omap: consolidate touch screen initialization among different boards

Add common-board-devices.c that will contain the code for peripheral
devices initializatoin shared between multiple boards.
Start small with touchscreen initialization.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 6 insertions, 59 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 9afd087cc29c..3726465d34e3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -19,7 +19,6 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
@@ -48,6 +47,7 @@
 #include "hsmmc.h"
 #include "pm.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -123,58 +123,6 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
 	.rep		= 1,
 };
 
-static int ts_gpio;	/* Needed for ads7846_get_pendown_state */
-
-/**
- * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
- *
- * @return - void. If request gpio fails then Flag KERN_ERR.
- */
-static void ads7846_dev_init(void)
-{
-	if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-
-	gpio_direction_input(ts_gpio);
-	gpio_set_debounce(ts_gpio, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ts_gpio);
-}
-
-static struct ads7846_platform_data tsc2046_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-	.wakeup				= true,
-};
-
-
-static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
-	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
-};
-
-static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
-	[0] = {
-		/*
-		 * TSC2046 operates at a max freqency of 2MHz, so
-		 * operate slightly below at 1.5MHz
-		 */
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &tsc2046_mcspi_config,
-		.irq			= 0,
-		.platform_data		= &tsc2046_config,
-	},
-};
-
-
 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
 #define SDP3430_LCD_PANEL_ENABLE_GPIO		5
 
@@ -880,6 +828,8 @@ static struct omap_musb_board_data musb_board_data = {
 
 static void __init omap_3430sdp_init(void)
 {
+	int gpio_pendown;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
@@ -887,13 +837,10 @@ static void __init omap_3430sdp_init(void)
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
-		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
-		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
-	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
-	spi_register_board_info(sdp3430_spi_board_info,
-				ARRAY_SIZE(sdp3430_spi_board_info));
-	ads7846_dev_init();
+		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
+	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	board_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();