BMC/Intel-BMC/linux.git/net/openvswitch, branch dev-5.15-intel

netfilter: conntrack: convert to refcount_t api

2022-04-27T12:39:01+00:00

commit 719774377622bc4025d2a74f551b5dc2158c6c30 upstream. Convert nf_conn reference counting from atomic_t to refcount_t based api. refcount_t api provides more runtime sanity checks and will warn on certain constructs, e.g. refcount_inc() on a zero reference count, which usually indicates use-after-free. For this reason template allocation is changed to init the refcount to 1, the subsequenct add operations are removed. Likewise, init_conntrack() is changed to set the initial refcount to 1 instead refcount_inc(). This is safe because the new entry is not (yet) visible to other cpus. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

openvswitch: fix OOB access in reserve_sfa_size()

2022-04-27T12:39:00+00:00

commit cefa91b2332d7009bc0be5d951d6cbbf349f90f8 upstream. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied. Fix it by rearranging the flow action size check. KASAN splat below: ================================================================== BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch] Write of size 65360 at addr ffff888147e4001c by task handler15/836 CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27 ... Call Trace: dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_report+0xb5/0x130 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 reserve_sfa_size+0x1ba/0x380 [openvswitch] __add_action+0x24/0x120 [openvswitch] ovs_nla_add_action+0xe/0x20 [openvswitch] ovs_ct_copy_action+0x29d/0x1130 [openvswitch] ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x56/0xa0 ? create_prof_cpu_mask+0x20/0x20 ? ovs_ct_verify+0xf0/0xf0 [openvswitch] ? prep_compound_page+0x198/0x2a0 ? __kasan_check_byte+0x10/0x40 ? kasan_unpoison+0x40/0x70 ? ksize+0x44/0x60 ? reserve_sfa_size+0x75/0x380 [openvswitch] __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch] ? __zone_watermark_ok+0x420/0x420 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch] ? __alloc_pages+0x1a9/0x3e0 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0 ? unwind_next_frame+0x991/0x1e40 ? __mod_node_page_state+0x99/0x120 ? __mod_lruvec_page_state+0x2e3/0x470 ? __kasan_kmalloc_large+0x90/0xe0 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch] ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch] ... Cc: stable@vger.kernel.org Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation") Signed-off-by: Paolo Valerio Acked-by: Eelco Chaudron Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: openvswitch: fix leak of nested actions

2022-04-13T18:59:19+00:00

[ Upstream commit 1f30fb9166d4f15a1aa19449b9da871fe0ed4796 ] While parsing user-provided actions, openvswitch module may dynamically allocate memory and store pointers in the internal copy of the actions. So this memory has to be freed while destroying the actions. Currently there are only two such actions: ct() and set(). However, there are many actions that can hold nested lists of actions and ovs_nla_free_flow_actions() just jumps over them leaking the memory. For example, removal of the flow with the following actions will lead to a leak of the memory allocated by nf_ct_tmpl_alloc(): actions:clone(ct(commit),0) Non-freed set() action may also leak the 'dst' structure for the tunnel info including device references. Under certain conditions with a high rate of flow rotation that may cause significant memory leak problem (2MB per second in reporter's case). The problem is also hard to mitigate, because the user doesn't have direct control over the datapath flows generated by OVS. Fix that by iterating over all the nested actions and freeing everything that needs to be freed recursively. New build time assertion should protect us from this problem if new actions will be added in the future. Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all attributes has to be explicitly checked. sample() and clone() actions are mixing extra attributes into the user-provided action list. That prevents some code generalization too. Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst") Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html Reported-by: Stéphane Graber Signed-off-by: Ilya Maximets Acked-by: Aaron Conole Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: openvswitch: don't send internal clone attribute to the userspace.

