gnss: add driver for mediatek receivers

Add driver for serial-connected Mediatek-based GNSS receivers.

These devices typically boot transmitting vendor specific NMEA output
sequences. The serial port bit rate is read from the device tree
"current-speed".

Note that the driver uses the generic GNSS serial implementation and
therefore essentially only manages power abstracted into three power
states: ACTIVE, STANDBY, and OFF.

For mediatek receivers with a main supply and no enable-gpios, this simply
means that the main supply is disabled in STANDBY and OFF (the optional
backup supply is kept enabled while the driver is bound).

Note that the timepulse-support is left unimplemented.

Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
[ johan: rename backup supply ]
Signed-off-by: Johan Hovold <johan@kernel.org>

3 files changed, 168 insertions, 0 deletions

diff --git a/drivers/gnss/Kconfig b/drivers/gnss/Kconfig
index 6abc88514512..6d8c8027e1cd 100644
--- a/drivers/gnss/Kconfig
+++ b/drivers/gnss/Kconfig
@@ -15,6 +15,19 @@ if GNSS
 config GNSS_SERIAL
 	tristate
 
+config GNSS_MTK_SERIAL
+	tristate "Mediatek GNSS receiver support"
+	depends on SERIAL_DEV_BUS
+	select GNSS_SERIAL
+	help
+	  Say Y here if you have a Mediatek-based GNSS receiver which uses a
+	  serial interface.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gnss-mtk.
+
+	  If unsure, say N.
+
 config GNSS_SIRF_SERIAL
 	tristate "SiRFstar GNSS receiver support"
 	depends on SERIAL_DEV_BUS
diff --git a/drivers/gnss/Makefile b/drivers/gnss/Makefile
index 5cf0ebe0330a..451f11401ecc 100644
--- a/drivers/gnss/Makefile
+++ b/drivers/gnss/Makefile
@@ -9,6 +9,9 @@ gnss-y := core.o
 obj-$(CONFIG_GNSS_SERIAL)		+= gnss-serial.o
 gnss-serial-y := serial.o
 
+obj-$(CONFIG_GNSS_MTK_SERIAL)		+= gnss-mtk.o
+gnss-mtk-y := mtk.o
+
 obj-$(CONFIG_GNSS_SIRF_SERIAL)		+= gnss-sirf.o
 gnss-sirf-y := sirf.o
 
diff --git a/drivers/gnss/mtk.c b/drivers/gnss/mtk.c
new file mode 100644
index 000000000000..d1fc55560daf
--- /dev/null
+++ b/drivers/gnss/mtk.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mediatek GNSS receiver driver
+ *
+ * Copyright (C) 2018 Johan Hovold <johan@kernel.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/gnss.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+
+#include "serial.h"
+
+struct mtk_data {
+	struct regulator *vbackup;
+	struct regulator *vcc;
+};
+
+static int mtk_set_active(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_enable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_standby(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_disable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_power(struct gnss_serial *gserial,
+			 enum gnss_serial_pm_state state)
+{
+	switch (state) {
+	case GNSS_SERIAL_ACTIVE:
+		return mtk_set_active(gserial);
+	case GNSS_SERIAL_OFF:
+	case GNSS_SERIAL_STANDBY:
+		return mtk_set_standby(gserial);
+	}
+
+	return -EINVAL;
+}
+
+static const struct gnss_serial_ops mtk_gserial_ops = {
+	.set_power = mtk_set_power,
+};
+
+static int mtk_probe(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial;
+	struct mtk_data *data;
+	int ret;
+
+	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	if (IS_ERR(gserial)) {
+		ret = PTR_ERR(gserial);
+		return ret;
+	}
+
+	gserial->ops = &mtk_gserial_ops;
+
+	gserial->gdev->type = GNSS_TYPE_MTK;
+
+	data = gnss_serial_get_drvdata(gserial);
+
+	data->vcc = devm_regulator_get(&serdev->dev, "vcc");
+	if (IS_ERR(data->vcc)) {
+		ret = PTR_ERR(data->vcc);
+		goto err_free_gserial;
+	}
+
+	data->vbackup = devm_regulator_get_optional(&serdev->dev, "vbackup");
+	if (IS_ERR(data->vbackup)) {
+		ret = PTR_ERR(data->vbackup);
+		if (ret == -ENODEV)
+			data->vbackup = NULL;
+		else
+			goto err_free_gserial;
+	}
+
+	if (data->vbackup) {
+		ret = regulator_enable(data->vbackup);
+		if (ret)
+			goto err_free_gserial;
+	}
+
+	ret = gnss_serial_register(gserial);
+	if (ret)
+		goto err_disable_vbackup;
+
+	return 0;
+
+err_disable_vbackup:
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+err_free_gserial:
+	gnss_serial_free(gserial);
+
+	return ret;
+}
+
+static void mtk_remove(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+
+	gnss_serial_deregister(gserial);
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+	gnss_serial_free(gserial);
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_of_match[] = {
+	{ .compatible = "globaltop,pa6h" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_of_match);
+#endif
+
+static struct serdev_device_driver mtk_driver = {
+	.driver	= {
+		.name		= "gnss-mtk",
+		.of_match_table	= of_match_ptr(mtk_of_match),
+		.pm		= &gnss_serial_pm_ops,
+	},
+	.probe	= mtk_probe,
+	.remove	= mtk_remove,
+};
+module_serdev_device_driver(mtk_driver);
+
+MODULE_AUTHOR("Loys Ollivier <lollivier@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek GNSS receiver driver");
+MODULE_LICENSE("GPL v2");