BMC/Intel-BMC/linux.git/net/core, branch dev-5.15-intel

Merge tag 'v5.15.35' into dev-5.15

2022-04-27T08:56:35+00:00

This is the 5.15.35 stable release Signed-off-by: Joel Stanley

net/sched: flower: fix parsing of ethertype following VLAN header

2022-04-20T07:34:09+00:00

[ Upstream commit 2105f700b53c24aa48b65c15652acc386044d26a ] A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to match the L2 ethertype following the first VLAN header, as confirmed by linked discussion with the maintainer. However, such rule also matches packets that have additional second VLAN header, even though filter has both eth_type and vlan_ethtype set to "ipv4". Looking at the code this seems to be mostly an artifact of the way flower uses flow dissector. First, even though looking at the uAPI eth_type and vlan_ethtype appear like a distinct fields, in flower they are all mapped to the same key->basic.n_proto. Second, flow dissector skips following VLAN header as no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the value of n_proto to last parsed header. With these, such filters ignore any headers present between first VLAN header and first "non magic" header (ipv4 in this case) that doesn't result FLOW_DISSECT_RET_PROTO_AGAIN. Fix the issue by extending flow dissector VLAN key structure with new 'vlan_eth_type' field that matches first ethertype following previously parsed VLAN header. Modify flower classifier to set the new flow_dissector_key_vlan->vlan_eth_type with value obtained from TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs. Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/ Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support") Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers") Signed-off-by: Vlad Buslov Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Merge tag 'v5.15.34' into dev-5.15

2022-04-14T08:19:30+00:00

This is the 5.15.34 stable release Signed-off-by: Joel Stanley

bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide

2022-04-13T18:59:25+00:00

commit 9a69e2b385f443f244a7e8b8bcafe5ccfb0866b4 upstream. remote_port is another case of a BPF context field documented as a 32-bit value in network byte order for which the BPF context access converter generates a load of a zero-padded 16-bit integer in network byte order. First such case was dst_port in bpf_sock which got addressed in commit 4421a582718a ("bpf: Make dst_port field in struct bpf_sock 16-bit wide"). Loading 4-bytes from the remote_port offset and converting the value with bpf_ntohl() leads to surprising results, as the expected value is shifted by 16 bits. Reduce the confusion by splitting the field in two - a 16-bit field holding a big-endian integer, and a 16-bit zero-padding anonymous field that follows it. Suggested-by: Alexei Starovoitov Signed-off-by: Jakub Sitnicki Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com Signed-off-by: Greg Kroah-Hartman

bpf: Support dual-stack sockets in bpf_tcp_check_syncookie

2022-04-13T18:59:19+00:00

[ Upstream commit 2e8702cc0cfa1080f29fd64003c00a3e24ac38de ] bpf_tcp_gen_syncookie looks at the IP version in the IP header and validates the address family of the socket. It supports IPv4 packets in AF_INET6 dual-stack sockets. On the other hand, bpf_tcp_check_syncookie looks only at the address family of the socket, ignoring the real IP version in headers, and validates only the packet size. This implementation has some drawbacks: 1. Packets are not validated properly, allowing a BPF program to trick bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4 socket. 2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end up receiving a SYNACK with the cookie, but the following ACK gets dropped. This patch fixes these issues by changing the checks in bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP version from the header is taken into account, and it is validated properly with address family. Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Alexei Starovoitov Reviewed-by: Tariq Toukan Acked-by: Arthur Fabre Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com Signed-off-by: Sasha Levin

skbuff: fix coalescing for page_pool fragment recycling

2022-04-13T18:59:16+00:00

[ Upstream commit 1effe8ca4e34c34cdd9318436a4232dcb582ebf4 ] Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce(). Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool") Suggested-by: Alexander Duyck Signed-off-by: Jean-Philippe Brucker Reviewed-by: Yunsheng Lin Reviewed-by: Alexander Duyck Acked-by: Ilias Apalodimas Acked-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: limit altnames to 64k total

2022-04-13T18:59:09+00:00

[ Upstream commit 155fb43b70b5fce341347a77d1af2765d1e8fbb8 ] Property list (altname is a link "property") is wrapped in a nlattr. nlattrs length is 16bit so practically speaking the list of properties can't be longer than that, otherwise user space would have to interpret broken netlink messages. Prevent the problem from occurring by checking the length of the property list before adding new entries. Reported-by: George Shuklin Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: account alternate interface name memory

2022-04-13T18:59:09+00:00

[ Upstream commit 5d26cff5bdbebdf98ba48217c078ff102536f134 ] George reports that altnames can eat up kernel memory. We should charge that memory appropriately. Reported-by: George Shuklin Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: initialize init_net earlier

2022-04-13T18:59:03+00:00

[ Upstream commit 9c1be1935fb68b2413796cdc03d019b8cf35ab51 ] While testing a patch that will follow later ("net: add netns refcount tracker to struct nsproxy") I found that devtmpfs_init() was called before init_net was initialized. This is a bug, because devtmpfs_setup() calls ksys_unshare(CLONE_NEWNS); This has the effect of increasing init_net refcount, which will be later overwritten to 1, as part of setup_net(&init_net) We had too many prior patches [1] trying to work around the root cause. Really, make sure init_net is in BSS section, and that net_ns_init() is called earlier at boot time. Note that another patch ("vfs: add netns refcount tracker to struct fs_context") also will need net_ns_init() being called before vfs_caches_init() As a bonus, this patch saves around 4KB in .data section. [1] f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace") b5082df8019a ("net: Initialise init_net.count to 1") 734b65417b24 ("net: Statically initialize init_net.dev_base_head") v2: fixed a build error reported by kernel build bots (CONFIG_NET=n) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bpf: Make dst_port field in struct bpf_sock 16-bit wide

2022-04-13T18:59:02+00:00

[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ] Menglong Dong reports that the documentation for the dst_port field in struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the field is a zero-padded 16-bit integer in network byte order. The value appears to the BPF user as if laid out in memory as so: offsetof(struct bpf_sock, dst_port) + 0 + 8 +16 0x00 +24 0x00 32-, 16-, and 8-bit wide loads from the field are all allowed, but only if the offset into the field is 0. 32-bit wide loads from dst_port are especially confusing. The loaded value, after converting to host byte order with bpf_ntohl(dst_port), contains the port number in the upper 16-bits. Remove the confusion by splitting the field into two 16-bit fields. For backward compatibility, allow 32-bit wide loads from offsetof(struct bpf_sock, dst_port). While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port. Reported-by: Menglong Dong Signed-off-by: Jakub Sitnicki Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin