BMC/Intel-BMC/linux.git/sound, branch v4.3

Merge tag 'asoc-fix-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2015-10-23T04:56:56+00:00

ASoC: Fixes for v4.3 A bunch of driver fixes plus one core fix which fixes problems with misreporting values from _SX controls following a recent refactoring. This had gone unnoticed as such controls are quite rare.

Merge remote-tracking branches 'asoc/fix/rt298', 'asoc/fix/sx', 'asoc/fix/wm8904' and 'asoc/fix/wm8962' into asoc-linus

2015-10-22T23:44:14+00:00

ASoC: wm8962: mark cache_dirty flag after software reset in pm_resume

2015-10-22T12:30:51+00:00

By doing software reset of wm8962 in pm_resume, all registers which have already been set will be reset to default value without regmap interface be involved, thus driver need to mark cache_dirty flag, to let regcache can be updated by regcache_sync(). Signed-off-by: Jiada Wang Acked-by: Charles Keepax Signed-off-by: Mark Brown

ASoC: rt298: fix wrong setting of gpio2_en

2015-10-21T12:23:43+00:00

The register value to enable gpio2 was incorrect. So fix it. Signed-off-by: Bard Liao Signed-off-by: Mark Brown

ALSA: hda - Fix deadlock at error in building PCM

2015-10-20T14:31:34+00:00

The HDA codec driver issues snd_hda_codec_reset() at the error path of PCM build. This was needed in the earlier code base, but the recent rewrite to use the standard bus binding made this a deadlock: modprobe D 0000000000000005 0 720 716 0x00000080 Call Trace: [] schedule+0x3e/0x90 [] schedule_preempt_disabled+0x15/0x20 [] __mutex_lock_slowpath+0xb5/0x120 [] mutex_lock+0x1b/0x30 [] device_release_driver+0x1b/0x30 [] bus_remove_device+0x105/0x180 [] device_del+0x139/0x260 [] snd_hdac_device_unregister+0x25/0x30 [snd_hda_core] [] snd_hda_codec_reset+0x2a/0x70 [snd_hda_codec] [] snd_hda_codec_build_pcms+0x18b/0x1b0 [snd_hda_codec] [] hda_codec_driver_probe+0xbe/0x140 [snd_hda_codec] [] driver_probe_device+0x1f4/0x460 [] __driver_attach+0x90/0xa0 [] bus_for_each_dev+0x64/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x1eb/0x280 [] driver_register+0x60/0xe0 [] __hda_codec_driver_register+0x5a/0x60 [snd_hda_codec] [] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [] do_one_initcall+0xb3/0x200 [] do_init_module+0x60/0x1f8 [] load_module+0x1653/0x1bd0 [] SYSC_finit_module+0x98/0xc0 [] SyS_finit_module+0xe/0x10 [] entry_SYSCALL_64_fastpath+0x16/0x75 The simple fix is just to remove this call, since we don't need to think about unbinding at there any longer. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=948758 Cc: # v4.1+ Signed-off-by: Takashi Iwai

ASoC: Add info callback for SX_TLV controls

2015-10-16T15:17:25+00:00

SX_TLV controls are intended for situations where the register behind the control has some non-zero value indicating the minimum gain and then gains increasing from there and eventually overflowing through zero. Currently every CODEC implementing these controls specifies the minimum as the non-zero value for the minimum and the maximum as the number of gain settings available. This means when the info callback subtracts the minimum value from the maximum value to calculate the number of gain levels available it is actually under reporting the available levels. This patch fixes this issue by adding a new snd_soc_info_volsw_sx callback that does not subtract the minimum value. Fixes: 1d99f2436d0d ("ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV") Signed-off-by: Charles Keepax Acked-by: Brian Austin Tested-by: Brian Austin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

ASoC: rt298: correct index default value

2015-10-16T14:21:13+00:00

Some of the default value on rt298_index_def are incorrect. Change them to the correct value. Signed-off-by: Bard Liao Signed-off-by: Mark Brown

ALSA: hda - Fix inverted internal mic on Lenovo G50-80

2015-10-13T09:34:33+00:00

Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1504778 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai

ALSA: hdac: Explicitly add io.h

2015-10-13T09:33:45+00:00

Compiling the hdac extended core on arm fails with below error: sound/hda/ext/hdac_ext_bus.c: In function 'hdac_ext_writel': >> sound/hda/ext/hdac_ext_bus.c:29:2: error: implicit declaration of >> function +'writel' [-Werror=implicit-function-declaration] writel(value, addr); ^ sound/hda/ext/hdac_ext_bus.c: In function 'hdac_ext_readl': >> sound/hda/ext/hdac_ext_bus.c:34:2: error: implicit declaration of >> function +'readl' [-Werror=implicit-function-declaration] return readl(addr); This is fixed by explicitly including io.h Fixes: 99463b3a3994 - ('ALSA: hda: provide default bus io ops extended hdac') Reported-by: kbuild test robot Suggested-by: Mark Brown Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai

Merge tag 'asoc-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2015-10-07T18:11:21+00:00

ASoC: Fixes for v4.3 Quite a few fixes here but they're all very small and driver specific, none of them really stand out if you aren't using the relevant hardware but they're all useful if you do happen to have an affected device.