Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

1 files changed, 74 insertions, 95 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 922b7464807f..a07086d6a0b2 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -33,6 +33,7 @@
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,9 +59,6 @@
 #include "mux.h"
 #include "hsmmc.h"
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource devkit8000_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &devkit8000_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &devkit8000_nand_resource,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = {
 	},
 	{}	/* Terminator */
 };
-static struct omap_board_config_kernel devkit8000_config[] __initdata = {
-};
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
 	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
 
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
+
 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
-{
+static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-	return 0;
-}
-
-static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply devkit8000_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi2.0");
 
 static struct omap_dss_device devkit8000_lcd_device = {
 	.name                   = "lcd",
-	.driver_name            = "innolux_at_panel",
+	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
@@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = {
 	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
@@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = {
 	.driver_name            = "venc",
 	.type                   = OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable        = devkit8000_panel_enable_tv,
-	.platform_disable       = devkit8000_panel_disable_tv,
 };
 
 
@@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = {
 	},
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
-	.supply = "vdda_dac",
-	.dev	= &devkit8000_dss_device.dev,
-};
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* link regulators to MMC adapters */
 	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+        /* gpio + 1 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + 1;
+	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+
+	/* gpio + 7 is "DVI_PD" (out, active low) */
+	devkit8000_dvi_device.reset_gpio = gpio + 7;
+	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
 
 	return 0;
 }
@@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
-	{
-	.supply		= "vdvi",
-	.dev		= &devkit8000_lcd_device.dev,
-	},
-	{
-	.supply		= "vdds_dsi",
-	.dev		= &devkit8000_dss_device.dev,
-	}
-};
+static struct regulator_consumer_supply devkit8000_vpll1_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 	.consumer_supplies	= &devkit8000_vmmc1_supply,
 };
 
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data devkit8000_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vsim_supply,
-};
-
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
 static struct regulator_init_data devkit8000_vdac = {
 	.constraints = {
@@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = {
 	.consumer_supplies	= &devkit8000_vdda_dac_supply,
 };
 
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
@@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
-	.consumer_supplies	= devkit8000_vpll2_supplies,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vpll1_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.apply_uV               = true,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+			| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+			| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &devkit8000_vio_supply,
 };
 
 static struct twl4030_usb_data devkit8000_usb_data = {
@@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = {
 	.gpio		= &devkit8000_gpio_data,
 	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vsim		= &devkit8000_vsim,
 	.vdac		= &devkit8000_vdac,
-	.vpll2		= &devkit8000_vpll2,
+	.vpll1		= &devkit8000_vpll1,
+	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
 };
 
 static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65930", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &devkit8000_twldata,
@@ -464,8 +446,6 @@ static struct platform_device keys_gpio = {
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = {
 
 static void __init omap_dm9000_init(void)
 {
+	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
+	struct omap_die_id odi;
+
 	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
 			OMAP_DM9000_GPIO_IRQ);
@@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void)
 		}
 
 	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+
+	/* init the mac address using DIE id */
+	omap_get_die_id(&odi);
+
+	eth_addr[0] = 0x02; /* locally administered */
+	eth_addr[1] = odi.id_1 & 0xff;
+	eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
+	eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
+	eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
+	eth_addr[5] = (odi.id_0 & 0x000000ff);
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
@@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		devkit8000_nand_data.cs = nandcs;
-		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		devkit8000_nand_data.gpmc_baseaddr = (void *)
-			(gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&devkit8000_nand_device) < 0)
+		if (gpmc_nand_init(&devkit8000_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -797,8 +784,6 @@ static void __init devkit8000_init(void)
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
@@ -814,17 +799,11 @@ static void __init devkit8000_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init devkit8000_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= devkit8000_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,