Merge branch 'master' into gfs2

2 files changed, 64 insertions, 3 deletions

diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index afac780445cd..dc942eaf490f 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -192,6 +192,17 @@ or, for backwards compatibility, the option value.  E.g.,
 arp_interval
 
 	Specifies the ARP link monitoring frequency in milliseconds.
+
+	The ARP monitor works by periodically checking the slave
+	devices to determine whether they have sent or received
+	traffic recently (the precise criteria depends upon the
+	bonding mode, and the state of the slave).  Regular traffic is
+	generated via ARP probes issued for the addresses specified by
+	the arp_ip_target option.
+
+	This behavior can be modified by the arp_validate option,
+	below.
+
 	If ARP monitoring is used in an etherchannel compatible mode
 	(modes 0 and 2), the switch should be configured in a mode
 	that evenly distributes packets across all links. If the
@@ -213,6 +224,54 @@ arp_ip_target
 	maximum number of targets that can be specified is 16.  The
 	default value is no IP addresses.
 
+arp_validate
+
+	Specifies whether or not ARP probes and replies should be
+	validated in the active-backup mode.  This causes the ARP
+	monitor to examine the incoming ARP requests and replies, and
+	only consider a slave to be up if it is receiving the
+	appropriate ARP traffic.
+
+	Possible values are:
+
+	none or 0
+
+		No validation is performed.  This is the default.
+
+	active or 1
+
+		Validation is performed only for the active slave.
+
+	backup or 2
+
+		Validation is performed only for backup slaves.
+
+	all or 3
+
+		Validation is performed for all slaves.
+
+	For the active slave, the validation checks ARP replies to
+	confirm that they were generated by an arp_ip_target.  Since
+	backup slaves do not typically receive these replies, the
+	validation performed for backup slaves is on the ARP request
+	sent out via the active slave.  It is possible that some
+	switch or network configurations may result in situations
+	wherein the backup slaves do not receive the ARP requests; in
+	such a situation, validation of backup slaves must be
+	disabled.
+
+	This option is useful in network configurations in which
+	multiple bonding hosts are concurrently issuing ARPs to one or
+	more targets beyond a common switch.  Should the link between
+	the switch and target fail (but not the switch itself), the
+	probe traffic generated by the multiple bonding instances will
+	fool the standard ARP monitor into considering the links as
+	still up.  Use of the arp_validate option can resolve this, as
+	the ARP monitor will only consider ARP requests and replies
+	associated with its own instance of bonding.
+
+	This option was added in bonding version 3.1.0.
+
 downdelay
 
 	Specifies the time, in milliseconds, to wait before disabling
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index c45daabd3bfe..74563b38ffd9 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -1,7 +1,6 @@
 DCCP protocol
 ============
 
-Last updated: 10 November 2005
 
 Contents
 ========
@@ -42,8 +41,11 @@ Socket options
 DCCP_SOCKOPT_PACKET_SIZE is used for CCID3 to set default packet size for
 calculations.
 
-DCCP_SOCKOPT_SERVICE sets the service. This is compulsory as per the
-specification. If you don't set it you will get EPROTO.
+DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
+service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
+the socket will fall back to 0 (which means that no meaningful service code
+is present). Connecting sockets set at most one service option; for
+listening sockets, multiple service codes can be specified.
 
 Notes
 =====