2022-04-13T18:59:18+00:00

[ Upstream commit 3f2a3050b4a3e7f32fc0ea3c9b0183090ae00522 ] 'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for performance optimization inside the kernel. It's added by the kernel while parsing user-provided actions and should not be sent during the flow dump as it's not part of the uAPI. The issue doesn't cause any significant problems to the ovs-vswitchd process, because reported actions are not really used in the application lifecycle and only supposed to be shown to a human via ovs-dpctl flow dump. However, the action list is still incorrect and causes the following error if the user wants to look at the datapath flows: # ovs-dpctl add-dp system@ovs-system # ovs-dpctl add-flow "" "clone(ct(commit),0)" # ovs-dpctl dump-flows , packets:0, bytes:0, used:never, actions:clone(bad length 4, expected -1 for: action0(01 00 00 00), ct(commit),0) With the fix: # ovs-dpctl dump-flows , packets:0, bytes:0, used:never, actions:clone(ct(commit),0) Additionally fixed an incorrect attribute name in the comment. Fixes: b233504033db ("openvswitch: kernel datapath clone action") Signed-off-by: Ilya Maximets Acked-by: Aaron Conole Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

openvswitch: Fixed nd target mask field in the flow dump.

2022-04-08T12:24:16+00:00

commit f19c44452b58a84d95e209b847f5495d91c9983a upstream. IPv6 nd target mask was not getting populated in flow dump. In the function __ovs_nla_put_key the icmp code mask field was checked instead of icmp code key field to classify the flow as neighbour discovery. ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0), skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0), ct_zone(0/0),ct_mark(0/0),ct_label(0/0), eth(src=00:00:00:00:00:00/00:00:00:00:00:00, dst=00:00:00:00:00:00/00:00:00:00:00:00), eth_type(0x86dd), ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no), icmpv6(type=135,code=0), nd(target=2001::2/::, sll=00:00:00:00:00:00/00:00:00:00:00:00, tll=00:00:00:00:00:00/00:00:00:00:00:00), packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2 Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c) Signed-off-by: Martin Varghese Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: prefer nf_ct_put instead of nf_conntrack_put

2022-04-08T12:23:53+00:00

[ Upstream commit 408bdcfce8dfd6902f75fbcd3b99d8b24b506597 ] Its the same as nf_conntrack_put(), but without the need for an indirect call. The downside is a module dependency on nf_conntrack, but all of these already depend on conntrack anyway. Cc: Paul Blakey Cc: dev@openvswitch.org Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

openvswitch: always update flow key after nat

2022-04-08T12:23:42+00:00

[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ] During NAT, a tuple collision may occur. When this happens, openvswitch will make a second pass through NAT which will perform additional packet modification. This will update the skb data, but not the flow key that OVS uses. This means that future flow lookups, and packet matches will have incorrect data. This has been supported since 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack"). That commit failed to properly update the sw_flow_key attributes, since it only called the ovs_ct_nat_update_key once, rather than each time ovs_ct_nat_execute was called. As these two operations are linked, the ovs_ct_nat_execute() function should always make sure that the sw_flow_key is updated after a successful call through NAT infrastructure. Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack") Cc: Dumitru Ceara Cc: Numan Siddique Signed-off-by: Aaron Conole Acked-by: Eelco Chaudron Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

openvswitch: Fix setting ipv6 fields causing hw csum failure

2022-03-02T10:47:57+00:00

commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream. Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: openvswitch: Fix ct_state nat flags for conns arriving from tc

2022-01-27T10:04:02+00:00

[ Upstream commit 6f022c2ddbcefaee79502ce5386dfe351d457070 ] Netfilter conntrack maintains NAT flags per connection indicating whether NAT was configured for the connection. Openvswitch maintains NAT flags on the per packet flow key ct_state field, indicating whether NAT was actually executed on the packet. When a packet misses from tc to ovs the conntrack NAT flags are set. However, NAT was not necessarily executed on the packet because the connection's state might still be in NEW state. As such, openvswitch wrongly assumes that NAT was executed and sets an incorrect flow key NAT flags. Fix this, by flagging to openvswitch which NAT was actually done in act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so the packet flow key NAT flags will be correctly set. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey Acked-by: Jamal Hadi Salim Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: openvswitch: Fix matching zone id for invalid conns arriving from tc

2022-01-27T10:04:02+00:00

[ Upstream commit 635d448a1cce4b4ebee52b351052c70434fa90ea ] Zone id is not restored if we passed ct and ct rejected the connection, as there is no ct info on the skb. Save the zone from tc skb cb to tc skb extension and pass it on to ovs, use that info to restore the zone id for invalid connections. Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Paul Blakey Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin