BMC/Intel-BMC/linux.git/net/ceph/osd_client.c, branch dev-5.2

libceph: fix PG split vs OSD (re)connect race

2019-08-29T06:30:22+00:00

commit a561372405cf6bc6f14239b3a9e57bb39f2788b0 upstream. We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: stable@vger.kernel.org Fixes: 7de030d6b10a ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162 Reported-by: Jerry Lee Signed-off-by: Ilya Dryomov Tested-by: Jerry Lee Reviewed-by: Jeff Layton Signed-off-by: Greg Kroah-Hartman

Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client

2019-05-16T23:24:01+00:00

Pull ceph updates from Ilya Dryomov: "On the filesystem side we have: - a fix to enforce quotas set above the mount point (Luis Henriques) - support for exporting snapshots through NFS (Zheng Yan) - proper statx implementation (Jeff Layton). statx flags are mapped to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account. - some follow-up dentry name handling fixes, in particular elimination of our hand-rolled helper and the switch to __getname() as suggested by Al (Jeff Layton) - a set of MDS client cleanups in preparation for async MDS requests in the future (Jeff Layton) - a fix to sync the filesystem before remounting (Jeff Layton) On the rbd side, work is on-going on object-map and fast-diff image features" * tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits) ceph: flush dirty inodes before proceeding with remount ceph: fix unaligned access in ceph_send_cap_releases libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer libceph: fix unaligned accesses in ceph_entity_addr handling rbd: don't assert on writes to snapshots rbd: client_mutex is never nested ceph: print inode number in __caps_issued_mask debugging messages ceph: just call get_session in __ceph_lookup_mds_session ceph: simplify arguments and return semantics of try_get_cap_refs ceph: fix comment over ceph_drop_caps_for_unlink ceph: move wait for mds request into helper function ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request ceph: after an MDS request, do callback and completions ceph: use pathlen values returned by set_request_path_attr ceph: use __getname/__putname in ceph_mdsc_build_path ceph: use ceph_mdsc_build_path instead of clone_dentry_name ceph: fix potential use-after-free in ceph_mdsc_build_path ceph: dump granular cap info in "caps" debugfs file ceph: make iterate_session_caps a public symbol ceph: fix NULL pointer deref when debugging is enabled ...

libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer

2019-05-07T17:43:05+00:00

GCC9 is throwing a lot of warnings about unaligned accesses by callers of ceph_pr_addr. All of the current callers are passing a pointer to the sockaddr inside struct ceph_entity_addr. Fix it to take a pointer to a struct ceph_entity_addr instead, and then have the function make a copy of the sockaddr before printing it. Signed-off-by: Jeff Layton Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

2019-04-09T12:19:06+00:00

%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^$tools\|Documentation$/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus Acked-by: David Sterba (for btrfs) Acked-by: Mike Rapoport (for mm/memblock.c) Acked-by: Bjorn Helgaas (for drivers/pci) Acked-by: Rafael J. Wysocki Signed-off-by: Petr Mladek

libceph: allow setting abort_on_full for rbd

2019-01-07T21:47:48+00:00

Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov

libceph: support the RADOS copy-from operation

2018-10-22T08:28:23+00:00

Add support for performing remote object copies using the 'copy-from' operation. [ Add COPY_FROM to get_num_data_items(). ] Signed-off-by: Luis Henriques Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov

libceph: check reply num_data_items in setup_request_data()

2018-10-22T08:28:23+00:00

setup_request_data() adds message data items to both request and reply messages, but only checks request num_data_items before proceeding with the loop. This is wrong because if an op doesn't have any request data items but has a reply data item (e.g. read), a duplicate data item gets added to the message on every resend attempt. This went unnoticed for years but now that message data items are preallocated, it promptly crashes in ceph_msg_data_add(). Amend the signature to make it clear that setup_request_data() operates on both request and reply messages. Also, remove data_len assert -- we have another one in prepare_write_message(). Signed-off-by: Ilya Dryomov

libceph: preallocate message data items

2018-10-22T08:28:22+00:00

Currently message data items are allocated with ceph_msg_data_create() in setup_request_data() inside send_request(). send_request() has never been allowed to fail, so each allocation is followed by a BUG_ON: data = ceph_msg_data_create(...); BUG_ON(!data); It's been this way since support for multiple message data items was added in commit 6644ed7b7e04 ("libceph: make message data be a pointer") in 3.10. There is no reason to delay the allocation of message data items until the last possible moment and we certainly don't need a linked list of them as they are only ever appended to the end and never erased. Make ceph_msg_new2() take max_data_items and adapt the rest of the code. Reported-by: Jerry Lee Signed-off-by: Ilya Dryomov

libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls

2018-10-22T08:28:22+00:00

The current requirement is that ceph_osdc_alloc_messages() should be called after oid and oloc are known. In preparation for preallocating message data items, move ceph_osdc_alloc_messages() further down, so that it is called when OSD op codes are known. Signed-off-by: Ilya Dryomov

libceph: introduce alloc_watch_request()

2018-10-22T08:28:22+00:00

ceph_osdc_alloc_messages() call will be moved out of alloc_linger_request() in the next commit, which means that ceph_osdc_watch() will need to call ceph_osdc_alloc_messages() twice. Add a helper for that. Signed-off-by: Ilya Dryomov