BMC/Intel-BMC/linux.git/tools/testing/selftests/net/forwarding, branch dev-5.4

selftests: forwarding: vxlan_bridge_1d: use more proper tos value

2020-03-12T12:00:17+00:00

[ Upstream commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 ] 0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: fix tos value

2020-03-12T12:00:12+00:00

[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ] After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing

2020-03-12T12:00:12+00:00

[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ] For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu Reviewed-by: Petr Machata Tested-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

selftests: loopback.sh: skip this test if the driver does not support

2020-01-17T18:48:20+00:00

commit cc7e3f63d7299dd1119be39aa187b867d6f8aa17 upstream. The loopback feature is only supported on a few drivers like broadcom, mellanox, etc. The default veth driver has not supported it yet. To avoid returning failed and making the runner feel confused, let's just skip the test on drivers that not support loopback. Fixes: ad11340994d5 ("selftests: Add loopback test") Signed-off-by: Hangbin Liu Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Delete IPv6 address at the end

2019-12-31T15:41:36+00:00

[ Upstream commit 65cb13986229cec02635a1ecbcd1e2dd18353201 ] When creating the second host in h2_create(), two addresses are assigned to the interface, but only one is deleted. When running the test twice in a row the following error is observed: $ ./router_bridge_vlan.sh TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] $ ./router_bridge_vlan.sh RTNETLINK answers: File exists TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] Fix this by deleting the address during cleanup. Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface") Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: devlink_lib: Add devlink-trap helpers

2019-08-17T19:40:09+00:00

Add helpers to interact with devlink-trap, such as setting the action of a trap and retrieving statistics. Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: forwarding: devlink_lib: Allow tests to define devlink device

2019-08-17T19:40:09+00:00

For tests that create their network interfaces dynamically or do not use interfaces at all (as with netdevsim) it is useful to define their own devlink device instead of deriving it from the first network interface. Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

selftests: net: push jq workaround into separate helper

2019-08-15T19:01:21+00:00

Push the jq return value workaround code into a separate helper so it could be used by the rest of the code. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

selftests: forwarding: gre_multipath: Fix flower filters

2019-07-23T20:06:48+00:00

The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323db3a ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by: Ido Schimmel Reported-by: Stephen Suryaputra Tested-by: Stephen Suryaputra Signed-off-by: David S. Miller

selftests: forwarding: gre_multipath: Enable IPv4 forwarding

2019-07-23T20:06:48+00:00

The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling") Signed-off-by: Ido Schimmel Reported-by: Stephen Suryaputra Tested-by: Stephen Suryaputra Signed-off-by: David S. Miller