BMC/Intel-BMC/linux.git/net/bridge/br_if.c, branch dev

bridge: vlan: flush the dynamically learned entries on port vlan delete

2015-06-24T12:40:55+00:00

Add a new argument to br_fdb_delete_by_port which allows to specify a vid to match when flushing entries and use it in nbp_vlan_delete() to flush the dynamically learned entries of the vlan/port pair when removing a vlan from a port. Before this patch only the local mac was being removed and the dynamically learned ones were left to expire. Note that the do_all argument is still respected and if specified, the vid will be ignored. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: reset bridge mtu after deleting an interface

2015-03-14T23:12:38+00:00

On adding an interface br_add_if() sets the MTU to the min of all the interfaces. Do the same thing on removing an interface too in br_del_if. Signed-off-by: Venkat Venkatsubra Acked-by: Roopa Prabhu Signed-off-by: David S. Miller

net: bridge: reject DSA-enabled master netdevices as bridge members

2015-01-19T20:45:10+00:00

DSA-enabled master network devices with a switch tagging protocol should strip the protocol specific format before handing the frame over to higher layer. When adding such a DSA master network device as a bridge member, we go through the following code path when receiving a frame: __netif_receive_skb_core -> first ptype check against ptype_all is not returning any handler for this skb -> check and invoke rx_handler: -> deliver frame to the bridge layer: br_handle_frame DSA registers a ptype handler with the fake ETH_XDSA ethertype, which is called *after* the bridge-layer rx_handler has run. br_handle_frame() tries to parse the frame it received from the DSA master network device, and will not be able to match any of its conditions and jumps straight at the end of the end of br_handle_frame() and returns RX_HANDLER_CONSUMED there. Since we returned RX_HANDLER_CONSUMED, __netif_receive_skb_core() stops RX processing for this frame and returns NET_RX_SUCCESS, so we never get a chance to call our switch tag packet processing logic and deliver frames to the DSA slave network devices, and so we do not get any functional bridge members at all. Instead of cluttering the bridge receive path with DSA-specific checks, and rely on assumptions about how __netif_receive_skb_core() is processing frames, we simply deny adding the DSA master network device (conduit interface) as a bridge member, leaving only the slave DSA network devices to be bridge members, since those will work correctly in all circumstances. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

bridge: Add ability to enable TSO

2015-01-12T21:18:09+00:00

Currently a bridge device turns off TSO feature if no bridge ports support it. We can always enable it, since packets can be segmented on ports by software as well as on the bridge device. This will reduce the number of packets processed in the bridge. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller

bridge: Add filtering support for default_pvid

2014-10-06T01:21:37+00:00

Currently when vlan filtering is turned on on the bridge, the bridge will drop all traffic untill the user configures the filter. This isn't very nice for ports that don't care about vlans and just want untagged traffic. A concept of a default_pvid was recently introduced. This patch adds filtering support for default_pvid. Now, ports that don't care about vlans and don't define there own filter will belong to the VLAN of the default_pvid and continue to receive untagged traffic. This filtering can be disabled by setting default_pvid to 0. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller

net: bridge: add a br_set_state helper function

2014-10-02T02:03:50+00:00

In preparation for being able to propagate port states to e.g: notifiers or other kernel parts, do not manipulate the port state directly, but instead use a helper function which will allow us to do a bit more than just setting the state. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

bridge: switch order of rx_handler reg and upper dev link

2014-09-09T18:29:54+00:00

The thing is that netdev_master_upper_dev_link calls call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl link message and during that, rtnl_link_ops->fill_slave_info is called. But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set yet so there would have to be check for that in fill_slave_info callback. Resolve this by reordering to similar what bonding and team does to avoid the check. Also add removal of IFF_BRIDGE_PORT flag into error path. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: set name_assign_type in alloc_netdev()

2014-07-15T23:12:48+00:00

Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Signed-off-by: David S. Miller

bridge: Fix incorrect judgment of promisc

2014-06-05T22:20:31+00:00

br_manage_promisc() incorrectly expects br_auto_port() to return only 0 or 1, while it actually returns flags, i.e., a subset of BR_AUTO_MASK. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller

bridge: fix the unbalanced promiscuous count when add_if failed

2014-06-02T05:05:16+00:00

As commit 2796d0c648c94 ("bridge: Automatically manage port promiscuous mode."), make the add_if use dev_set_allmulti instead of dev_set_promiscuous, so when add_if failed, we should do dev_set_allmulti(dev, -1). Signed-off-by: Wang Weidong Reviewed-by: Amos Kong Acked-by: Vlad Yasevich Acked-by: Stephen Hemminger Signed-off-by: David S. Miller