BMC/Intel-BMC/linux.git/sound/firewire, branch dev-4.19

ALSA: bebob: fix model-id of unit for Apogee Ensemble

2019-01-26T08:32:42+00:00

[ Upstream commit 644b2e97405b0b74845e1d3c2b4fe4c34858062b ] This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: oxfw: add support for APOGEE duet FireWire

2019-01-26T08:32:34+00:00

[ Upstream commit fba43f454cdf9caa3185219d116bd2a6e6354552 ] This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: firewire-lib: use the same print format for 'without_header' tracepoints

2019-01-09T16:38:38+00:00

commit 5ef108c53e6efd695e32aad969638ccbc35b4be9 upstream. An initial commit to add tracepoints for packets without CIP headers uses different print formats for added tracepoints. However this is not convenient for users/developers to prepare debug tools. This commit uses the same format for the two tracepoints. Cc: # v4.12+ Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: firewire-lib: fix wrong assignment for 'out_packet_without_header' tracepoint

2019-01-09T16:38:37+00:00

commit aa9a9e39b4f65733bf19d90cbd026e85a74efb99 upstream. An initial commit to add tracepoints for packets without CIP headers introduces a wrong assignment to 'data_blocks' value of 'out_packet_without_header' tracepoint. This commit fixes the bug. Cc: # v4.12+ Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: firewire-lib: fix wrong handling payload_length as payload_quadlet

2019-01-09T16:38:37+00:00

commit ada79fa5a0b374dd2c2262137c734da7524a8263 upstream. In IEC 61883-1/6 engine of ALSA firewire stack, a packet handler has a second argument for 'the number of bytes in payload of isochronous packet'. However, an incoming packet handler without CIP header uses the value as 'the number of quadlets in the payload'. This brings userspace applications to receive the number of PCM frames as four times against real time. This commit fixes the bug. Cc: # v4.12+ Fixes: 3b196c394dd ('ALSA: firewire-lib: add no-header packet processing') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: fireface: fix for state to fetch PCM frames

2019-01-09T16:38:37+00:00

commit 3d16200a3e55a39caa1c88419cb559c00316f721 upstream. According to my memo at hand and saved records, writing 0x00000001 to SND_FF_REG_FETCH_PCM_FRAMES disables fetching PCM frames in corresponding channel, however current implement uses reversed logic. This results in muted volume in device side during playback. This commit corrects the bug. Cc: # v4.12+ Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: fireface: fix reference to wrong register for clock configuration

2018-12-17T08:24:41+00:00

commit fa9c98e4b975bb3192ed6af09d9fa282ed3cd8a0 upstream. In an initial commit, 'SYNC_STATUS' register is referred to get clock configuration, however this is wrong, according to my local note at hand for reverse-engineering about packet dump. It should be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config() is correctly programmed. This commit fixes the bug. Cc: # v4.12+ Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400') Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: fireworks: fix memory leak of response buffer at error path

2018-09-17T11:41:14+00:00

After allocating memory object for response buffer, ALSA fireworks driver has leak of the memory object at error path. This commit releases the object at the error path. Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: oxfw: fix memory leak of discovered stream formats at error path

2018-09-17T11:40:47+00:00

After finishing discover of stream formats, ALSA OXFW driver has memory leak of allocated memory object at error path. This commit releases the memory object at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

ALSA: oxfw: fix memory leak for model-dependent data at error path

2018-09-17T11:40:09+00:00

After allocating model-dependent data, ALSA OXFW driver has memory leak of the data at error path. This commit releases the data at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai