Merge tag 'iio-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st round of IIO new device support, features and cleanups in the 4.20 cycle.

There is a merge commit in here to pull in regmap support for repeatedly
reading the same register (to read out FIFOs).  Used by the adxl372 driver.
This will find uses elsewhere once we tidy up various drivers that are
effectively doing this and relying on not enabling regcache.

New device support
* Analog devices ADXL372 accelerometer
  - new driver for this accelerometer including fifo and and interrupt support.
    Follow up patches enforce trigger validation, add sampling frequency
    control and filter bandwidth control.  A later series added i2c support
    to the existing SPI support.
* ST lsm6dsx
  - rework and add support fo the LSM6DSO 6 axis mems sensor.
* Linear LTC 1660 DAC
  - new driver supporting the LTC 1660 and LTC 1665 SPI DACs.
* Microchip mcp3911 ADC.
  - new driver for this integrated analog front end and ADC.
* Qualcomm SPMI PMIC5 adc driver
  - using the spmi framework, new driver and bindings for this ADC.
    Follow up patch adds some missing channels.

Features
* ad5758
  - support hard reset using a gpio (if provided).
* mpu6050
  - Regulator support
* qcom-spmi-adc5
  - Sanity check the channel numbers provided by DT to make sure the
    driver actually knows about them.
* sc27xx
  - give raw data for channel 20 as it's used on all known boards for
    the headset which needs a custom converstion function.  If it turns
    out someone builds a board where this isn't true we will deal with it
    when it happens.
  - add ADC scale calibration.
* tsl2772
  - support device tree binding to set the proximity led settings.
  - regulator supprot.
  - binding for apds9930 - trivial addition as register compatible with tsl2772.

Cleanups / Minor fixes

* adxl345
  - supress a static checker warning but explicitly checking if the id
    object is null.
* bh1750
  - avoid CONFIG_PM_SLEEP checks.
  - SPDX.
* bme680
  - spelling mistake
  - use clamp rather than open coding.
  - white space and other similar fixes.
  - rename MSK to MASK for clarifty and use GENMASK to specify them.
  - use the FIELD_GET macro rather than a very odd accessor of dividing by
    16 to get the shift.
  - rework to share handing for oversampling of the various channels in a
    unified way.
  - check explicitly for val2 in write_raw function to ensure it is 0.
  - drop some field defines that don't add anything.
* dpot-adc
  - SPDX
* envelope detector
  - SPDX
* isl29501
  - fix an ancient compiler warning mostly because it results in much
    nicer code.
* max30102
  - mark switch fall throughs.
* max44000
  - drop an unused variable.
* max512
  - avoid CONFIG_PM_SLEEP checks.
* max5481
  - use of_device_get_match_data rather than open coding it.
* max5821
  - avoid CONFIG_PM_SLEEP checks.
* max9611
  - explicity cast an enum to an integer to make it totally clear that
    this is intended.
* mcp4018
  - fix an inconsistent MODULE_LICENSE.
  - use of_device_get_match_data rather than open coding it.
* mcp4531
  - use of_device_get_match_data rather than open coding it.
  - SPDX
* mcp4725
  - avoid CONFIG_PM_SLEEP checks.
* mcp4922
  - Fix error handling and prevent writing a negative to when setting the
    output voltage.
* ms5611
  - drop deprecated compatible strings without manufacturer from being
    explicitly listed.  They are handled anyway.
  - SPDX
* multiplexer
  - SPDX
* qcom-vadc
  - fix inconsistent documentation for reg.
* ti-dac5571
  - provide and of_match_table.

* treewide
  - update Michael Hennerich's email address.
  - Use %pOFn rather than device_node.name.
* documentation.
  - tidy up a wrong kernel version for the introduction of the
    position_relative ABI.

3 files changed, 94 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
new file mode 100644
index 000000000000..3071f48fb30b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
@@ -0,0 +1,30 @@
+* Microchip MCP3911 Dual channel analog front end (ADC)
+
+Required properties:
+ - compatible: Should be "microchip,mcp3911"
+ - reg: SPI chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+	 Documentation/devicetree/bindings/spi/spi-bus.txt.
+	 Max frequency for this chip is 20MHz.
+
+Optional properties:
+ - clocks: Phandle and clock identifier for sampling clock
+ - interrupt-parent: Phandle to the parent interrupt controller
+ - interrupts: IRQ line for the ADC
+ - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
+	same SPI bus. Valid values are 0-3. Defaults to 0.
+ - vref-supply: Phandle to the external reference voltage supply.
+
+Example:
+adc@0 {
+	compatible = "microchip,mcp3911";
+	reg = <0>;
+	interrupt-parent = <&gpio5>;
+	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+	spi-max-frequency = <20000000>;
+	microchip,device-addr = <0>;
+	vref-supply = <&vref_reg>;
+	clocks = <&xtal>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index 0fb46137f936..b3c86f4ac7cd 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -1,7 +1,9 @@
-Qualcomm's SPMI PMIC voltage ADC
+Qualcomm's SPMI PMIC ADC
 
-SPMI PMIC voltage ADC (VADC) provides interface to clients to read
-voltage. The VADC is a 15-bit sigma-delta ADC.
+- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+  voltage. The VADC is a 15-bit sigma-delta ADC.
+- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
+  voltage. The VADC is a 16-bit sigma-delta ADC.
 
 VADC node:
 
@@ -9,11 +11,13 @@ VADC node:
     Usage: required
     Value type: <string>
     Definition: Should contain "qcom,spmi-vadc".
+                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
+                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
 
 - reg:
     Usage: required
     Value type: <prop-encoded-array>
-    Definition: VADC base address and length in the SPMI PMIC register map.
+    Definition: VADC base address in the SPMI PMIC register map.
 
 - #address-cells:
     Usage: required
@@ -45,13 +49,26 @@ Channel node properties:
     Definition: ADC channel number.
             See include/dt-bindings/iio/qcom,spmi-vadc.h
 
+- label:
+    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
+    Value type: <empty>
+    Definition: ADC input of the platform as seen in the schematics.
+            For thermistor inputs connected to generic AMUX or GPIO inputs
+            these can vary across platform for the same pins. Hence select
+            the platform schematics name for this channel.
+
 - qcom,decimation:
     Usage: optional
     Value type: <u32>
     Definition: This parameter is used to decrease ADC sampling rate.
             Quicker measurements can be made by reducing decimation ratio.
-            Valid values are 512, 1024, 2048, 4096.
-            If property is not found, default value of 512 will be used.
+            - For compatible property "qcom,spmi-vadc", valid values are
+              512, 1024, 2048, 4096. If property is not found, default value
+              of 512 will be used.
+            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
+              and 840. If property is not found, default value of 840 is used.
+            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
+              512 and 1024. If property is not present, default value is 1024.
 
 - qcom,pre-scaling:
     Usage: optional
@@ -66,21 +83,38 @@ Channel node properties:
 - qcom,ratiometric:
     Usage: optional
     Value type: <empty>
-    Definition: Channel calibration type. If this property is specified
-            VADC will use the VDD reference (1.8V) and GND for channel
-            calibration. If property is not found, channel will be
-            calibrated with 0.625V and 1.25V reference channels, also
-            known as absolute calibration.
+    Definition: Channel calibration type.
+            - For compatible property "qcom,spmi-vadc", if this property is
+              specified VADC will use the VDD reference (1.8V) and GND for
+              channel calibration. If property is not found, channel will be
+              calibrated with 0.625V and 1.25V reference channels, also
+              known as absolute calibration.
+            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
+              if this property is specified VADC will use the VDD reference
+              (1.875V) and GND for channel calibration. If property is not found,
+              channel will be calibrated with 0V and 1.25V reference channels,
+              also known as absolute calibration.
 
 - qcom,hw-settle-time:
     Usage: optional
     Value type: <u32>
     Definition: Time between AMUX getting configured and the ADC starting
-            conversion. Delay = 100us * (value) for value < 11, and
-            2ms * (value - 10) otherwise.
-            Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
-            900 us and 1, 2, 4, 6, 8, 10 ms
-            If property is not found, channel will use 0us.
+            conversion. The 'hw_settle_time' is an index used from valid values
+            and programmed in hardware to achieve the hardware settling delay.
+            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
+              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
+              and 2ms * (hw_settle_time - 10) otherwise.
+              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
+              900 us and 1, 2, 4, 6, 8, 10 ms.
+              If property is not found, channel will use 0us.
+            - For compatible property "qcom,spmi-adc5", delay = 15us for
+              value 0, 100us * (value) for values < 11,
+              and 2ms * (value - 10) otherwise.
+              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
+              900 us and 1, 2, 4, 6, 8, 10 ms
+              Certain controller digital versions have valid values of
+              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
+              If property is not found, channel will use 15us.
 
 - qcom,avg-samples:
     Usage: optional
@@ -89,13 +123,18 @@ Channel node properties:
             Averaging provides the option to obtain a single measurement
             from the ADC that is an average of multiple samples. The value
             selected is 2^(value).
-            Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
-            If property is not found, 1 sample will be used.
+            - For compatible property "qcom,spmi-vadc", valid values
+              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
+              If property is not found, 1 sample will be used.
+            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
+              valid values are: 1, 2, 4, 8, 16
+              If property is not found, 1 sample will be used.
 
 NOTE:
 
-Following channels, also known as reference point channels, are used for
-result calibration and their channel configuration nodes should be defined:
+For compatible property "qcom,spmi-vadc" following channels, also known as
+reference point channels, are used for result calibration and their channel
+configuration nodes should be defined:
 VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
 VADC_GND_REF and VADC_VDD_VADC.
 
@@ -104,7 +143,7 @@ Example:
 	/* VADC node */
 	pmic_vadc: vadc@3100 {
 		compatible = "qcom,spmi-vadc";
-		reg = <0x3100 0x100>;
+		reg = <0x3100>;
 		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
index 8aad960de50b..b4daa15dcf15 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
@@ -12,6 +12,8 @@ Required properties:
 - interrupts: The interrupt number for the ADC device.
 - #io-channel-cells: Number of cells in an IIO specifier.
 - hwlocks: Reference to a phandle of a hwlock provider node.
+- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
+- nvmem-cell-names: Should be "big_scale_calib", "small_scale_calib".
 
 Example:
 
@@ -32,5 +34,7 @@ Example:
 			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			#io-channel-cells = <1>;
 			hwlocks = <&hwlock 4>;
+			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
 		};
 	};