BMC/Intel-BMC/linux.git/net/tipc/bcast.c, branch dev-5.2

tipc: add NULL pointer check

2019-04-05T00:34:11+00:00

skb somehow dequeued out of inputq before processing, it causes to NULL pointer and kernel crashed. Add checking skb valid before using. Fixes: c55c8edafa9 ("tipc: smooth change between replicast and broadcast") Reported-by: Tuong Lien Tong Acked-by: Ying Xue Signed-off-by: Hoang Le Acked-by: Jon Maloy Signed-off-by: David S. Miller

tipc: fix return value check in tipc_mcast_send_sync()

2019-03-26T18:39:37+00:00

Fix the return value check which testing the wrong variable in tipc_mcast_send_sync(). Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Acked-by: Jon Maloy Signed-off-by: David S. Miller

tipc: fix a null pointer deref

2019-03-21T16:56:55+00:00

In commit c55c8edafa91 ("tipc: smooth change between replicast and broadcast") we introduced new method to eliminate the risk of message reordering that happen in between different nodes. Unfortunately, we forgot checking at receiving side to ignore intra node. We fix this by checking and returning if arrived message from intra node. syzbot report: ================================================================== kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782 Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc 24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00 RSP: 0018:ffff8880959defc8 EFLAGS: 00010202 RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8 RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8 R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000 R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48 FS: 000000000106a880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209 tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410 tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820 __tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358 tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 ___sys_sendmsg+0x806/0x930 net/socket.c:2260 __sys_sendmsg+0x105/0x1d0 net/socket.c:2298 __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg net/socket.c:2305 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401c9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50 R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace ba79875754e1708f ]--- Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy Signed-off-by: Hoang Le Signed-off-by: David S. Miller

tipc: smooth change between replicast and broadcast

2019-03-19T20:56:17+00:00

Currently, a multicast stream may start out using replicast, because there are few destinations, and then it should ideally switch to L2/broadcast IGMP/multicast when the number of destinations grows beyond a certain limit. The opposite should happen when the number decreases below the limit. To eliminate the risk of message reordering caused by method change, a sending socket must stick to a previously selected method until it enters an idle period of 5 seconds. Means there is a 5 seconds pause in the traffic from the sender socket. If the sender never makes such a pause, the method will never change, and transmission may become very inefficient as the cluster grows. With this commit, we allow such a switch between replicast and broadcast without any need for a traffic pause. Solution is to send a dummy message with only the header, also with the SYN bit set, via broadcast or replicast. For the data message, the SYN bit is set and sending via replicast or broadcast (inverse method with dummy). Then, at receiving side any messages follow first SYN bit message (data or dummy message), they will be held in deferred queue until another pair (dummy or data message) arrived in other link. v2: reverse christmas tree declaration Acked-by: Jon Maloy Signed-off-by: Hoang Le Signed-off-by: David S. Miller

tipc: support broadcast/replicast configurable for bc-link

2019-03-19T20:56:17+00:00

Currently, a multicast stream uses either broadcast or replicast as transmission method, based on the ratio between number of actual destinations nodes and cluster size. However, when an L2 interface (e.g., VXLAN) provides pseudo broadcast support, this becomes very inefficient, as it blindly replicates multicast packets to all cluster/subnet nodes, irrespective of whether they host actual target sockets or not. The TIPC multicast algorithm is able to distinguish real destination nodes from other nodes, and hence provides a smarter and more efficient method for transferring multicast messages than pseudo broadcast can do. Because of this, we now make it possible for users to force the broadcast link to permanently switch to using replicast, irrespective of which capabilities the bearer provides, or pretend to provide. Conversely, we also make it possible to force the broadcast link to always use true broadcast. While maybe less useful in deployed systems, this may at least be useful for testing the broadcast algorithm in small clusters. We retain the current AUTOSELECT ability, i.e., to let the broadcast link automatically select which algorithm to use, and to switch back and forth between broadcast and replicast as the ratio between destination node number and cluster size changes. This remains the default method. Furthermore, we make it possible to configure the threshold ratio for such switches. The default ratio is now set to 10%, down from 25% in the earlier implementation. Acked-by: Jon Maloy Signed-off-by: Hoang Le Signed-off-by: David S. Miller

tipc: correct spelling errors for struct tipc_bc_base's comment

2018-09-04T05:03:07+00:00

Trivial fix for two spelling mistakes. Signed-off-by: Zhenbo Gao Reviewed-by: Ying Xue Signed-off-by: David S. Miller

net: tipc: bcast: Replace GFP_ATOMIC with GFP_KERNEL in tipc_bcast_init()

2018-07-27T20:45:15+00:00

tipc_bcast_init() is never called in atomic context. It calls kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller

tipc: bcast: use true and false for boolean values

2018-03-07T17:18:00+00:00

Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Acked-by: Ying Xue Signed-off-by: David S. Miller

tipc: fall back to smaller MTU if allocation of local send skb fails

2017-12-01T20:21:25+00:00

When sending node local messages the code is using an 'mtu' of 66060 bytes to avoid unnecessary fragmentation. During situations of low memory tipc_msg_build() may sometimes fail to allocate such large buffers, resulting in unnecessary send failures. This can easily be remedied by falling back to a smaller MTU, and then reassemble the buffer chain as if the message were arriving from a remote node. At the same time, we change the initial MTU setting of the broadcast link to a lower value, so that large messages always are fragmented into smaller buffers even when we run in single node mode. Apart from obtaining the same advantage as for the 'fallback' solution above, this turns out to give a significant performance improvement. This can probably be explained with the __pskb_copy() operation performed on the buffer for each recipient during reception. We found the optimal value for this, considering the most relevant skb pool, to be 3744 bytes. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller

tipc: improve destination linked list

2017-10-13T15:46:00+00:00

We often see a need for a linked list of destination identities, sometimes containing a port number, sometimes a node identity, and sometimes both. The currently defined struct u32_list is not generic enough to cover all cases, so we extend it to contain two u32 integers and rename it to struct tipc_dest_list. Signed-off-by: Jon Maloy Acked-by: Ying Xue Signed-off-by: David S. Miller