BMC/Intel-BMC/linux.git/net, branch v5.4.33

cfg80211: Do not warn on same channel at the end of CSA

2020-04-17T08:49:59+00:00

[ Upstream commit 05dcb8bb258575a8dd3499d0d78bd2db633c2b23 ] When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

rxrpc: Fix call interruptibility handling

2020-04-17T08:49:57+00:00

[ Upstream commit e138aa7d3271ac1b0690ae2c9b04d51468dce1d6 ] Fix the interruptibility of kernel-initiated client calls so that they're either only interruptible when they're waiting for a call slot to come available or they're not interruptible at all. Either way, they're not interruptible during transmission. This should help prevent StoreData calls from being interrupted when writeback is in progress. It doesn't, however, handle interruption during the receive phase. Userspace-initiated calls are still interruptable. After the signal has been handled, sendmsg() will return the amount of data copied out of the buffer and userspace can perform another sendmsg() call to continue transmission. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by: David Howells Signed-off-by: Sasha Levin

rxrpc: Abstract out the calculation of whether there's Tx space

2020-04-17T08:49:57+00:00

[ Upstream commit 158fe6665389964a1de212818b4a5c52b7f7aff4 ] Abstract out the calculation of there being sufficient Tx buffer space. This is reproduced several times in the rxrpc sendmsg code. Signed-off-by: David Howells Signed-off-by: Sasha Levin

Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl

2020-04-13T08:48:13+00:00

commit 71811cac8532b2387b3414f7cd8fe9e497482864 upstream. Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't increase dlc->refcnt. Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang Suggested-by: Hillf Danton Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

net_sched: fix a missing refcnt in tcindex_init()

2020-04-13T08:48:04+00:00

[ Upstream commit a8eab6d35e22f4f21471f16147be79529cd6aaf7 ] The initial refcnt of struct tcindex_data should be 1, it is clear that I forgot to set it to 1 in tcindex_init(). This leads to a dec-after-zero warning. Reported-by: syzbot+8325e509a1bf83ec741d@syzkaller.appspotmail.com Fixes: 304e024216a8 ("net_sched: add a temporary refcnt for struct tcindex_data") Cc: Jamal Hadi Salim Cc: Jiri Pirko Cc: Paul E. McKenney Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net_sched: add a temporary refcnt for struct tcindex_data

2020-04-13T08:48:04+00:00

[ Upstream commit 304e024216a802a7dc8ba75d36de82fa136bbf3e ] Although we intentionally use an ordered workqueue for all tc filter works, the ordering is not guaranteed by RCU work, given that tcf_queue_work() is esstenially a call_rcu(). This problem is demostrated by Thomas: CPU 0: tcf_queue_work() tcf_queue_work(&r->rwork, tcindex_destroy_rexts_work); -> Migration to CPU 1 CPU 1: tcf_queue_work(&p->rwork, tcindex_destroy_work); so the 2nd work could be queued before the 1st one, which leads to a free-after-free. Enforcing this order in RCU work is hard as it requires to change RCU code too. Fortunately we can workaround this problem in tcindex filter by taking a temporary refcnt, we only refcnt it right before we begin to destroy it. This simplifies the code a lot as a full refcnt requires much more changes in tcindex_set_parms(). Reported-by: syzbot+46f513c3033d592409d2@syzkaller.appspotmail.com Fixes: 3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()") Cc: Thomas Gleixner Cc: Paul E. McKenney Cc: Jamal Hadi Salim Cc: Jiri Pirko Signed-off-by: Cong Wang Reviewed-by: Paul E. McKenney Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: don't auto-add link-local address to lag ports

2020-04-13T08:48:02+00:00

[ Upstream commit 744fdc8233f6aa9582ce08a51ca06e59796a3196 ] Bonding slave and team port devices should not have link-local addresses automatically added to them, as it can interfere with openvswitch being able to properly add tc ingress. Basic reproducer, courtesy of Marcelo: $ ip link add name bond0 type bond $ ip link set dev ens2f0np0 master bond0 $ ip link set dev ens2f1np2 master bond0 $ ip link set dev bond0 up $ ip a s 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens2f0np0: mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff 5: ens2f1np2: mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff 11: bond0: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link valid_lft forever preferred_lft forever (above trimmed to relevant entries, obviously) $ sysctl net.ipv6.conf.ens2f0np0.addr_gen_mode=0 net.ipv6.conf.ens2f0np0.addr_gen_mode = 0 $ sysctl net.ipv6.conf.ens2f1np2.addr_gen_mode=0 net.ipv6.conf.ens2f1np2.addr_gen_mode = 0 $ ip a l ens2f0np0 2: ens2f0np0: mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative valid_lft forever preferred_lft forever $ ip a l ens2f1np2 5: ens2f1np2: mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000 link/ether 00:0f:53:2f:ea:40 brd ff:ff:ff:ff:ff:ff inet6 fe80::20f:53ff:fe2f:ea40/64 scope link tentative valid_lft forever preferred_lft forever Looks like addrconf_sysctl_addr_gen_mode() bypasses the original "is this a slave interface?" check added by commit c2edacf80e15, and results in an address getting added, while w/the proposed patch added, no address gets added. This simply adds the same gating check to another code path, and thus should prevent the same devices from erroneously obtaining an ipv6 link-local address. Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode") Reported-by: Moshe Levi CC: Stephen Hemminger CC: Marcelo Ricardo Leitner CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Fix Tx hash bound checking

2020-04-08T07:08:46+00:00

commit 6e11d1578fba8d09d03a286740ffcf336d53928c upstream. Fixes the lower and upper bounds when there are multiple TCs and traffic is on the the same TC on the same device. The lower bound is represented by 'qoffset' and the upper limit for hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue mapping when there are multiple TCs, as the queue indices for upper TCs will be offset by 'qoffset'. v2: Fixed commit description based on comments. Fixes: 1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash") Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Signed-off-by: Amritha Nambiar Reviewed-by: Alexander Duyck Reviewed-by: Sridhar Samudrala Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: fix TFO SYNACK undo to avoid double-timestamp-undo

2020-04-08T07:08:45+00:00

commit dad8cea7add96a353fa1898b5ccefbb72da66f29 upstream. In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix sendmsg(MSG_WAITALL) handling

2020-04-08T07:08:45+00:00

commit 498b577660f08cef5d9e78e0ed6dcd4c0939e98c upstream. Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the timeout for when a signal occurs up to at least two jiffies as a 1 jiffy timeout may end up being effectively 0 if jiffies wraps at the wrong time. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman