BMC/Intel-BMC/linux.git/virt, branch v5.4.19

KVM: Play nice with read-only memslots when querying host page size

2020-02-11T12:35:54+00:00

[ Upstream commit 42cde48b2d39772dba47e680781a32a6c4b7dc33 ] Avoid the "writable" check in __gfn_to_hva_many(), which will always fail on read-only memslots due to gfn_to_hva() assuming writes. Functionally, this allows x86 to create large mappings for read-only memslots that are backed by HugeTLB mappings. Note, the changelog for commit 05da45583de9 ("KVM: MMU: large page support") states "If the largepage contains write-protected pages, a large pte is not used.", but "write-protected" refers to pages that are temporarily read-only, e.g. read-only memslots didn't even exist at the time. Fixes: 4d8b81abc47b ("KVM: introduce readonly memslot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson [Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: Use vcpu-specific gva->hva translation when querying host page size

2020-02-11T12:35:54+00:00

[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM

2020-02-11T12:35:53+00:00

[ Upstream commit 736c291c9f36b07f8889c61764c28edce20e715d ] Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

x86/kvm: Cache gfn to pfn translation

2020-02-11T12:35:40+00:00

commit 917248144db5d7320655dbb41d3af0b8a0f3d589 upstream. __kvm_map_gfn()'s call to gfn_to_pfn_memslot() is * relatively expensive * in certain cases (such as when done from atomic context) cannot be called Stashing gfn-to-pfn mapping should help with both cases. This is part of CVE-2019-3016. Signed-off-by: Boris Ostrovsky Reviewed-by: Joao Martins Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

x86/kvm: Introduce kvm_(un)map_gfn()

2020-02-11T12:35:40+00:00

commit 1eff70a9abd46f175defafd29bc17ad456f398a7 upstream. kvm_vcpu_(un)map operates on gfns from any current address space. In certain cases we want to make sure we are not mapping SMRAM and for that we can use kvm_(un)map_gfn() that we are introducing in this patch. This is part of CVE-2019-3016. Signed-off-by: Boris Ostrovsky Reviewed-by: Joao Martins Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

KVM: arm64: Only sign-extend MMIO up to register width

2020-02-11T12:35:16+00:00

commit b6ae256afd32f96bec0117175b329d0dd617655e upstream. On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit register, and we should only sign extend the register up to the width of the register as specified in the operation (by using the 32-bit Wn or 64-bit Xn register specifier). As it turns out, the architecture provides this decoding information in the SF ("Sixty-Four" -- how cute...) bit. Let's take advantage of this with the usual 32-bit/64-bit header file dance and do the right thing on AArch64 hosts. Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: Correct AArch32 SPSR on exception entry

2020-02-11T12:35:16+00:00

commit 1cfbb484de158e378e8971ac40f3082e53ecca55 upstream. Confusingly, there are three SPSR layouts that a kernel may need to deal with: (1) An AArch64 SPSR_ELx view of an AArch64 pstate (2) An AArch64 SPSR_ELx view of an AArch32 pstate (3) An AArch32 SPSR_* view of an AArch32 pstate When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions match the AArch32 SPSR_* view. However, when we inject an exception into an AArch32 guest, we have to synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64 host needs to synthesize layout #3 from layout #2. This patch adds a new host_spsr_to_spsr32() helper for this, and makes use of it in the KVM AArch32 support code. For arm64 we need to shuffle the DIT bit around, and remove the SS bit, while for arm we can use the value as-is. I've open-coded the bit manipulation for now to avoid having to rework the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_* definitions. I hope to perform a more thorough refactoring in future so that we can handle pstate view manipulation more consistently across the kernel tree. Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier Reviewed-by: Alexandru Elisei Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: Correct CPSR on exception entry

2020-02-11T12:35:16+00:00

commit 3c2483f15499b877ccb53250d88addb8c91da147 upstream. When KVM injects an exception into a guest, it generates the CPSR value from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other bits to zero. This isn't correct, as the architecture specifies that some CPSR bits are (conditionally) cleared or set upon an exception, and others are unchanged from the original context. This patch adds logic to match the architectural behaviour. To make this simple to follow/audit/extend, documentation references are provided, and bits are configured in order of their layout in SPSR_EL2. This layout can be seen in the diagram on ARM DDI 0487E.a page C5-426. Note that this code is used by both arm and arm64, and is intended to fuction with the SPSR_EL2 and SPSR_HYP layouts. Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier Reviewed-by: Alexandru Elisei Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: Properly handle faulting of device mappings

2019-12-31T15:46:24+00:00

commit 6d674e28f642e3ff676fbae2d8d1b872814d32b6 upstream. A device mapping is normally always mapped at Stage-2, since there is very little gain in having it faulted in. Nonetheless, it is possible to end-up in a situation where the device mapping has been removed from Stage-2 (userspace munmaped the VFIO region, and the MMU notifier did its job), but present in a userspace mapping (userpace has mapped it back at the same address). In such a situation, the device mapping will be demand-paged as the guest performs memory accesses. This requires to be careful when dealing with mapping size, cache management, and to handle potential execution of a device mapping. Reported-by: Alexandru Elisei Signed-off-by: Marc Zyngier Tested-by: Alexandru Elisei Reviewed-by: James Morse Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: vgic: Don't rely on the wrong pending table

2019-12-13T07:43:00+00:00

commit ca185b260951d3b55108c0b95e188682d8a507b7 upstream. It's possible that two LPIs locate in the same "byte_offset" but target two different vcpus, where their pending status are indicated by two different pending tables. In such a scenario, using last_byte_offset optimization will lead KVM relying on the wrong pending table entry. Let us use last_ptr instead, which can be treated as a byte index into a pending table and also, can be vcpu specific. Fixes: 280771252c1b ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES") Cc: stable@vger.kernel.org Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Acked-by: Eric Auger Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman