BMC/Intel-BMC/linux.git/tools/perf/ui/browsers/annotate.c, branch dev-4.3

perf ui browser: Introduce ui_browser__printf()

2015-08-12T13:27:05+00:00

To remove direct access to libslang functions, with the immediate goal of implementing horizontal scrolling at the ui_browser level, but also because we may at some point want to implement ui_browser with other UIs in addition to the current libslang implementation. Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ui browser: Introduce ui_browser__write_nstring()

2015-08-12T13:27:04+00:00

To remove direct access to libslang functions, with the immediate goal of implementing horizontal scrolling at the ui_browser level, but also because we may at some point want to implement ui_browser with other UIs in addition to the current libslang implementation. Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Namhyung Kim Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Finally display IPC and cycle accounting

2015-08-06T19:37:22+00:00

Add two new columns to the annotate display and display the average cycles and the compute IPC if available. When the LBR was not in any branch mode the IPC computation is automatically disabled. We still display the cycle information. Example output (with made up numbers): The second column is the IPC and third average cycles. │ __attribute__((noinline)) f2() │ { 5.15 0.07 │ push %rbp 0.01 0.07 │ mov %rsp,%rbp │ c = a / b; 9.87 0.07 │ mov a,%eax 0.07 │ mov b,%ecx 0.07 │ cltd 4.92 0.07 123│ idiv %ecx 70.79 0.07 │ mov %eax,__TMC_END__ │ } 9.25 0.07 │ pop %rbp 0.01 0.07 123│ ← retq v2: Fix display problems. Signed-off-by: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Compute IPC and basic block cycles

2015-08-06T19:36:12+00:00

Compute the IPC and the basic block cycles for the annotate display. IPC is computed by counting the instructions, and then dividing the accounted cycles by that count. The actual IPC computation can only be done at annotate time, because we need to parse the objdump output first to know the number of instructions in the basic block. The cycles/IPC are also put into the perf function annotation so that the display code can show them. Again basic block overlaps are not handled, with the longest winning, but there are some heuristics to hide the IPC when the longest is not the most common. v2: Compute IPC correctly. Signed-off-by: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Display total number of samples with --show-total-period

2015-06-19T19:39:18+00:00

To compare two records on an instruction base, with --show-total-period option provided, display total number of samples that belong to a line in assembly language. New hot key 't' is introduced for 'perf annotate' TUI. Signed-off-by: Martin Liska Cc: Andi Kleen Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Make Ctrl-C stop processing on TUI

2015-05-29T15:49:00+00:00

It was inconvenient that perf cannot be quit with SIGINT during processing samples on TUI especially for large data files. This was because the first argument of SLang_init_tty(), abort_char, being 0. The manual says it's the ascii value of the control character that will be used to generate the interrupt signal [1]. Passing -1 means to use the default value (Ctrl-C). However, after processing samples, Ctrl-C was used to in other cases as well - like stepping back from annotate. So recover the original behavior after processing. [1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1 Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf hists browser: Allow annotating entries in callchains

2015-03-17T21:27:28+00:00

Instead of annotating just the top level hist_entry, allow instead annotating a map_symbol, i.e. the top level hist_entry or one of the callchains for which there were samples. Suggested-by: Stephane Eranian Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/n/tip-k1zxj5564je9jei4yd15ouwn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove EOL whitespaces

2015-01-21T16:24:31+00:00

Janitorial stuff: boredom moment. Cc: Adrian Hunter Cc: Borislav Petkov Cc: David Ahern Cc: Don Zickus Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-u70i7shys3kths4hzru72bha@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Support source line numbers in annotate

2014-11-19T15:33:48+00:00

With srcline key/sort'ing it's useful to have line numbers in the annotate window. This patch implements this. Use objdump -l to request the line numbers and save them in the line structure. Then the browser displays them for source lines. The line numbers are not displayed by default, but can be toggled on with 'k' There is one unfortunate problem with this setup. For lines not containing source and which are outside functions objdump -l reports line numbers off by a few: it always reports the first line number in the next function even for lines that are outside the function. I haven't found a nice way to detect/correct this. Probably objdump has to be fixed. See https://sourceware.org/bugzilla/show_bug.cgi?id=16433 The line numbers are still useful even with these problems, as most are correct and the ones which are not are nearby. v2: Fix help text. Handle (discriminator...) output in objdump. Left align the line numbers. Signed-off-by: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1415844328-4884-9-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Another fix for annotate_browser__callq()

2013-10-14T15:21:18+00:00

The target address is provided by objdump and is not necessary a memory address. Add a helper to get the correct address. Signed-off-by: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1381747424-3557-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo