BMC/Intel-BMC/linux.git/net/mac80211/Kconfig, branch dev-5.2

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mac80211: rewrite Kconfig text for mesh

2018-12-05T14:32:28+00:00

Lubomir Rintel recently pointed out a dead link for o11s.org, and repointed it to a still live, but also stale website. As far as I know, no one is updating the content at open80211s.org. Since this Kconfig text was originally written, though, the 802.11s mesh drafts were approved and ultimately rolled into 802.11 proper. Meanwhile, the implementation has converged on the final standard, so we can lose all of the text here and provide something that's a little more helpful and accurate. Signed-off-by: Bob Copeland Reviewed-by: Lubomir Rintel Reviewed-by: Steve deRosier Signed-off-by: Johannes Berg

mac80211: minstrel: merge with minstrel_ht, always enable VHT support

2018-10-11T14:01:01+00:00

Legacy-only devices are not very common and the overhead of the extra code for HT and VHT rates is not big enough to justify all those extra lines of code to make it optional. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg

mac80211: fils_aead: Use crypto api CMAC shash rather than bare cipher

2017-02-08T08:19:17+00:00

Switch the FILS AEAD code to use a cmac(aes) shash instantiated by the crypto API rather than reusing the open coded implementation in aes_cmac_vector(). This makes the code more understandable, and allows platforms to implement cmac(aes) in a more secure (*) and efficient way than is typically possible when using the AES cipher directly. So replace the crypto_cipher by a crypto_shash, and update the aes_s2v() routine to call the shash interface directly. * In particular, the generic table based AES implementation is sensitive to known-plaintext timing attacks on the key, to which AES based MAC algorithms are especially vulnerable, given that their plaintext is not usually secret. Time invariant alternatives are available (e.g., based on SIMD algorithms), but may incur a setup cost that is prohibitive when operating on a single block at a time, which is why they don't usually expose the cipher API. Signed-off-by: Ard Biesheuvel Signed-off-by: Johannes Berg

mac80211: use DECLARE_EWMA

2015-08-14T15:49:53+00:00

Instead of using the out-of-line average calculation, use the new DECLARE_EWMA() macro to declare a signal EWMA, and use that. This actually *reduces* the code size slightly (on x86-64) while also reducing the station info size by 80 bytes. Signed-off-by: Johannes Berg

mac80211: move dot11 counters under MAC80211_DEBUG_COUNTERS

2015-05-05T12:21:54+00:00

Since these counters can only be read through debugfs, there's very little point in maintaining them all the time. However, even just making them depend on debugfs is pointless - they're not normally used. Additionally a number of them aren't even concurrency safe. Move them under MAC80211_DEBUG_COUNTERS so they're normally not even compiled in. Signed-off-by: Johannes Berg

mac80211: make station hash table max_size configurable

2015-04-23T15:26:06+00:00

Allow debug builds to configure the station hash table maximum size in order to run with hash collisions in limited scenarios such as hwsim testing. The default remains 0 which effectively means no limit. Signed-off-by: Johannes Berg

mac80111: Add GCMP and GCMP-256 ciphers

2015-01-27T10:06:09+00:00

This allows mac80211 to configure GCMP and GCMP-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen [remove a spurious newline] Signed-off-by: Johannes Berg

mac80211: 802.11p OCB mode support

2014-11-04T12:18:21+00:00

This patch adds 802.11p OCB (Outside the Context of a BSS) mode support. When communicating in OCB mode a mandatory wildcard BSSID (48 '1' bits) is used. The EDCA parameters handling function was changed to support 802.11p specific values. The insertion of a newly discovered STAs is done in the similar way as in the IBSS mode -- through the deferred insertion. The OCB mode uses a periodic 'housekeeping task' for expiration of disconnected STAs (in the similar manner as in the MESH mode). New Kconfig option for verbose OCB debugging outputs is added. Signed-off-by: Rostislav Lisovy Signed-off-by: Johannes Berg

mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHz

2014-10-21T11:25:26+00:00

When the new CONFIG_MAC80211_RC_MINSTREL_VHT is not set (default 'N'), there is no behavioral change including in sampling and MCS_GROUP_RATES remains 8. Otherwise MCS_GROUP_RATES is 10, and a module parameter *vht_only* (default 'true'), restricts the rates selection to VHT when VHT is supported. Regarding the debugfs stats buffer: It is explicitly increased from 8k to 32k to fit every rates incl. when both HT and VHT rates are enabled, as for the format, before: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) after: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) VHT40/LGI MCS5/2 0.0 0.0 0.0 0 0( 0) 0( 0) Signed-off-by: Karl Beldan Cc: Felix Fietkau Signed-off-by: Johannes Berg