dt: Move device tree documentation out of powerpc directory

The device tree is used by more than just PowerPC.  Make the documentation
directory available to all.

v2: reorganized files while moving to create arch and driver specific
    directories.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 0 insertions, 64 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
deleted file mode 100644
index 1eacd6b20ed5..000000000000
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* I2C
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
-   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
-   mpc5200 or mpc5200b. For the mpc5121, an additional node
-   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
-
-Recommended properties :
-
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
-   services interrupts for this device.
- - fsl,preserve-clocking : boolean; if defined, the clock settings
-   from the bootloader are preserved (not touched).
- - clock-frequency : desired I2C bus clock frequency in Hz.
- - fsl,timeout : I2C bus timeout in microseconds.
-
-Examples :
-
-	/* MPC5121 based board */
-	i2c@1740 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-		reg = <0x1740 0x20>;
-		interrupts = <11 0x8>;
-		interrupt-parent = <&ipic>;
-		clock-frequency = <100000>;
-	};
-
-	i2ccontrol@1760 {
-		compatible = "fsl,mpc5121-i2c-ctrl";
-		reg = <0x1760 0x8>;
-	};
-
-	/* MPC5200B based board */
-	i2c@3d00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-		reg = <0x3d00 0x40>;
-		interrupts = <2 15 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		fsl,preserve-clocking;
-	};
-
-	/* MPC8544 base board */
-	i2c@3100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
-		reg = <0x3100 0x100>;
-		interrupts = <43 2>;
-		interrupt-parent = <&mpic>;
-		clock-frequency = <400000>;
-		fsl,timeout = <10000>;
-	};