BMC/Intel-BMC/linux.git/net, branch dev

net/ncsi: Netlink support

2015-10-06T03:50:04+00:00

This adds netlink support so that userland can retrieve the NCSI topology on the specified interface. Also, more netlink commands are introduced to retrieve information from the active channel or configure the active channel with provided options. Signed-off-by: Gavin Shan

net/ncsi: Manage NCSI device

2015-10-06T03:50:04+00:00

There are multiple packages and channels connecting to NCSI enabled interface. The available packages and channels are probed with NCSI packets when NCSI device is started. Among the available packages and channels, only one channel should be selected to be active to provide service. When the active channel enters to failure state, we need choose another channel as active one to do failover. This implements the state machine to support above tasks. Also, the public interfaces are exposed for NIC driver to manage NCSI device. Signed-off-by: Gavin Shan

net/ncsi: Packet handler

2015-10-06T03:50:03+00:00

NCSI packet encapsulated in ethernet frame is recognized by the ethernet protocol field (0x88F8). According to NCSI spec, the destination MAC field should be 0xFF's, but the source MAC field could be arbitrary one since channel field in NCSI header indicates the source of the packet. There are 3 types of packets depending on the type field in the NCSI packet header: command, response, Asynchronous Event Notification (AEN). The command packets are sent from NCSI enabled interace to the NCSI package or channel for purpose of information retrival or configuration. The response packets, as responses to the received command packets, originate from NCSI package or channel and terminate at NCSI enabled interface. AEN packets are sent from NCSI channel for asynchronous events that might indicate failure detected on the active channel. This implements the functions to handle NCSI packets. Signed-off-by: Gavin Shan

net/ncsi: Resource management

2015-10-06T03:50:02+00:00

According to NCSI spec (DSP0222), the NCSI enabled interface can connected to multiple packages simultaneously, up to 8 packages. Each package includes multiple channels, up to 32 channels. At one moment, one channel is enabled to provide service to the NCSI enabled interface. Besides, each channel comprises capabilities, modes, filters, version and statistics etc. All of them are resources to NCSI protocol stack. At the meanwhile, the NCSI device seen from NIC driver is represented by "struct ncsi_dev", which is expected to populated and started by NIC driver before the NIC can work. All possible NCSI packages and NCSI channels connected to the NCSI interface are tracked from the NCSI device. Also, the NCSI device recognizes active channel that is currently providing service to NCSI enabled interface. Also, the NCSI requests (pairs of command and response) are embedded in NCSI device. This introduces the data structs to represents the NCSI resources mentioned as above. Also, functions used by NCSI stack internally are implemented. Besides, this introduces kernel config option CONFIG_NET_NCSI to enable NCSI stack. Signed-off-by: Gavin Shan

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-28T00:52:38+00:00

Pull networking fixes from David Miller: "Some straggler bug fixes here: 1) Netlink_sendmsg() doesn't check iterator type properly in mmap case, from Ken-ichirou MATSUZAWA. 2) Don't sleep in atomic context in bcmgenet driver, from Florian Fainelli. 3) The pfkey_broadcast() code patch can't actually ever use anything other than GFP_ATOMIC. And the cases that right now pass GFP_KERNEL or similar will currently trigger an RCU splat. Just use GFP_ATOMIC unconditionally. From David Ahern. 4) Fix FD bit timings handling in pcan_usb driver, from Marc Kleine-Budde. 5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang. 6) Traversal into drivers/net/ethernet/renesas should be triggered by CONFIG_NET_VENDOR_RENESAS, not a particular driver's config option. From Kazuya Mizuguchi. 7) Fix regression in handling of igmp_join errors in vxlan, from Marcelo Ricardo Leitner. 8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock mutex when programming the registers. From Russell King. 9) Fix non-forced handling in u32_destroy(), from WANG Cong. 10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in usbnet_stop(), from Eugene Shatokhin. 11) In sfc driver, don't fetch statistics firmware isn't capable of, from Bert Kenward. 12) Verify ASCONF address parameter location in SCTP, from Xin Long" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state sctp: asconf's process should verify address parameter is in the beginning sfc: only use vadaptor stats if firmware is capable net: phy: fixed: propagate fixed link values to struct usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared drivers: net: xgene: fix: Oops in linkwatch_fire_event cls_u32: complete the check for non-forced case in u32_destroy() net: fec: use reinit_completion() in mdio accessor functions net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect() vxlan: re-ignore EADDRINUSE from igmp_join net: compile renesas directory if NET_VENDOR_RENESAS is configured ip6_gre: release cached dst on tunnel removal phylib: Make PHYs children of their MDIO bus, not the bus' parent. can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters net: Fix RCU splat in af_key net: bcmgenet: fix uncleaned dma flags net: bcmgenet: Avoid sleeping in bcmgenet_timeout netlink: mmap: fix tx type check

sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state

2015-08-28T00:11:44+00:00

Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not resetting the association overall_error_count. This allowed the association to better enforce assoc.max_retrans limit. However, the same issue still exists when the association is in SHUTDOWN_RECEIVED state. In this state, HB-ACKs will continue to reset the overall_error_count for the association would extend the lifetime of association unnecessarily. This patch solves this by resetting the overall_error_count whenever the current state is small then SCTP_STATE_SHUTDOWN_PENDING. As a small side-effect, we end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT states, but they are not really impacted because we disable Heartbeats in those states. Fixes: Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Vlad Yasevich Signed-off-by: David S. Miller

sctp: asconf's process should verify address parameter is in the beginning

2015-08-27T20:59:33+00:00

in sctp_process_asconf(), we get address parameter from the beginning of the addip params. but we never check if it's really there. if the addr param is not there, it still can pass sctp_verify_asconf(), then to be handled by sctp_process_asconf(), it will not be safe. so add a code in sctp_verify_asconf() to check the address parameter is in the beginning, or return false to send abort. note that this can also detect multiple address parameters, and reject it. Signed-off-by: Xin Long Signed-off-by: Marcelo Ricardo Leitner Acked-by: Vlad Yasevich Signed-off-by: David S. Miller

cls_u32: complete the check for non-forced case in u32_destroy()

2015-08-26T00:02:48+00:00

In commit 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Reported-by: Akshat Kakkar Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Signed-off-by: Cong Wang Signed-off-by: David S. Miller

ip6_gre: release cached dst on tunnel removal

2015-08-25T21:33:00+00:00

When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: huaibin Wang Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller

net: Fix RCU splat in af_key

2015-08-24T21:48:10+00:00

Hit the following splat testing VRF change for ipsec: [ 113.475692] =============================== [ 113.476194] [ INFO: suspicious RCU usage. ] [ 113.476667] 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED Not tainted [ 113.477545] ------------------------------- [ 113.478013] /work/monster-14/dsa/kernel.git/include/linux/rcupdate.h:568 Illegal context switch in RCU read-side critical section! [ 113.479288] [ 113.479288] other info that might help us debug this: [ 113.479288] [ 113.480207] [ 113.480207] rcu_scheduler_active = 1, debug_locks = 1 [ 113.480931] 2 locks held by setkey/6829: [ 113.481371] #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [] pfkey_sendmsg+0xfb/0x213 [ 113.482509] #1: (rcu_read_lock){......}, at: [] rcu_read_lock+0x0/0x6e [ 113.483509] [ 113.483509] stack backtrace: [ 113.484041] CPU: 0 PID: 6829 Comm: setkey Not tainted 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED [ 113.485422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 113.486845] 0000000000000001 ffff88001d4c7a98 ffffffff81518af2 ffffffff81086962 [ 113.487732] ffff88001d538480 ffff88001d4c7ac8 ffffffff8107ae75 ffffffff8180a154 [ 113.488628] 0000000000000b30 0000000000000000 00000000000000d0 ffff88001d4c7ad8 [ 113.489525] Call Trace: [ 113.489813] [] dump_stack+0x4c/0x65 [ 113.490389] [] ? console_unlock+0x3d6/0x405 [ 113.491039] [] lockdep_rcu_suspicious+0xfa/0x103 [ 113.491735] [] rcu_preempt_sleep_check+0x45/0x47 [ 113.492442] [] ___might_sleep+0x19/0x1c8 [ 113.493077] [] __might_sleep+0x6c/0x82 [ 113.493681] [] cache_alloc_debugcheck_before.isra.50+0x1d/0x24 [ 113.494508] [] kmem_cache_alloc+0x31/0x18f [ 113.495149] [] skb_clone+0x64/0x80 [ 113.495712] [] pfkey_broadcast_one+0x3d/0xff [ 113.496380] [] pfkey_broadcast+0xb5/0x11e [ 113.497024] [] pfkey_register+0x191/0x1b1 [ 113.497653] [] pfkey_process+0x162/0x17e [ 113.498274] [] pfkey_sendmsg+0x109/0x213 In pfkey_sendmsg the net mutex is taken and then pfkey_broadcast takes the RCU lock. Since pfkey_broadcast takes the RCU lock the allocation argument is pointless since GFP_ATOMIC must be used between the rcu_read_{,un}lock. The one call outside of rcu can be done with GFP_KERNEL. Fixes: 7f6b9dbd5afbd ("af_key: locking change") Signed-off-by: David Ahern Acked-by: Eric Dumazet Signed-off-by: David S. Miller