BMC/Intel-BMC/linux.git/tools/testing, branch dev-5.15-intel

selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets

2022-04-27T12:38:55+00:00

[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ] The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set

2022-04-20T07:34:12+00:00

[ Upstream commit ce64763c63854b4079f2e036638aa881a1fb3fbc ] The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed. Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases. Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests: cgroup: Test open-time cgroup namespace usage for migration checks

2022-04-13T18:59:27+00:00

commit bf35a7879f1dfb0d050fe779168bcf25c7de66f5 upstream. When a task is writing to an fd opened by a different task, the perm check should use the cgroup namespace of the latter task. Add a test for it. Tested-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

selftests: cgroup: Test open-time credential usage for migration checks

2022-04-13T18:59:27+00:00

commit 613e040e4dc285367bff0f8f75ea59839bc10947 upstream. When a task is writing to an fd opened by a different task, the perm check should use the credentials of the latter task. Add a test for it. Tested-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644

2022-04-13T18:59:27+00:00

commit b09c2baa56347ae65795350dfcc633dedb1c2970 upstream. 0644 is an odd perm to create a cgroup which is a directory. Use the regular 0755 instead. This is necessary for euid switching test case. Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Fix u8 narrow load checks for bpf_sk_lookup remote_port

2022-04-13T18:59:25+00:00

commit 3c69611b8926f8e74fcf76bd97ae0e5dafbeb26a upstream. In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to __be16. However, narrow load tests which exercise 1-byte sized loads from offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the change. As a result, on little-endian we continue testing loads from addresses: - (__u8 *)&ctx->remote_port + 3 - (__u8 *)&ctx->remote_port + 4 which map to the zero padding following the remote_port field, and don't break the tests because there is no observable change. While on big-endian, we observe breakage because tests expect to see zeros for values loaded from: - (__u8 *)&ctx->remote_port - 1 - (__u8 *)&ctx->remote_port - 2 Above addresses map to ->remote_ip6 field, which precedes ->remote_port, and are populated during the bpf_sk_lookup IPv6 tests. Unsurprisingly, on s390x we observe: #136/38 sk_lookup/narrow access to ctx v4:OK #136/39 sk_lookup/narrow access to ctx v6:FAIL Fix it by removing the checks for 1-byte loads from offsets outside of the ->remote_port field. Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide") Suggested-by: Ilya Leoshkevich Signed-off-by: Jakub Sitnicki Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com Signed-off-by: Greg Kroah-Hartman

Revert "selftests: net: Add tls config dependency for tls selftests"

2022-04-13T18:59:25+00:00

commit 20695e9a9fd39103d1b0669470ae74030b7aa196 upstream. This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47. The test is supposed to run cleanly with TLS is disabled, to test compatibility with TCP behavior. I can't repro the failure [1], the problem should be debugged rather than papered over. Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests") Signed-off-by: Jakub Kicinski Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

selftests: net: Add tls config dependency for tls selftests

2022-04-13T18:59:13+00:00

[ Upstream commit d9142e1cf3bbdaf21337767114ecab26fe702d47 ] selftest net tls test cases need TLS=m without this the test hangs. Enabling config TLS solves this problem and runs to complete. - CONFIG_TLS=m Reported-by: Linux Kernel Functional Testing Signed-off-by: Naresh Kamboju Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

torture: Make torture.sh help message match reality

2022-04-08T12:24:16+00:00

commit f233673cd32a048f2eed69e56b61174c33fb740b upstream. This commit fixes a couple of typos: s/--doall/--do-all/ and s/--doallmodconfig/--do-allmodconfig/. [ paulmck: Add Fixes: supplied by Paul Menzel. ] Fixes: a115a775a8d5 ("torture: Add "make allmodconfig" to torture.sh") Reported-by: Paul Menzel Signed-off-by: Paul E. McKenney Signed-off-by: Greg Kroah-Hartman

af_unix: Support POLLPRI for OOB.

2022-04-08T12:24:14+00:00

commit d9a232d435dcc966738b0f414a86f7edf4f4c8c4 upstream. The commit 314001f0bf92 ("af_unix: Add OOB support") introduced OOB for AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing piece. In the selftest, normal datagrams are sent followed by OOB data, so this commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test case. Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman