Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

6 files changed, 125 insertions, 606 deletions

diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index bd0c8416a5c8..0045433eae1f 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -9,6 +9,9 @@ Required properties:
 	"altr,socfpga-pll-clock" - for a PLL clock
 	"altr,socfpga-perip-clock" - The peripheral clock divided from the
 		PLL clock.
+	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+		can get gated.
+
 - reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
 - clocks : shall be the input parent clock phandle for the clock. This is
 	either an oscillator or a pll output.
@@ -16,3 +19,7 @@ Required properties:
 
 Optional properties:
 - fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+        and the bit index.
+- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
+        and width.
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index ea5e26f16aec..14d5c2af26f4 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -102,6 +102,7 @@ Exynos4 SoC and this is specified where applicable.
   sclk_spi0_isp       174     Exynos4x12
   sclk_spi1_isp       175     Exynos4x12
   sclk_uart_isp       176     Exynos4x12
+  sclk_fimg2d         177
 
 	      [Peripheral Clock Gates]
 
@@ -129,7 +130,7 @@ Exynos4 SoC and this is specified where applicable.
   smmu_mfcl           274
   smmu_mfcr           275
   g3d                 276
-  g2d                 277     Exynos4210
+  g2d                 277
   rotator             278     Exynos4210
   mdma                279     Exynos4210
   smmu_g2d            280     Exynos4210
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
index d6cb083b90a2..0c80c2677104 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -12,253 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
-
-  The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 160 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
-  above.
-
-  0	unassigned
-  1	unassigned
-  2	unassigned
-  3	unassigned
-  4	rtc
-  5	timer
-  6	uarta
-  7	unassigned	(register bit affects uartb and vfir)
-  8	unassigned
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	unassigned
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	unassigned
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	i2s0
-  31	unassigned
-
-  32	unassigned
-  33	unassigned
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	unassigned
-  38	unassigned
-  39	unassigned	(register bit affects fuse and fuse_burn)
-  40	kfuse
-  41	sbc1
-  42	nor
-  43	unassigned
-  44	sbc2
-  45	unassigned
-  46	sbc3
-  47	i2c5
-  48	dsia
-  49	unassigned
-  50	mipi
-  51	hdmi
-  52	csi
-  53	unassigned
-  54	i2c2
-  55	uartc
-  56	mipi-cal
-  57	emc
-  58	usb2
-  59	usb3
-  60	msenc
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	unassigned
-  65	uartd
-  66	unassigned
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	unassigned
-  71	owr
-  72	afi
-  73	csite
-  74	unassigned
-  75	unassigned
-  76	la
-  77	trace
-  78	soc_therm
-  79	dtv
-  80	ndspeed
-  81	i2cslow
-  82	dsib
-  83	tsec
-  84	unassigned
-  85	unassigned
-  86	unassigned
-  87	unassigned
-  88	unassigned
-  89	xusb_host
-  90	unassigned
-  91	msenc
-  92	csus
-  93	unassigned
-  94	unassigned
-  95	unassigned	(bit affects xusb_dev and xusb_dev_src)
-
-  96	unassigned
-  97	unassigned
-  98	unassigned
-  99	mselect
-  100	tsensor
-  101	i2s3
-  102	i2s4
-  103	i2c4
-  104	sbc5
-  105	sbc6
-  106	d_audio
-  107	apbif
-  108	dam0
-  109	dam1
-  110	dam2
-  111	hda2codec_2x
-  112	unassigned
-  113	audio0_2x
-  114	audio1_2x
-  115	audio2_2x
-  116	audio3_2x
-  117	audio4_2x
-  118	spdif_2x
-  119	actmon
-  120	extern1
-  121	extern2
-  122	extern3
-  123	unassigned
-  124	unassigned
-  125	hda
-  126	unassigned
-  127	se
-
-  128	hda2hdmi
-  129	unassigned
-  130	unassigned
-  131	unassigned
-  132	unassigned
-  133	unassigned
-  134	unassigned
-  135	unassigned
-  136	unassigned
-  137	unassigned
-  138	unassigned
-  139	unassigned
-  140	unassigned
-  141	unassigned
-  142	unassigned
-  143	unassigned	(bit affects xusb_falcon_src, xusb_fs_src,
-			 xusb_host_src and xusb_ss_src)
-  144	cilab
-  145	cilcd
-  146	cile
-  147	dsialp
-  148	dsiblp
-  149	unassigned
-  150	dds
-  151	unassigned
-  152	dp2
-  153	amx
-  154	adx
-  155	unassigned	(bit affects dfll_ref and dfll_soc)
-  156	xusb_ss
-
-  192	uartb
-  193	vfir
-  194	spdif_in
-  195	spdif_out
-  196	vi
-  197	vi_sensor
-  198	fuse
-  199	fuse_burn
-  200	clk_32k
-  201	clk_m
-  202	clk_m_div2
-  203	clk_m_div4
-  204	pll_ref
-  205	pll_c
-  206	pll_c_out1
-  207	pll_c2
-  208	pll_c3
-  209	pll_m
-  210	pll_m_out1
-  211	pll_p
-  212	pll_p_out1
-  213	pll_p_out2
-  214	pll_p_out3
-  215	pll_p_out4
-  216	pll_a
-  217	pll_a_out0
-  218	pll_d
-  219	pll_d_out0
-  220	pll_d2
-  221	pll_d2_out0
-  222	pll_u
-  223	pll_u_480M
-  224	pll_u_60M
-  225	pll_u_48M
-  226	pll_u_12M
-  227	pll_x
-  228	pll_x_out0
-  229	pll_re_vco
-  230	pll_re_out
-  231	pll_e_out0
-  232	spdif_in_sync
-  233	i2s0_sync
-  234	i2s1_sync
-  235	i2s2_sync
-  236	i2s3_sync
-  237	i2s4_sync
-  238	vimclk_sync
-  239	audio0
-  240	audio1
-  241	audio2
-  242	audio3
-  243	audio4
-  244	spdif
-  245	clk_out_1
-  246	clk_out_2
-  247	clk_out_3
-  248	blink
-  252	xusb_host_src
-  253	xusb_falcon_src
-  254	xusb_fs_src
-  255	xusb_ss_src
-  256	xusb_dev_src
-  257	xusb_dev
-  258	xusb_hs_src
-  259	sclk
-  260	hclk
-  261	pclk
-  262	cclk_g
-  263	cclk_lp
-  264	dfll_ref
-  265	dfll_soc
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra114-car.h>.
 
 Example SoC include file:
 
@@ -270,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA114_CLK_USB2>;
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index e885680f6b45..fcfed5bf73fb 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -12,155 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
-
-  The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 95 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 96 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	ac97
-  4	rtc
-  5	tmr
-  6	uart1
-  7	unassigned	(register bit affects uart2 and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	twc
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	ide
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	unassigned
-  31	cache2
-
-  32	mem
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	stat_mon
-  38	pmc
-  39	fuse
-  40	kfuse
-  41	sbc1
-  42	snor
-  43	spi1
-  44	sbc2
-  45	xio
-  46	sbc3
-  47	dvc
-  48	dsi
-  49	unassigned	(register bit affects tvo and cve)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uart3
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uart4
-  66	uart5
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	unassigned
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	unassigned
-  80	unassigned
-  81	unassigned
-  82	unassigned
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	audio_2x	a/k/a audio_2x_sync_clk
-  90	clk_d
-  91	unassigned
-  92	sus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	uart2
-  97	vfir
-  98	spdif_in
-  99	spdif_out
-  100	vi
-  101	vi_sensor
-  102	tvo
-  103	cve
-  104	osc
-  105	clk_32k		a/k/a clk_s
-  106	clk_m
-  107	sclk
-  108	cclk
-  109	hclk
-  110	pclk
-  111	blink
-  112	pll_a
-  113	pll_a_out0
-  114	pll_c
-  115	pll_c_out1
-  116	pll_d
-  117	pll_d_out0
-  118	pll_e
-  119	pll_m
-  120	pll_m_out1
-  121	pll_p
-  122	pll_p_out1
-  123	pll_p_out2
-  124	pll_p_out3
-  125	pll_p_out4
-  126	pll_s
-  127	pll_u
-  128	pll_x
-  129	cop		a/k/a avp
-  130	audio		a/k/a audio_sync_clk
-  131	pll_ref
-  132	twd
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra20-car.h>.
 
 Example SoC include file:
 
@@ -172,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index f3da3be5fcad..0f714081e986 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -12,212 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
-
-  The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 160 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	unassigned
-  4	rtc
-  5	timer
-  6	uarta
-  7	unassigned	(register bit affects uartb and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	unassigned
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	unassigned
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	i2s0
-  31	cop_cache
-
-  32	mc
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	statmon
-  38	pmc
-  39	unassigned	(register bit affects fuse and fuse_burn)
-  40	kfuse
-  41	sbc1
-  42	nor
-  43	unassigned
-  44	sbc2
-  45	unassigned
-  46	sbc3
-  47	i2c5
-  48	dsia
-  49	unassigned	(register bit affects cve and tvo)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uartc
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uartd
-  66	uarte
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	pciex
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	dtv
-  80	ndspeed
-  81	i2cslow
-  82	dsib
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	unassigned
-  90	audio_2x	a/k/a audio_2x_sync_clk
-  91	unassigned
-  92	csus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	cpu_g
-  97	cpu_lp
-  98	3d2
-  99	mselect
-  100	tsensor
-  101	i2s3
-  102	i2s4
-  103	i2c4
-  104	sbc5
-  105	sbc6
-  106	d_audio
-  107	apbif
-  108	dam0
-  109	dam1
-  110	dam2
-  111	hda2codec_2x
-  112	atomics
-  113	audio0_2x
-  114	audio1_2x
-  115	audio2_2x
-  116	audio3_2x
-  117	audio4_2x
-  118	audio5_2x
-  119	actmon
-  120	extern1
-  121	extern2
-  122	extern3
-  123	sata_oob
-  124	sata
-  125	hda
-  127	se
-  128	hda2hdmi
-  129	sata_cold
-
-  160	uartb
-  161	vfir
-  162	spdif_in
-  163	spdif_out
-  164	vi
-  165	vi_sensor
-  166	fuse
-  167	fuse_burn
-  168	cve
-  169	tvo
-
-  170	clk_32k
-  171	clk_m
-  172	clk_m_div2
-  173	clk_m_div4
-  174	pll_ref
-  175	pll_c
-  176	pll_c_out1
-  177	pll_m
-  178	pll_m_out1
-  179	pll_p
-  180	pll_p_out1
-  181	pll_p_out2
-  182	pll_p_out3
-  183	pll_p_out4
-  184	pll_a
-  185	pll_a_out0
-  186	pll_d
-  187	pll_d_out0
-  188	pll_d2
-  189	pll_d2_out0
-  190	pll_u
-  191	pll_x
-  192	pll_x_out0
-  193	pll_e
-  194	spdif_in_sync
-  195	i2s0_sync
-  196	i2s1_sync
-  197	i2s2_sync
-  198	i2s3_sync
-  199	i2s4_sync
-  200	vimclk
-  201	audio0
-  202	audio1
-  203	audio2
-  204	audio3
-  205	audio4
-  206	audio5
-  207	clk_out_1 (extern1)
-  208	clk_out_2 (extern2)
-  209	clk_out_3 (extern3)
-  210	sclk
-  211	blink
-  212	cclk_g
-  213	cclk_lp
-  214	twd
-  215	cml0
-  216	cml1
-  217	hclk
-  218	pclk
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra30-car.h>.
 
 Example SoC include file:
 
@@ -229,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt
new file mode 100644
index 000000000000..7fc09773de46
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt
@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+  i.e. the driver output for the slow 32kHz chrystal, if the
+  board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+  i.e. the driver output for the main (~19.2 MHz) chrystal,
+  if the board has its own circuitry for providing this
+  osciallator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+  this table:
+
+	0:  HCLKDMA0
+	1:  HCLKSMC
+	2:  HCLKSDRAM
+	3:  HCLKDMA1
+	4:  HCLKCLCD
+	5:  PCLKIRDA
+	6:  PCLKSSP
+	7:  PCLKUART0
+	8:  PCLKSDI
+	9:  PCLKI2C0
+	10: PCLKI2C1
+	11: PCLKUART1
+	12: PCLMSP0
+	13: HCLKUSB
+	14: HCLKDIF
+	15: HCLKSAA
+	16: HCLKSVA
+	17: PCLKHSI
+	18: PCLKXTI
+	19: PCLKUART2
+	20: PCLKMSP1
+	21: PCLKMSP2
+	22: PCLKOWM
+	23: HCLKHPI
+	24: PCLKSKE
+	25: PCLKHSEM
+	26: HCLK3D
+	27: HCLKHASH
+	28: HCLKCRYP
+	29: PCLKMSHC
+	30: HCLKUSBM
+	31: HCLKRNG
+	(32, 33, 34, 35 RESERVED)
+	36: CLDCLK
+	37: IRDACLK
+	38: SSPICLK
+	39: UART0CLK
+	40: SDICLK
+	41: I2C0CLK
+	42: I2C1CLK
+	43: UART1CLK
+	44: MSPCLK0
+	45: USBCLK
+	46: DIFCLK
+	47: IPI2CCLK
+	48: IPBMCCLK
+	49: HSICLKRX
+	50: HSICLKTX
+	51: UART2CLK
+	52: MSPCLK1
+	53: MSPCLK2
+	54: OWMCLK
+	(55 RESERVED)
+	56: SKECLK
+	(57 RESERVED)
+	58: 3DCLK
+	59: PCLKMSP3
+	60: MSPCLK3
+	61: MSHCCLK
+	62: USBMCLK
+	63: RNGCCLK