Merge tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.3-rc1.

  Not many major things, a number of driver updates and changes, and the
  8250 driver got split up a bit to make it easier to work with by
  moving some functions to a new file.  Full details are in the
  shortlog.

  All have been in linux-next with no reported issues"

* tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
  serial: imx: save and restore context in the suspend path
  serial: imx: allow waking up on RTSD
  serial: imx: introduce serial_imx_enable_wakeup()
  serial: imx: remove unbalanced clk_prepare
  serial: 8250: move rx_running out of the bitfield
  tty: serial: 8250_omap: do not use RX DMA if pause is not supported
  serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
  tty: serial: men_z135_uart.c: Don't initialize port->lock
  tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios()
  serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)
  serial: 8250: don't bind to SMSC IrCC IR port
  serial: mxs-auart: fix baud rate range
  serial: mxs-auart: keep the AUART unit in reset state when not in use
  serial: mxs-auart: use a function name to reflect what it really does
  serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512
  sc16is7xx: constify devtype
  sc16is7xx: support multiple devices
  sc16is7xx: save and use per-chip line number
  uart: pl011: Add support to ZTE ZX296702 uart
  uart: pl011: Improve LCRH register access decision
  ...

3 files changed, 11 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 90787aa2e648..e6e6142e33ac 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -22,6 +22,8 @@ Optional properties:
 		memory peripheral interface and USART DMA channel ID, FIFO configuration.
 		Refer to dma.txt and atmel-dma.txt for details.
 	- dma-names: "rx" for RX channel, "tx" for TX channel.
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+  capable USARTs.
 
 <chip> compatible description:
 - at91rm9200:  legacy USART support
@@ -57,4 +59,5 @@ Example:
 		dmas = <&dma0 2 0x3>,
 		       <&dma0 2 0x204>;
 		dma-names = "tx", "rx";
+		atmel,fifo-size = <32>;
 	};
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
index ebcbb62c0a76..51b3c9e80ad9 100644
--- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -6,7 +6,7 @@ Required properties:
 - interrupts: device interrupt
 
 Optional properties:
-- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD
   line respectively.
 
 Example:
@@ -16,4 +16,8 @@ serial@b00260000 {
 	reg = <0xb0026000 0x1000>;
 	interrupts = <68>;
 	status = "disabled";
+	dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>;
 };
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 54c2a155c783..7a71b5de77d6 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,6 +4,9 @@ Required properties:
 - compatible : should be "ti,omap2-uart" for OMAP2 controllers
 - compatible : should be "ti,omap3-uart" for OMAP3 controllers
 - compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- compatible : should be "ti,am4372-uart" for AM437x controllers
+- compatible : should be "ti,am3352-uart" for AM335x controllers
+- compatible : should be "ti,dra742-uart" for DRA7x controllers
 - reg : address and length of the register space
 - interrupts or interrupts-extended : Should contain the uart interrupt
                                       specifier or both the interrupt