diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2016-06-30 04:48:52 +0300 |
---|---|---|
committer | Jonathan Cameron <jic23@kernel.org> | 2016-07-03 13:32:14 +0300 |
commit | aae9539496510a728bfe7d555b3ecfd5a146359a (patch) | |
tree | 6674a333d6ae493920ddf4e6f792d18305d105f9 /drivers/iio | |
parent | b26b4e91700ff45d033eeaac91597d6d479378a4 (diff) | |
download | linux-aae9539496510a728bfe7d555b3ecfd5a146359a.tar.xz |
iio: pressure: bmp280: add support for BMP085 EOC interrupt
The first version of this sensor, BMP085, supports sending an
End-of-Conversion (EOC) interrupt. Add code to support this using
a completion, in a similar vein as drivers/misc/bmp085.c does.
Make sure to check that we are given a rising edge, because the
EOC line goes from low-to-high when the conversion is ready.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio')
-rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 87 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280-i2c.c | 3 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280-spi.c | 3 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280.h | 3 |
4 files changed, 86 insertions, 10 deletions
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 43bd0b07619c..3ebd84f06e36 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -27,6 +27,9 @@ #include <linux/iio/sysfs.h> #include <linux/gpio/consumer.h> #include <linux/regulator/consumer.h> +#include <linux/interrupt.h> +#include <linux/irq.h> /* For irq_get_irq_data() */ +#include <linux/completion.h> #include "bmp280.h" @@ -34,6 +37,8 @@ struct bmp280_data { struct device *dev; struct mutex lock; struct regmap *regmap; + struct completion done; + bool use_eoc; const struct bmp280_chip_info *chip_info; struct regulator *vddd; struct regulator *vdda; @@ -595,16 +600,32 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) unsigned int delay_us; unsigned int ctrl; + if (data->use_eoc) + init_completion(&data->done); + ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas); if (ret) return ret; - if (ctrl_meas == BMP180_MEAS_TEMP) - delay_us = 4500; - else - delay_us = conversion_time_max[data->oversampling_press]; - - usleep_range(delay_us, delay_us + 1000); + if (data->use_eoc) { + /* + * If we have a completion interrupt, use it, wait up to + * 100ms. The longest conversion time listed is 76.5 ms for + * advanced resolution mode. + */ + ret = wait_for_completion_timeout(&data->done, + 1 + msecs_to_jiffies(100)); + if (!ret) + dev_err(data->dev, "timeout waiting for completion\n"); + } else { + if (ctrl_meas == BMP180_MEAS_TEMP) + delay_us = 4500; + else + delay_us = + conversion_time_max[data->oversampling_press]; + + usleep_range(delay_us, delay_us + 1000); + } ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl); if (ret) @@ -846,10 +867,51 @@ static const struct bmp280_chip_info bmp180_chip_info = { .read_press = bmp180_read_press, }; +static irqreturn_t bmp085_eoc_irq(int irq, void *d) +{ + struct bmp280_data *data = d; + + complete(&data->done); + + return IRQ_HANDLED; +} + +static int bmp085_fetch_eoc_irq(struct device *dev, + const char *name, + int irq, + struct bmp280_data *data) +{ + unsigned long irq_trig; + int ret; + + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + if (irq_trig != IRQF_TRIGGER_RISING) { + dev_err(dev, "non-rising trigger given for EOC interrupt, " + "trying to enforce it\n"); + irq_trig = IRQF_TRIGGER_RISING; + } + ret = devm_request_threaded_irq(dev, + irq, + bmp085_eoc_irq, + NULL, + irq_trig, + name, + data); + if (ret) { + /* Bail out without IRQ but keep the driver in place */ + dev_err(dev, "unable to request DRDY IRQ\n"); + return 0; + } + + data->use_eoc = true; + return 0; +} + int bmp280_common_probe(struct device *dev, struct regmap *regmap, unsigned int chip, - const char *name) + const char *name, + int irq) { int ret; struct iio_dev *indio_dev; @@ -948,6 +1010,17 @@ int bmp280_common_probe(struct device *dev, dev_set_drvdata(dev, indio_dev); + /* + * Attempt to grab an optional EOC IRQ - only the BMP085 has this + * however as it happens, the BMP085 shares the chip ID of BMP180 + * so we look for an IRQ if we have that. + */ + if (irq > 0 || (chip_id == BMP180_CHIP_ID)) { + ret = bmp085_fetch_eoc_irq(dev, name, irq, data); + if (ret) + goto out_disable_vdda; + } + ret = iio_device_register(indio_dev); if (ret) goto out_disable_vdda; diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index 7c70ee172bba..8cf8a900bdaa 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -33,7 +33,8 @@ static int bmp280_i2c_probe(struct i2c_client *client, return bmp280_common_probe(&client->dev, regmap, id->driver_data, - id->name); + id->name, + client->irq); } static int bmp280_i2c_remove(struct i2c_client *client) diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 216e64b682bf..cd365ba74b68 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -81,7 +81,8 @@ static int bmp280_spi_probe(struct spi_device *spi) return bmp280_common_probe(&spi->dev, regmap, id->driver_data, - id->name); + id->name, + spi->irq); } static int bmp280_spi_remove(struct spi_device *spi) diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index b9fc28ce9428..573334b8e93b 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -104,5 +104,6 @@ extern const struct regmap_config bmp280_regmap_config; int bmp280_common_probe(struct device *dev, struct regmap *regmap, unsigned int chip, - const char *name); + const char *name, + int irq); int bmp280_common_remove(struct device *dev); |