BMC/Intel-BMC/linux.git/net/ethtool/netlink.h, branch dev-5.8

net: ethtool: Add generic parts of cable test TDR

2020-05-27T06:21:48+00:00

Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller

net: ethtool: Make helpers public

2020-05-10T19:28:41+00:00

Make some helpers for building ethtool netlink messages available outside the compilation unit, so they can be used for building messages which are not simple get/set. Signed-off-by: Andrew Lunn Reviewed-by: Michal Kubecek Signed-off-by: Jakub Kicinski

net: ethtool: netlink: Add support for triggering a cable test

2020-05-10T19:28:41+00:00

Add new ethtool netlink calls to trigger the starting of a PHY cable test. Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when ETHTOOL_NETLINK is builtin, which would result in kernel linking errors. v2: Remove unwanted white space change Remove ethnl_cable_test_act_ops and use doit handler Rename cable_test_set_policy cable_test_act_policy Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY v3: Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation Remove unused cable_test_get_policy Add Reviewed-by tags v4: Remove unwanted blank line Signed-off-by: Andrew Lunn Reviewed-by: Michal Kubecek Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

ethtool: provide timestamping information with TSINFO_GET request

2020-03-30T05:32:37+00:00

Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek Acked-by: Richard Cochran Signed-off-by: David S. Miller

ethtool: set EEE settings with EEE_SET request

2020-03-30T05:32:36+00:00

Implement EEE_SET netlink request to set EEE settings of a network device. These are traditionally set with ETHTOOL_SEEE ioctl request. The netlink interface allows setting the EEE status for all link modes supported by kernel but only first 32 link modes can be set at the moment as only those are supported by the ethtool_ops callback. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller

ethtool: provide EEE settings with EEE_GET request

2020-03-30T05:32:36+00:00

Implement EEE_GET request to get EEE settings of a network device. These are traditionally available via ETHTOOL_GEEE ioctl request. The netlink interface allows reporting EEE status for all link modes supported by kernel but only first 32 link modes are provided at the moment as only those are reported by the ethtool_ops callback and drivers. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller

ethtool: set pause parameters with PAUSE_SET request

2020-03-30T05:32:36+00:00

Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller

ethtool: provide pause parameters with PAUSE_GET request

2020-03-30T05:32:36+00:00

Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller

ethtool: set coalescing parameters with COALESCE_SET request

2020-03-30T05:32:36+00:00

Implement COALESCE_SET netlink request to set coalescing parameters of a network device. These are traditionally set with ETHTOOL_SCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Like the ioctl implementation, the generic ethtool code checks if only supported parameters are modified; if not, first offending attribute is reported using extack. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller

ethtool: provide coalescing parameters with COALESCE_GET request

2020-03-30T05:32:36+00:00

Implement COALESCE_GET request to get coalescing parameters of a network device. These are traditionally available via ETHTOOL_GCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Omit attributes with zero values unless they are declared as supported (i.e. the corresponding bit in ethtool_ops::supported_coalesce_params is set). Signed-off-by: Michal Kubecek Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller