BMC/Intel-BMC/linux.git/sound/firewire, branch dev-4.3

ALSA: bebob: Use a signed return type for get_formation_index

2016-02-19T22:28:30+00:00

commit 07905298e4d5777eb58516cdc242f7ac1ca387a2 upstream. The return type "unsigned int" was used by the get_formation_index function despite of the aspect that it will eventually return a negative error code. So, change to signed int and get index by reference in the parameters. Done with the help of Coccinelle. [Fix the missing braces suggested by Julia Lawall -- tiwai] Signed-off-by: Lucas Tanure Reviewed-by: Takashi Sakamoto Tested-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: fireworks/bebob/oxfw/dice: enable to make as built-in

2016-01-31T19:25:44+00:00

commit df4833886f91eea0d20e6e97066adab308625ef8 upstream. When committed to upstream, these four modules had wrong entries for Makefile. This forces them to be loadable modules even if they're set as built-in. This commit fixes this bug. Fixes: b5b04336015e('ALSA: fireworks: Add skelton for Fireworks based devices') Fixes: fd6f4b0dc167('ALSA: bebob: Add skelton for BeBoB based devices') Fixes: 1a4e39c2e5ca('ALSA: oxfw: Move to its own directory') Fixes: 14ff6a094815('ALSA: dice: Move file to its own directory') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure

2015-08-29T07:14:41+00:00

In PCM core, when hw_params() in each driver returns error, the state of PCM substream is kept as 'open'. In this case, current drivers for sound units on IEEE 1394 bus doesn't decrement substream counter in hw_free() correctly. This causes these drivers to keep streams even if not required. This commit fixes this bug. When snd_pcm_lib_alloc_vmalloc_buffer() fails, hw_params function in each driver returns without incrementing the counter. Reported-by: Takashi Iwai Signed-off-by: Takashi Sakamoto Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai

Merge branch 'for-linus' into for-next

2015-08-11T07:40:16+00:00

ALSA: firewire: use kmemdup rather than duplicating its implementation

2015-08-07T12:52:07+00:00

The patch was generated using fixed coccinelle semantic patch scripts/coccinelle/api/memdup.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2014320 Signed-off-by: Andrzej Hajda Signed-off-by: Takashi Iwai

ALSA: fireworks/firewire-lib: add support for recent firmware quirk

2015-08-05T05:52:39+00:00

Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on from it. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a quirk to transfer a first packet with 0x02 in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. In this case, firmware version 5.7.0, 5.7.3 and 5.8.0 are used. Payload CIP CIP quadlets header1 header2 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff (AudioFire2 with firmware version 5.7.) $ dmesg snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02 These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface Pack series uses the same ARM binary as their firmware. Thus, this quirk may be observed among them. This commit adds a new member for AMDTP structure. This member represents the value of dbc field in a first AMDTP packet. Drivers can set it with a preferred value according to model's quirk. Tested-by: Johannes Oertei Signed-off-by: Takashi Sakamoto Cc: Signed-off-by: Takashi Iwai

Revert "ALSA: fireworks: add support for AudioFire2 quirk"

2015-08-05T05:51:53+00:00

This reverts commit 9c6893e0be38b6ca9a56a854226e51dee0a16a5a. The fix is superseded by the next commit as a better implementation for supporting AudioFire2/AudioFire4/AudioFirePre8 quirks. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: fireworks: add support for AudioFire2 quirk

2015-07-27T08:12:25+00:00

Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. AudioFire2 has a quirk to transfer a first packet with non-zero in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. As long as I investigated, firmware 5.7, 5.7.6 and 5.8 have this quirk. This commit adds a support for the quirk to handle AudioFire2 packets. For safe, CIP_SKIP_INIT_DBC_CHECK is applied to all versions of AudioFire2's firmwares. 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: add support for Behringer FCA 610/1616

2015-06-15T11:38:47+00:00

They're based on DM1500 (ArchWave produced), and BeBoB version 3 is installed. $ cat /proc/asound/FCA610/firewire/firmware Manufacturer: bridgeCo Protocol Ver: 3 Build Ver: 0 GUID: 0x001564000002AD73 Model ID: 0x03 Model Rev: 0 Firmware Date: 20121102 Firmware Time: 153431 Firmware ID: 0x610 Firmware Ver: 8348 Base Addr: 0x400C0080 Max Size: 1422624 Loader Date: 20121015 Loader Time: 104710 Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: bebob: keep duplex streams always to keep internal multiplexer properly

2015-06-15T11:38:29+00:00

Behringer FCA610 transmits packets with periodic noisy PCM samples when receiving no streams, and generates a bit noisy sound. ALSA BeBoB driver is programmed to establish both in/out connections when starting streaming, then transfers packets as userspace applications requested. This means that there's a case that one of incoming/outgoing streams is running, to save CPU and bandwidth usage. Although, it's natural to start transferring packets in both direction. This commit makes this driver to keeps duplex streams always. Tested-by: Kim Tore Jensen Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai