
-	error = mxt_initialize_t9_input_device(data);
-	if (error)
-		return error;
+	if (data->multitouch) {
+		error = mxt_initialize_input_device(data);
+		if (error)
+			return error;
+	} else {
+		dev_warn(dev, "No touch object detected\n");
+	}
 
 	dev_info(dev,
 		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
@@ -2044,15 +2345,13 @@ static const struct attribute_group mxt_attr_group = {
 static void mxt_start(struct mxt_data *data)
 {
 	/* Touch enable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0x83);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
 	/* Touch disable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0);
 }
 
 static int mxt_input_open(struct input_dev *dev)
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
new file mode 100644
index 000000000000..ae460a5c93d5
--- /dev/null
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -0,0 +1,522 @@
+/*
+* Copyright (C) 2015 Broadcom Corporation
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation version 2.
+*
+* This program is distributed "as is" WITHOUT ANY WARRANTY of any
+* kind, whether express or implied; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/serio.h>
+
+#define IPROC_TS_NAME "iproc-ts"
+
+#define PEN_DOWN_STATUS     1
+#define PEN_UP_STATUS       0
+
+#define X_MIN               0
+#define Y_MIN               0
+#define X_MAX               0xFFF
+#define Y_MAX               0xFFF
+
+/* Value given by controller for invalid coordinate. */
+#define INVALID_COORD       0xFFFFFFFF
+
+/* Register offsets */
+#define REGCTL1             0x00
+#define REGCTL2             0x04
+#define INTERRUPT_THRES     0x08
+#define INTERRUPT_MASK      0x0c
+
+#define INTERRUPT_STATUS    0x10
+#define CONTROLLER_STATUS   0x14
+#define FIFO_DATA           0x18
+#define FIFO_DATA_X_Y_MASK  0xFFFF
+#define ANALOG_CONTROL      0x1c
+
+#define AUX_DATA            0x20
+#define DEBOUNCE_CNTR_STAT  0x24
+#define SCAN_CNTR_STAT      0x28
+#define REM_CNTR_STAT       0x2c
+
+#define SETTLING_TIMER_STAT 0x30
+#define SPARE_REG           0x34
+#define SOFT_BYPASS_CONTROL 0x38
+#define SOFT_BYPASS_DATA    0x3c
+
+
+/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */
+#define TS_PEN_INTR_MASK        BIT(0)
+#define TS_FIFO_INTR_MASK       BIT(2)
+
+/* Bit values for CONTROLLER_STATUS reg1 */
+#define TS_PEN_DOWN             BIT(0)
+
+/* Shift values for control reg1 */
+#define SCANNING_PERIOD_SHIFT   24
+#define DEBOUNCE_TIMEOUT_SHIFT  16
+#define SETTLING_TIMEOUT_SHIFT  8
+#define TOUCH_TIMEOUT_SHIFT     0
+
+/* Shift values for coordinates from fifo */
+#define X_COORD_SHIFT  0
+#define Y_COORD_SHIFT  16
+
+/* Bit values for REGCTL2 */
+#define TS_CONTROLLER_EN_BIT    BIT(16)
+#define TS_CONTROLLER_AVGDATA_SHIFT 8
+#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT)
+#define TS_CONTROLLER_PWR_LDO   BIT(5)
+#define TS_CONTROLLER_PWR_ADC   BIT(4)
+#define TS_CONTROLLER_PWR_BGP   BIT(3)
+#define TS_CONTROLLER_PWR_TS    BIT(2)
+#define TS_WIRE_MODE_BIT        BIT(1)
+
+#define dbg_reg(dev, priv, reg) \
+	dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+
+struct tsc_param {
+	/* Each step is 1024 us.  Valid 1-256 */
+	u32 scanning_period;
+
+	/*  Each step is 512 us.  Valid 0-255 */
+	u32 debounce_timeout;
+
+	/*
+	 * The settling duration (in ms) is the amount of time the tsc
+	 * waits to allow the voltage to settle after turning on the
+	 * drivers in detection mode. Valid values: 0-11
+	 *   0 =  0.008 ms
+	 *   1 =  0.01 ms
+	 *   2 =  0.02 ms
+	 *   3 =  0.04 ms
+	 *   4 =  0.08 ms
+	 *   5 =  0.16 ms
+	 *   6 =  0.32 ms
+	 *   7 =  0.64 ms
+	 *   8 =  1.28 ms
+	 *   9 =  2.56 ms
+	 *   10 = 5.12 ms
+	 *   11 = 10.24 ms
+	 */
+	u32 settling_timeout;
+
+	/* touch timeout in sample counts */
+	u32 touch_timeout;
+
+	/*
+	 * Number of data samples which are averaged before a final data point
+	 * is placed into the FIFO
+	 */
+	u32 average_data;
+
+	/* FIFO threshold */
+	u32 fifo_threshold;
+
+	/* Optional standard touchscreen properties. */
+	u32 max_x;
+	u32 max_y;
+	u32 fuzz_x;
+	u32 fuzz_y;
+	bool invert_x;
+	bool invert_y;
+};
+
+struct iproc_ts_priv {
+	struct platform_device *pdev;
+	struct input_dev *idev;
+
+	void __iomem *regs;
+	struct clk *tsc_clk;
+
+	int  pen_status;
+	struct tsc_param cfg_params;
+};
+
+/*
+ * Set default values the same as hardware reset values
+ * except for fifo_threshold with is set to 1.
+ */
+static const struct tsc_param iproc_default_config = {
+	.scanning_period  = 0x5,  /* 1 to 256 */
+	.debounce_timeout = 0x28, /* 0 to 255 */
+	.settling_timeout = 0x7,  /* 0 to 11 */
+	.touch_timeout    = 0xa,  /* 0 to 255 */
+	.average_data     = 5,    /* entry 5 = 32 pts */
+	.fifo_threshold   = 1,    /* 0 to 31 */
+	.max_x            = X_MAX,
+	.max_y            = Y_MAX,
+};
+
+static void ts_reg_dump(struct iproc_ts_priv *priv)
+{
+	struct device *dev = &priv->pdev->dev;
+
+	dbg_reg(dev, priv, REGCTL1);
+	dbg_reg(dev, priv, REGCTL2);
+	dbg_reg(dev, priv, INTERRUPT_THRES);
+	dbg_reg(dev, priv, INTERRUPT_MASK);
+	dbg_reg(dev, priv, INTERRUPT_STATUS);
+	dbg_reg(dev, priv, CONTROLLER_STATUS);
+	dbg_reg(dev, priv, FIFO_DATA);
+	dbg_reg(dev, priv, ANALOG_CONTROL);
+	dbg_reg(dev, priv, AUX_DATA);
+	dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT);
+	dbg_reg(dev, priv, SCAN_CNTR_STAT);
+	dbg_reg(dev, priv, REM_CNTR_STAT);
+	dbg_reg(dev, priv, SETTLING_TIMER_STAT);
+	dbg_reg(dev, priv, SPARE_REG);
+	dbg_reg(dev, priv, SOFT_BYPASS_CONTROL);
+	dbg_reg(dev, priv, SOFT_BYPASS_DATA);
+}
+
+static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct iproc_ts_priv *priv = platform_get_drvdata(pdev);
+	u32 intr_status;
+	u32 raw_coordinate;
+	u16 x;
+	u16 y;
+	int i;
+	bool needs_sync = false;
+
+	intr_status = readl(priv->regs + INTERRUPT_STATUS);
+	intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	if (intr_status == 0)
+		return IRQ_NONE;
+
+	/* Clear all interrupt status bits, write-1-clear */
+	writel(intr_status, priv->regs + INTERRUPT_STATUS);
+
+	/* Pen up/down */
+	if (intr_status & TS_PEN_INTR_MASK) {
+		if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+			priv->pen_status = PEN_DOWN_STATUS;
+		else
+			priv->pen_status = PEN_UP_STATUS;
+
+		input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+		needs_sync = true;
+
+		dev_dbg(&priv->pdev->dev,
+			"pen up-down (%d)\n", priv->pen_status);
+	}
+
+	/* coordinates in FIFO exceed the theshold */
+	if (intr_status & TS_FIFO_INTR_MASK) {
+		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
+			raw_coordinate = readl(priv->regs + FIFO_DATA);
+			if (raw_coordinate == INVALID_COORD)
+				continue;
+
+			/*
+			 * The x and y coordinate are 16 bits each
+			 * with the x in the lower 16 bits and y in the
+			 * upper 16 bits.
+			 */
+			x = (raw_coordinate >> X_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+			y = (raw_coordinate >> Y_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+
+			/* We only want to retain the 12 msb of the 16 */
+			x = (x >> 4) & 0x0FFF;
+			y = (y >> 4) & 0x0FFF;
+
+			/* adjust x y according to lcd tsc mount angle */
+			if (priv->cfg_params.invert_x)
+				x = priv->cfg_params.max_x - x;
+
+			if (priv->cfg_params.invert_y)
+				y = priv->cfg_params.max_y - y;
+
+			input_report_abs(priv->idev, ABS_X, x);
+			input_report_abs(priv->idev, ABS_Y, y);
+			needs_sync = true;
+
+			dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y);
+		}
+	}
+
+	if (needs_sync)
+		input_sync(priv->idev);
+
+	return IRQ_HANDLED;
+}
+
+static int iproc_ts_start(struct input_dev *idev)
+{
+	struct iproc_ts_priv *priv = input_get_drvdata(idev);
+	u32 val;
+	int error;
+
+	/* Enable clock */
+	error = clk_prepare_enable(priv->tsc_clk);
+	if (error) {
+		dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n",
+			__func__, error);
+		return error;
+	}
+
+	/*
+	 * Interrupt is generated when:
+	 *  FIFO reaches the int_th value, and pen event(up/down)
+	 */
+	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_MASK);
+
+	writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+
+	/* Initialize control reg1 */
+	val = 0;
+	val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT;
+	val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
+	writel(val, priv->regs + REGCTL1);
+
+	/* Try to clear all interrupt status */
+	val = readl(priv->regs + INTERRUPT_STATUS);
+	val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_STATUS);
+
+	/* Initialize control reg2 */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
+
+	val &= ~TS_CONTROLLER_AVGDATA_MASK;
+	val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
+
+	val &= ~(TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
+		   TS_CONTROLLER_PWR_ADC |	/* PWR up ADC */
+		   TS_CONTROLLER_PWR_BGP |	/* PWR up BGP */
+		   TS_CONTROLLER_PWR_TS);	/* PWR up TS */
+
+	writel(val, priv->regs + REGCTL2);
+
+	ts_reg_dump(priv);
+
+	return 0;
+}
+
+static void iproc_ts_stop(struct input_dev *dev)
+{
+	u32 val;
+	struct iproc_ts_priv *priv = input_get_drvdata(dev);
+
+	writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+
+	/* Only power down touch screen controller */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_PWR_TS;
+	writel(val, priv->regs + REGCTL2);
+
+	clk_disable(priv->tsc_clk);
+}
+
+static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv)
+{
+	struct device_node *np = dev->of_node;
+	u32 val;
+
+	priv->cfg_params = iproc_default_config;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+		if (val < 1 || val > 256) {
+			dev_err(dev, "scanning_period (%u) must be [1-256]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.scanning_period = val;
+	}
+
+	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "debounce_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.debounce_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
+		if (val > 11) {
+			dev_err(dev, "settling_timeout (%u) must be [0-11]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.settling_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "touch_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.touch_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "average_data", &val) >= 0) {
+		if (val > 8) {
+			dev_err(dev, "average_data (%u) must be [0-8]\n", val);
+			return -EINVAL;
+		}
+		priv->cfg_params.average_data = val;
+	}
+
+	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
+		if (val > 31) {
+			dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.fifo_threshold = val;
+	}
+
+	/* Parse optional properties. */
+	of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x);
+	of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y);
+
+	of_property_read_u32(np, "touchscreen-fuzz-x",
+			     &priv->cfg_params.fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y",
+			     &priv->cfg_params.fuzz_y);
+
+	priv->cfg_params.invert_x =
+		of_property_read_bool(np, "touchscreen-inverted-x");
+	priv->cfg_params.invert_y =
+		of_property_read_bool(np, "touchscreen-inverted-y");
+
+	return 0;
+}
+
+static int iproc_ts_probe(struct platform_device *pdev)
+{
+	struct iproc_ts_priv *priv;
+	struct input_dev *idev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* touchscreen controller memory mapped regs */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->regs)) {
+		error = PTR_ERR(priv->regs);
+		dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+		return error;
+	}
+
+	priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
+	if (IS_ERR(priv->tsc_clk)) {
+		error = PTR_ERR(priv->tsc_clk);
+		dev_err(&pdev->dev,
+			"failed getting clock tsc_clk: %d\n", error);
+		return error;
+	}
+
+	priv->pdev = pdev;
+	error = iproc_get_tsc_config(&pdev->dev, priv);
+	if (error) {
+		dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error);
+		return error;
+	}
+
+	idev = devm_input_allocate_device(&pdev->dev);
+	if (!idev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	priv->idev = idev;
+	priv->pen_status = PEN_UP_STATUS;
+
+	/* Set input device info  */
+	idev->name = IPROC_TS_NAME;
+	idev->dev.parent = &pdev->dev;
+
+	idev->id.bustype = BUS_HOST;
+	idev->id.vendor = SERIO_UNKNOWN;
+	idev->id.product = 0;
+	idev->id.version = 0;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	__set_bit(BTN_TOUCH, idev->keybit);
+
+	input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x,
+			     priv->cfg_params.fuzz_x, 0);
+	input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y,
+			     priv->cfg_params.fuzz_y, 0);
+
+	idev->open = iproc_ts_start;
+	idev->close = iproc_ts_stop;
+
+	input_set_drvdata(idev, priv);
+	platform_set_drvdata(pdev, priv);
+
+	/* get interrupt */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq);
+		return irq;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq,
+				 iproc_touchscreen_interrupt,
+				 IRQF_SHARED, IPROC_TS_NAME, pdev);
+	if (error)
+		return error;
+
+	error = input_register_device(priv->idev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id iproc_ts_of_match[] = {
+	{.compatible = "brcm,iproc-touchscreen", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, iproc_ts_of_match);
+
+static struct platform_driver iproc_ts_driver = {
+	.probe = iproc_ts_probe,
+	.driver = {
+		.name	= IPROC_TS_NAME,
+		.of_match_table = of_match_ptr(iproc_ts_of_match),
+	},
+};
+
+module_platform_driver(iproc_ts_driver);
+
+MODULE_DESCRIPTION("IPROC Touchscreen driver");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
new file mode 100644
index 000000000000..32e9db0e04bf
--- /dev/null
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -0,0 +1,316 @@
+/*
+ * Driver for ChipOne icn8318 i2c touchscreen controller
+ *
+ * Copyright (c) 2015 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define ICN8318_REG_POWER		4
+#define ICN8318_REG_TOUCHDATA		16
+
+#define ICN8318_POWER_ACTIVE		0
+#define ICN8318_POWER_MONITOR		1
+#define ICN8318_POWER_HIBERNATE		2
+
+#define ICN8318_MAX_TOUCHES		5
+
+struct icn8318_touch {
+	__u8 slot;
+	__be16 x;
+	__be16 y;
+	__u8 pressure;	/* Seems more like finger width then pressure really */
+	__u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8318_EVENT_NO_DATA	1 /* No finger seen yet since wakeup */
+#define ICN8318_EVENT_UPDATE1	2 /* New or updated coordinates */
+#define ICN8318_EVENT_UPDATE2	3 /* New or updated coordinates */
+#define ICN8318_EVENT_END	4 /* Finger lifted */
+} __packed;
+
+struct icn8318_touch_data {
+	__u8 softbutton;
+	__u8 touch_count;
+	struct icn8318_touch touches[ICN8318_MAX_TOUCHES];
+} __packed;
+
+struct icn8318_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *wake_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+static int icn8318_read_touch_data(struct i2c_client *client,
+				   struct icn8318_touch_data *touch_data)
+{
+	u8 reg = ICN8318_REG_TOUCHDATA;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(struct icn8318_touch_data),
+			.buf = (u8 *)touch_data
+		}
+	};
+
+	return i2c_transfer(client->adapter, msg, 2);
+}
+
+static inline bool icn8318_touch_active(u8 event)
+{
+	return (event == ICN8318_EVENT_UPDATE1) ||
+	       (event == ICN8318_EVENT_UPDATE2);
+}
+
+static irqreturn_t icn8318_irq(int irq, void *dev_id)
+{
+	struct icn8318_data *data = dev_id;
+	struct device *dev = &data->client->dev;
+	struct icn8318_touch_data touch_data;
+	int i, ret, x, y;
+
+	ret = icn8318_read_touch_data(data->client, &touch_data);
+	if (ret < 0) {
+		dev_err(dev, "Error reading touch data: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.softbutton) {
+		/*
+		 * Other data is invalid when a softbutton is pressed.
+		 * This needs some extra devicetree bindings to map the icn8318
+		 * softbutton codes to evdev codes. Currently no known devices
+		 * use this.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.touch_count > ICN8318_MAX_TOUCHES) {
+		dev_warn(dev, "Too much touches %d > %d\n",
+			 touch_data.touch_count, ICN8318_MAX_TOUCHES);
+		touch_data.touch_count = ICN8318_MAX_TOUCHES;
+	}
+
+	for (i = 0; i < touch_data.touch_count; i++) {
+		struct icn8318_touch *touch = &touch_data.touches[i];
+		bool act = icn8318_touch_active(touch->event);
+
+		input_mt_slot(data->input, touch->slot);
+		input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		x = be16_to_cpu(touch->x);
+		y = be16_to_cpu(touch->y);
+
+		if (data->invert_x)
+			x = data->max_x - x;
+
+		if (data->invert_y)
+			y = data->max_y - y;
+
+		if (!data->swap_x_y) {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
+		} else {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
+		}
+	}
+
+	input_mt_sync_frame(data->input);
+	input_sync(data->input);
+
+	return IRQ_HANDLED;
+}
+
+static int icn8318_start(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	enable_irq(data->client->irq);
+	gpiod_set_value_cansleep(data->wake_gpio, 1);
+
+	return 0;
+}
+
+static void icn8318_stop(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	disable_irq(data->client->irq);
+	i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER,
+				  ICN8318_POWER_HIBERNATE);
+	gpiod_set_value_cansleep(data->wake_gpio, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int icn8318_suspend(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_stop(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+
+static int icn8318_resume(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_start(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume);
+
+static int icn8318_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct icn8318_data *data;
+	struct input_dev *input;
+	u32 fuzz_x = 0, fuzz_y = 0;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "Error no irq specified\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(data->wake_gpio)) {
+		error = PTR_ERR(data->wake_gpio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Error getting wake gpio: %d\n", error);
+		return error;
+	}
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
+	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	/* Optional */
+	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
+	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
+	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = icn8318_start;
+	input->close = icn8318_stop;
+	input->dev.parent = dev;
+
+	if (!data->swap_x_y) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_x, fuzz_x, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_y, fuzz_y, 0);
+	} else {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_y, fuzz_y, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_x, fuzz_x, 0);
+	}
+
+	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	data->client = client;
+	data->input = input;
+	input_set_drvdata(input, data);
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq,
+					  IRQF_ONESHOT, client->name, data);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	/* Stop device till opened */
+	icn8318_stop(data->input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static const struct of_device_id icn8318_of_match[] = {
+	{ .compatible = "chipone,icn8318" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, icn8318_of_match);
+
+/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */
+static const struct i2c_device_id icn8318_i2c_id[] = {
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id);
+
+static struct i2c_driver icn8318_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "chipone_icn8318",
+		.pm	= &icn8318_pm_ops,
+		.of_match_table = icn8318_of_match,
+	},
+	.probe = icn8318_probe,
+	.id_table = icn8318_i2c_id,
+};
+
+module_i2c_driver(icn8318_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d4c24fb7704f..e6aef3e48bd9 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -37,6 +37,7 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/input/edt-ft5x06.h>
 
 #define MAX_SUPPORT_POINTS		5
@@ -1034,7 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
-	__set_bit(EV_SYN, input->evbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(BTN_TOUCH, input->keybit);
@@ -1044,6 +1044,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 			     0, tsdata->num_x * 64 - 1, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
+
+	if (!pdata)
+		touchscreen_parse_of_params(input);
+
 	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 926c58e540c0..43b3c9c2d788 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -98,7 +98,6 @@
 #define MAX_FW_UPDATE_RETRIES	30
 
 #define ELAN_FW_PAGESIZE	132
-#define ELAN_FW_FILENAME	"elants_i2c.bin"
 
 /* calibration timeout definition */
 #define ELAN_CALI_TIMEOUT_MSEC	10000
@@ -697,12 +696,19 @@ static int elants_i2c_fw_update(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
 	const struct firmware *fw;
+	char *fw_name;
 	int error;
 
-	error = request_firmware(&fw, ELAN_FW_FILENAME, &client->dev);
+	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version);
+	if (!fw_name)
+		return -ENOMEM;
+
+	dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
+	error = request_firmware(&fw, fw_name, &client->dev);
+	kfree(fw_name);
 	if (error) {
-		dev_err(&client->dev, "failed to request firmware %s: %d\n",
-			ELAN_FW_FILENAME, error);
+		dev_err(&client->dev, "failed to request firmware: %d\n",
+			error);
 		return error;
 	}
 
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index ca196689f025..3af16984d57c 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -23,6 +23,8 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
 #include <asm/unaligned.h>
 
 struct goodix_ts_data {
@@ -48,6 +50,7 @@ struct goodix_ts_data {
 #define GOODIX_REG_VERSION		0x8140
 
 #define RESOLUTION_LOC		1
+#define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
 
 static const unsigned long goodix_irq_flags[] = {
@@ -99,7 +102,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	}
 
 	touch_num = data[0] & 0x0f;
-	if (touch_num > GOODIX_MAX_CONTACTS)
+	if (touch_num > ts->max_touch_num)
 		return -EPROTO;
 
 	if (touch_num > 1) {
@@ -141,7 +144,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
  */
 static void goodix_process_events(struct goodix_ts_data *ts)
 {
-	u8  point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+	u8  point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num];
 	int touch_num;
 	int i;
 
@@ -202,21 +205,23 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
 		ts->int_trigger_type = GOODIX_INT_TRIGGER;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 		return;
 	}
 
 	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
 	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
-	ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
-	if (!ts->abs_x_max || !ts->abs_y_max) {
+	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
 		dev_err(&ts->client->dev,
 			"Invalid config, using defaults\n");
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 	}
 }
 
-
 /**
  * goodix_read_version - Read goodix touchscreen version
  *
@@ -295,7 +300,7 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
-	input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS,
+	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 
 	ts->input_dev->name = "Goodix Capacitive TouchScreen";
@@ -372,11 +377,27 @@ static const struct i2c_device_id goodix_ts_id[] = {
 	{ }
 };
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id goodix_acpi_match[] = {
 	{ "GDIX1001", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+	{ .compatible = "goodix,gt911" },
+	{ .compatible = "goodix,gt9110" },
+	{ .compatible = "goodix,gt912" },
+	{ .compatible = "goodix,gt927" },
+	{ .compatible = "goodix,gt9271" },
+	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt967" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
 
 static struct i2c_driver goodix_ts_driver = {
 	.probe = goodix_ts_probe,
@@ -384,7 +405,8 @@ static struct i2c_driver goodix_ts_driver = {
 	.driver = {
 		.name = "Goodix-TS",
 		.owner = THIS_MODULE,
-		.acpi_match_table = goodix_acpi_match,
+		.acpi_match_table = ACPI_PTR(goodix_acpi_match),
+		.of_match_table = of_match_ptr(goodix_of_match),
 	},
 };
 module_i2c_driver(goodix_ts_driver);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index f8f9b84230b1..b82b5207c78b 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -11,8 +11,41 @@
 
 #include <linux/of.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
 
+static u32 of_get_optional_u32(struct device_node *np,
+			       const char *property)
+{
+	u32 val = 0;
+
+	of_property_read_u32(np, property, &val);
+
+	return val;
+}
+
+static void touchscreen_set_params(struct input_dev *dev,
+				   unsigned long axis,
+				   int max, int fuzz)
+{
+	struct input_absinfo *absinfo;
+
+	if (!test_bit(axis, dev->absbit)) {
+		/*
+		 * Emit a warning only if the axis is not a multitouch
+		 * axis, which might not be set by the driver.
+		 */
+		if (!input_is_mt_axis(axis))
+			dev_warn(&dev->dev,
+				 "DT specifies parameters but the axis is not set up\n");
+		return;
+	}
+
+	absinfo = &dev->absinfo[axis];
+	absinfo->maximum = max;
+	absinfo->fuzz = fuzz;
+}
+
 /**
  * touchscreen_parse_of_params - parse common touchscreen DT properties
  * @dev: device that should be parsed
@@ -24,22 +57,31 @@
 void touchscreen_parse_of_params(struct input_dev *dev)
 {
 	struct device_node *np = dev->dev.parent->of_node;
-	struct input_absinfo *absinfo;
+	u32 maximum, fuzz;
 
 	input_alloc_absinfo(dev);
 	if (!dev->absinfo)
 		return;
 
-	absinfo = &dev->absinfo[ABS_X];
-	of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-x");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_X, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_Y];
-	of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-y");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_Y, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_PRESSURE];
-	of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-max-pressure");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz);
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_of_params);
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index b93a28b955fd..c0116994067d 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -30,6 +30,10 @@
  * These kinds of heuristics are just asking for trouble (and don't belong
  * in the kernel). So this driver offers straight forward, reliable single
  * touch functionality only.
+ *
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * (looks like the description in the A20 User Manual v1.3 is better
+ * than the one in the A10 User Manual v.1.5)
  */
 
 #include <linux/err.h>
@@ -193,7 +197,7 @@ static int sun4i_get_temp(const struct sun4i_ts_data *ts, long *temp)
 	if (ts->temp_data == -1)
 		return -EAGAIN;
 
-	*temp = (ts->temp_data - ts->temp_offset) * ts->temp_step;
+	*temp = ts->temp_data * ts->temp_step - ts->temp_offset;
 
 	return 0;
 }
@@ -246,6 +250,8 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	int error;
 	u32 reg;
 	bool ts_attached;
+	u32 tp_sensitive_adjust = 15;
+	u32 filter_type = 1;
 
 	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
 	if (!ts)
@@ -255,22 +261,31 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	ts->ignore_fifo_data = true;
 	ts->temp_data = -1;
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
-		/* Allwinner SDK has temperature = -271 + (value / 6) (C) */
-		ts->temp_offset = 1626;
+		/* Allwinner SDK has temperature (C) = (value / 6) - 271 */
+		ts->temp_offset = 271000;
 		ts->temp_step = 167;
+	} else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
+		/*
+		 * The A10 temperature sensor has quite a wide spread, these
+		 * parameters are based on the averaging of the calibration
+		 * results of 4 completely different boards, with a spread of
+		 * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
+		 */
+		ts->temp_offset = 257000;
+		ts->temp_step = 133;
 	} else {
 		/*
 		 * The user manuals do not contain the formula for calculating
 		 * the temperature. The formula used here is from the AXP209,
 		 * which is designed by X-Powers, an affiliate of Allwinner:
 		 *
-		 *     temperature = -144.7 + (value * 0.1)
+		 *     temperature (C) = (value * 0.1) - 144.7
 		 *
 		 * Allwinner does not have any documentation whatsoever for
 		 * this hardware. Moreover, it is claimed that the sensor
 		 * is inaccurate and cannot work properly.
 		 */
-		ts->temp_offset = 1447;
+		ts->temp_offset = 144700;
 		ts->temp_step = 100;
 	}
 
@@ -313,14 +328,20 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	       ts->base + TP_CTRL0);
 
 	/*
-	 * sensitive_adjust = 15 : max, which is not all that sensitive,
+	 * tp_sensitive_adjust is an optional property
 	 * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
 	 */
-	writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
+	of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
+			     &tp_sensitive_adjust);
+	writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
 	       ts->base + TP_CTRL2);
 
-	/* Enable median filter, type 1 : 5/3 */
-	writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
+	/*
+	 * Enable median and averaging filter, optional property for
+	 * filter type.
+	 */
+	of_property_read_u32(np, "allwinner,filter-type", &filter_type);
+	writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
 
 	/* Enable temperature measurement, period 1953 (2 seconds) */
 	writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
@@ -330,10 +351,10 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	 * finally enable tp mode.
 	 */
 	reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
-	if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts"))
-		reg |= TP_MODE_EN(1);
-	else
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
 		reg |= SUN6I_TP_MODE_EN(1);
+	else
+		reg |= TP_MODE_EN(1);
 	writel(reg, ts->base + TP_CTRL1);
 
 	/*
@@ -383,6 +404,7 @@ static int sun4i_ts_remove(struct platform_device *pdev)
 
 static const struct of_device_id sun4i_ts_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-ts", },
+	{ .compatible = "allwinner,sun5i-a13-ts", },
 	{ .compatible = "allwinner,sun6i-a31-ts", },
 	{ /* sentinel */ }
 };
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
new file mode 100644
index 000000000000..aecb9ad2e701
--- /dev/null
+++ b/drivers/input/touchscreen/sx8654.c
@@ -0,0 +1,286 @@
+/*
+ * Driver for Semtech SX8654 I2C touchscreen controller.
+ *
+ * Copyright (c) 2015 Armadeus Systems
+ *	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
+ *
+ * Using code from:
+ *  - sx865x.c
+ *	Copyright (c) 2013 U-MoBo Srl
+ *	Pierluigi Passaro <p.passaro@u-mobo.com>
+ *  - sx8650.c
+ *      Copyright (c) 2009 Wayne Roberts
+ *  - tsc2007.c
+ *      Copyright (c) 2008 Kwangwoo Lee
+ *  - ads7846.c
+ *      Copyright (c) 2005 David Brownell
+ *      Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *      Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *      Copyright (C) 2002 MontaVista Software
+ *      Copyright (C) 2004 Texas Instruments
+ *      Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+/* register addresses */
+#define I2C_REG_TOUCH0			0x00
+#define I2C_REG_TOUCH1			0x01
+#define I2C_REG_CHANMASK		0x04
+#define I2C_REG_IRQMASK			0x22
+#define I2C_REG_IRQSRC			0x23
+#define I2C_REG_SOFTRESET		0x3f
+
+/* commands */
+#define CMD_READ_REGISTER		0x40
+#define CMD_MANUAL			0xc0
+#define CMD_PENTRG			0xe0
+
+/* value for I2C_REG_SOFTRESET */
+#define SOFTRESET_VALUE			0xde
+
+/* bits for I2C_REG_IRQSRC */
+#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
+#define IRQ_PENRELEASE			0x04
+
+/* bits for RegTouch1 */
+#define CONDIRQ				0x20
+#define FILT_7SA			0x03
+
+/* bits for I2C_REG_CHANMASK */
+#define CONV_X				0x80
+#define CONV_Y				0x40
+
+/* coordinates rate: higher nibble of CTRL0 register */
+#define RATE_MANUAL			0x00
+#define RATE_5000CPS			0xf0
+
+/* power delay: lower nibble of CTRL0 register */
+#define POWDLY_1_1MS			0x0b
+
+#define MAX_12BIT			((1 << 12) - 1)
+
+struct sx8654 {
+	struct input_dev *input;
+	struct i2c_client *client;
+};
+
+static irqreturn_t sx8654_irq(int irq, void *handle)
+{
+	struct sx8654 *sx8654 = handle;
+	int irqsrc;
+	u8 data[4];
+	unsigned int x, y;
+	int retval;
+
+	irqsrc = i2c_smbus_read_byte_data(sx8654->client,
+					  CMD_READ_REGISTER | I2C_REG_IRQSRC);
+	dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
+
+	if (irqsrc < 0)
+		goto out;
+
+	if (irqsrc & IRQ_PENRELEASE) {
+		dev_dbg(&sx8654->client->dev, "pen release interrupt");
+
+		input_report_key(sx8654->input, BTN_TOUCH, 0);
+		input_sync(sx8654->input);
+	}
+
+	if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
+		dev_dbg(&sx8654->client->dev, "pen touch interrupt");
+
+		retval = i2c_master_recv(sx8654->client, data, sizeof(data));
+		if (retval != sizeof(data))
+			goto out;
+
+		/* invalid data */
+		if (unlikely(data[0] & 0x80 || data[2] & 0x80))
+			goto out;
+
+		x = ((data[0] & 0xf) << 8) | (data[1]);
+		y = ((data[2] & 0xf) << 8) | (data[3]);
+
+		input_report_abs(sx8654->input, ABS_X, x);
+		input_report_abs(sx8654->input, ABS_Y, y);
+		input_report_key(sx8654->input, BTN_TOUCH, 1);
+		input_sync(sx8654->input);
+
+		dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int sx8654_open(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	/* enable pen trigger mode */
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
+					  RATE_5000CPS | POWDLY_1_1MS);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte(client, CMD_PENTRG);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_PENTRG failed");
+		return error;
+	}
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void sx8654_close(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	disable_irq(client->irq);
+
+	/* enable manual mode mode */
+	error = i2c_smbus_write_byte(client, CMD_MANUAL);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_MANUAL failed");
+		return;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return;
+	}
+}
+
+static int sx8654_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct sx8654 *sx8654;
+	struct input_dev *input;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENXIO;
+
+	sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
+	if (!sx8654)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!sx8654)
+		return -ENOMEM;
+
+	input->name = "SX8654 I2C Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = sx8654_open;
+	input->close = sx8654_close;
+
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+	sx8654->client = client;
+	sx8654->input = input;
+
+	input_set_drvdata(sx8654->input, sx8654);
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
+					  SOFTRESET_VALUE);
+	if (error) {
+		dev_err(&client->dev, "writing softreset value failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
+					  CONV_X | CONV_Y);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+					  IRQ_PENTOUCH_TOUCHCONVDONE |
+						IRQ_PENRELEASE);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
+					  CONDIRQ | FILT_7SA);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, sx8654_irq,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, sx8654);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ %d, error: %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	/* Disable the IRQ, we'll enable it in sx8654_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(sx8654->input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, sx8654);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sx8654_of_match[] = {
+	{ .compatible = "semtech,sx8654", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sx8654_of_match);
+#endif
+
+static const struct i2c_device_id sx8654_id_table[] = {
+	{ "semtech_sx8654", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
+
+static struct i2c_driver sx8654_driver = {
+	.driver = {
+		.name = "sx8654",
+		.of_match_table = of_match_ptr(sx8654_of_match),
+	},
+	.id_table = sx8654_id_table,
+	.probe = sx8654_probe,
+};
+module_i2c_driver(sx8654_driver);
+
+MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
+MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 1bf9906b5a3f..ccc8aa615709 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -75,7 +75,7 @@ struct tsc2007 {
 	u16			model;
 	u16			x_plate_ohms;
 	u16			max_rt;
-	unsigned long		poll_period;
+	unsigned long		poll_period; /* in jiffies */
 	int			fuzzx;
 	int			fuzzy;
 	int			fuzzz;
@@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 			dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
 		}
 
-		wait_event_timeout(ts->wait, ts->stopped,
-				   msecs_to_jiffies(ts->poll_period));
+		wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
 	}
 
 	dev_dbg(&ts->client->dev, "UP\n");
@@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
 		ts->fuzzz = val32;
 
 	if (!of_property_read_u64(np, "ti,poll-period", &val64))
-		ts->poll_period = val64;
+		ts->poll_period = msecs_to_jiffies(val64);
 	else
-		ts->poll_period = 1;
+		ts->poll_period = msecs_to_jiffies(1);
 
 	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
 		ts->x_plate_ohms = val32;
@@ -350,7 +349,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
-	ts->poll_period       = pdata->poll_period ? : 1;
+	ts->poll_period       = msecs_to_jiffies(pdata->poll_period ? : 1);
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
 	ts->fuzzx             = pdata->fuzzx;
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index a0966331a89b..f2c6c352c55a 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -132,6 +132,7 @@ enum {
 	DEVTYPE_GUNZE,
 	DEVTYPE_DMC_TSC10,
 	DEVTYPE_IRTOUCH,
+	DEVTYPE_IRTOUCH_HIRES,
 	DEVTYPE_IDEALTEK,
 	DEVTYPE_GENERAL_TOUCH,
 	DEVTYPE_GOTOP,
@@ -198,6 +199,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
@@ -1177,6 +1179,15 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.rept_size	= 8,
 		.read_data	= irtouch_read_data,
 	},
+
+	[DEVTYPE_IRTOUCH_HIRES] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK