BMC/Intel-BMC/linux.git/net/core/dev.c, branch v5.4.16

net: Fix packet reordering caused by GRO and listified RX cooperation

2020-01-29T15:45:22+00:00

[ Upstream commit c80794323e82ac6ab45052ebba5757ce47b4b588 ] Commit 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") introduces batching of GRO_NORMAL packets in napi_frags_finish, and commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") adds the same to napi_skb_finish. However, dev_gro_receive (that is called just before napi_{frags,skb}_finish) can also pass skbs to the networking stack: e.g., when the GRO session is flushed, napi_gro_complete is called, which passes pp directly to netif_receive_skb_internal, skipping napi->rx_list. It means that the packet stored in pp will be handled by the stack earlier than the packets that arrived before, but are still waiting in napi->rx_list. It leads to TCP reorderings that can be observed in the TCPOFOQueue counter in netstat. This commit fixes the reordering issue by making napi_gro_complete also use napi->rx_list, so that all packets going through GRO will keep their order. In order to keep napi_gro_flush working properly, gro_normal_list calls are moved after the flush to clear napi->rx_list. iwlwifi calls napi_gro_flush directly and does the same thing that is done by gro_normal_list, so the same change is applied there: napi_gro_flush is moved to be before the flush of napi->rx_list. A few other drivers also use napi_gro_flush (brocade/bna/bnad.c, cortina/gemini.c, hisilicon/hns3/hns3_enet.c). The first two also use napi_complete_done afterwards, which performs the gro_normal_list flush, so they are fine. The latter calls napi_gro_receive right after napi_gro_flush, so it can end up with non-empty napi->rx_list anyway. Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") Signed-off-by: Maxim Mikityanskiy Cc: Alexander Lobakin Cc: Edward Cree Acked-by: Alexander Lobakin Acked-by: Saeed Mahameed Acked-by: Edward Cree Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net-sysfs: Fix reference count leak

2020-01-29T15:45:21+00:00

[ Upstream commit cb626bf566eb4433318d35681286c494f04fedcc ] Netdev_register_kobject is calling device_initialize. In case of error reference taken by device_initialize is not given up. Drivers are supposed to call free_netdev in case of error. In non-error case the last reference is given up there and device release sequence is triggered. In error case this reference is kept and the release sequence is never started. Fix this by setting reg_state as NETREG_UNREGISTERED if registering fails. This is the rootcause for couple of memory leaks reported by Syzkaller: BUG: memory leak unreferenced object 0xffff8880675ca008 (size 256): comm "netdev_register", pid 281, jiffies 4294696663 (age 6.808s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000058ca4711>] kmem_cache_alloc_trace+0x167/0x280 [<000000002340019b>] device_add+0x882/0x1750 [<000000001d588c3a>] netdev_register_kobject+0x128/0x380 [<0000000011ef5535>] register_netdevice+0xa1b/0xf00 [<000000007fcf1c99>] __tun_chr_ioctl+0x20d5/0x3dd0 [<000000006a5b7b2b>] tun_chr_ioctl+0x2f/0x40 [<00000000f30f834a>] do_vfs_ioctl+0x1c7/0x1510 [<00000000fba062ea>] ksys_ioctl+0x99/0xb0 [<00000000b1c1b8d2>] __x64_sys_ioctl+0x78/0xb0 [<00000000984cabb9>] do_syscall_64+0x16f/0x580 [<000000000bde033d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<00000000e6ca2d9f>] 0xffffffffffffffff BUG: memory leak unreferenced object 0xffff8880668ba588 (size 8): comm "kobject_set_nam", pid 286, jiffies 4294725297 (age 9.871s) hex dump (first 8 bytes): 6e 72 30 00 cc be df 2b nr0....+ backtrace: [<00000000a322332a>] __kmalloc_track_caller+0x16e/0x290 [<00000000236fd26b>] kstrdup+0x3e/0x70 [<00000000dd4a2815>] kstrdup_const+0x3e/0x50 [<0000000049a377fc>] kvasprintf_const+0x10e/0x160 [<00000000627fc711>] kobject_set_name_vargs+0x5b/0x140 [<0000000019eeab06>] dev_set_name+0xc0/0xf0 [<0000000069cb12bc>] netdev_register_kobject+0xc8/0x320 [<00000000f2e83732>] register_netdevice+0xa1b/0xf00 [<000000009e1f57cc>] __tun_chr_ioctl+0x20d5/0x3dd0 [<000000009c560784>] tun_chr_ioctl+0x2f/0x40 [<000000000d759e02>] do_vfs_ioctl+0x1c7/0x1510 [<00000000351d7c31>] ksys_ioctl+0x99/0xb0 [<000000008390040a>] __x64_sys_ioctl+0x78/0xb0 [<0000000052d196b7>] do_syscall_64+0x16f/0x580 [<0000000019af9236>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<00000000bc384531>] 0xffffffffffffffff v3 -> v4: Set reg_state to NETREG_UNREGISTERED if registering fails v2 -> v3: * Replaced BUG_ON with WARN_ON in free_netdev and netdev_release v1 -> v2: * Relying on driver calling free_netdev rather than calling put_device directly in error path Reported-by: syzbot+ad8ca40ecd77896d51e2@syzkaller.appspotmail.com Cc: David Miller Cc: Greg Kroah-Hartman Cc: Lukas Bulwahn Signed-off-by: Jouni Hogander Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: rtnetlink: validate IFLA_MTU attribute in rtnl_create_link()

2020-01-29T15:45:21+00:00

[ Upstream commit d836f5c69d87473ff65c06a6123e5b2cf5e56f5b ] rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu checks that we apply in do_setlink() Otherwise malicious users can crash the kernel, for example after an integer overflow : BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline] BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192 memset+0x24/0x40 mm/kasan/common.c:108 memset include/linux/string.h:365 [inline] __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664 sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242 sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259 mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609 add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713 add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:1970 [inline] mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786 __do_softirq+0x262/0x98c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x19b/0x1e0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79 RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54 RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361 rest_init+0x23b/0x371 init/main.c:451 arch_call_rest_init+0xe/0x1b start_kernel+0x904/0x943 init/main.c:784 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242 The buggy address belongs to the page: page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()

2020-01-23T07:22:49+00:00

[ Upstream commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 ] syzbot reported some bogus lockdep warnings, for example bad unlock balance in sch_direct_xmit(). They are due to a race condition between slow path and fast path, that is qdisc_xmit_lock_key gets re-registered in netdev_update_lockdep_key() on slow path, while we could still acquire the queue->_xmit_lock on fast path in this small window: CPU A CPU B __netif_tx_lock(); lockdep_unregister_key(qdisc_xmit_lock_key); __netif_tx_unlock(); lockdep_register_key(qdisc_xmit_lock_key); In fact, unlike the addr_list_lock which has to be reordered when the master/slave device relationship changes, queue->_xmit_lock is only acquired on fast path and only when NETIF_F_LLTX is not set, so there is likely no nested locking for it. Therefore, we can just get rid of re-registration of qdisc_xmit_lock_key. Reported-by: syzbot+4ec99438ed7450da6272@syzkaller.appspotmail.com Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Cc: Taehee Yoo Signed-off-by: Cong Wang Acked-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/sched: annotate lockless accesses to qdisc->empty

2020-01-09T09:20:02+00:00

commit 90b2be27bb0e56483f335cc10fb59ec66882b949 upstream. KCSAN reported the following race [1] BUG: KCSAN: data-race in __dev_queue_xmit / net_tx_action read to 0xffff8880ba403508 of 1 bytes by task 21814 on cpu 1: __dev_xmit_skb net/core/dev.c:3389 [inline] __dev_queue_xmit+0x9db/0x1b40 net/core/dev.c:3761 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip6_finish_output2+0x873/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880ba403508 of 1 bytes by interrupt on cpu 0: qdisc_run_begin include/net/sch_generic.h:160 [inline] qdisc_run include/net/pkt_sched.h:120 [inline] net_tx_action+0x2b1/0x6c0 net/core/dev.c:4551 __do_softirq+0x115/0x33f kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337 do_softirq kernel/softirq.c:329 [inline] __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189 local_bh_enable include/linux/bottom_half.h:32 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] ip6_finish_output2+0x7bb/0xec0 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 21817 Comm: syz-executor.2 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: d518d2ed8640 ("net/sched: fix race between deactivation and dequeue for NOLOCK qdisc") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Paolo Abeni Cc: Davide Caratti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

inet: protect against too small mtu values.

2019-12-18T15:08:17+00:00

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix installing orphaned programs

2019-11-01T22:16:01+00:00

When netdevice with offloaded BPF programs is destroyed the programs are orphaned and removed from the program IDA - their IDs get released (the programs may remain accessible via existing open file descriptors and pinned files). After IDs are released they are set to 0. This confuses dev_change_xdp_fd() because it compares the __dev_xdp_query() result where 0 means no program with prog->aux->id where 0 means orphaned. dev_change_xdp_fd() would have incorrectly returned success even though it had not installed the program. Since drivers already catch this case via bpf_offload_dev_match() let them handle this case. The error message drivers produce in this case ("program loaded for a different device") is in fact correct as the orphaned program must had to be loaded for a different device. Fixes: c14a9f633d9e ("net: Don't call XDP_SETUP_PROG when nothing is changed") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

netns: fix GFP flags in rtnl_net_notifyid()

2019-10-26T03:14:42+00:00

In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances, but there are a few paths calling rtnl_net_notifyid() from atomic context or from RCU critical sections. The later also precludes the use of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new() call is wrong too, as it uses GFP_KERNEL unconditionally. Therefore, we need to pass the GFP flags as parameter and propagate it through function calls until the proper flags can be determined. In most cases, GFP_KERNEL is fine. The exceptions are: * openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump() indirectly call rtnl_net_notifyid() from RCU critical section, * rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as parameter. Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used by nlmsg_new(). The function is allowed to sleep, so better make the flags consistent with the ones used in the following ovs_vport_cmd_fill_info() call. Found by code inspection. Fixes: 9a9634545c70 ("netns: notify netns id events") Signed-off-by: Guillaume Nault Acked-by: Nicolas Dichtel Acked-by: Pravin B Shelar Signed-off-by: David S. Miller

net: remove unnecessary variables and callback

2019-10-24T21:53:49+00:00

This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

net: core: add ignore flag to netdev_adjacent structure

2019-10-24T21:53:48+00:00

In order to link an adjacent node, netdev_upper_dev_link() is used and in order to unlink an adjacent node, netdev_upper_dev_unlink() is used. unlink operation does not fail, but link operation can fail. In order to exchange adjacent nodes, we should unlink an old adjacent node first. then, link a new adjacent node. If link operation is failed, we should link an old adjacent node again. But this link operation can fail too. It eventually breaks the adjacent link relationship. This patch adds an ignore flag into the netdev_adjacent structure. If this flag is set, netdev_upper_dev_link() ignores an old adjacent node for a moment. This patch also adds new functions for other modules. netdev_adjacent_change_prepare() netdev_adjacent_change_commit() netdev_adjacent_change_abort() netdev_adjacent_change_prepare() inserts new device into adjacent list but new device is not allowed to use immediately. If netdev_adjacent_change_prepare() fails, it internally rollbacks adjacent list so that we don't need any other action. netdev_adjacent_change_commit() deletes old device in the adjacent list and allows new device to use. netdev_adjacent_change_abort() rollbacks adjacent list. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller