BMC/Intel-BMC/linux.git/tools, branch dev-5.14-intel

selftests: KVM: Align SMCCC call with the spec in steal_time

2021-10-09T13:02:41+00:00

[ Upstream commit 01f91acb55be7aac3950b89c458bcea9ef6e4f49 ] The SMC64 calling convention passes a function identifier in w0 and its parameters in x1-x17. Given this, there are two deviations in the SMC64 call performed by the steal_time test: the function identifier is assigned to a 64 bit register and the parameter is only 32 bits wide. Align the call with the SMCCC by using a 32 bit register to handle the function identifier and increasing the parameter width to 64 bits. Suggested-by: Andrew Jones Signed-off-by: Oliver Upton Reviewed-by: Andrew Jones Message-Id: <20210921171121.2148982-3-oupton@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

tools/vm/page-types: remove dependency on opt_file for idle page tracking

2021-10-09T13:02:41+00:00

[ Upstream commit ebaeab2fe87987cef28eb5ab174c42cd28594387 ] Idle page tracking can also be used for process address space, not only file mappings. Without this change, using with '-i' option for process address space encounters below errors reported. $ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ... Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses

2021-10-09T13:02:41+00:00

[ Upstream commit 5ba1071f7554c4027bdbd712a146111de57918de ] Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as these are forms of undefined behavior: "A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined." (from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf) These problems were identified using the undefined behavior sanitizer (ubsan) with the tools version of the code and perf test. [ bp: Massage commit message. ] Signed-off-by: Numfor Mbiziwo-Tiapo Signed-off-by: Ian Rogers Signed-off-by: Borislav Petkov Acked-by: Masami Hiramatsu Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com Signed-off-by: Sasha Levin

selftests: kvm: fix get_run_delay() ignoring fscanf() return warn

2021-10-09T13:02:40+00:00

[ Upstream commit f5013d412a43662b63f3d5f3a804d63213acd471 ] Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it. lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: kvm: move get_run_delay() into lib/test_util

2021-10-09T13:02:40+00:00

[ Upstream commit 20175d5eac5bb94a7a3719ef275337fc9abf26ac ] get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication. Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn

2021-10-09T13:02:40+00:00

[ Upstream commit 3a4f0cc693cd3d80e66a255f0bff0e2c0461eef1 ] Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning: lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn

2021-10-09T13:02:40+00:00

[ Upstream commit 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 ] Fix get_warnings_count() to check fscanf() return value to get rid of the following warning: x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: be sure to make khdr before other targets

2021-10-09T13:02:40+00:00

[ Upstream commit 8914a7a247e065438a0ec86a58c1c359223d2c9e ] LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li Reported-by: kernel test robot Signed-off-by: Li Zhijian Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

usb: testusb: Fix for showing the connection speed

2021-10-09T13:02:39+00:00

[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ] testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed. sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs Signed-off-by: Faizel K B Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

objtool: print out the symbol type when complaining about it

2021-10-07T05:53:19+00:00

commit 7fab1c12bde926c5a8c7d5984c551d0854d7e0b3 upstream. The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman