BMC/Intel-BMC/linux.git/net/8021q/vlan_dev.c, branch dev-4.6

vlan: propagate gso_max_segs

2016-03-18T01:05:01+00:00

vlan drivers lack proper propagation of gso_max_segs from lower device. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net: 8021q: use __ethtool_get_ksettings

2016-02-26T03:06:46+00:00

Signed-off-by: David Decotigny Signed-off-by: David S. Miller

vlan: turn on unicast filtering on vlan device

2016-02-22T02:54:05+00:00

Currently vlan device inherits unicast filtering flag from underlying device. If underlying device doesn't support unicast filter, this will put vlan device into promiscuous mode when it's stacked. Tun on IFF_UNICAST_FLT on the vlan device in any case so that it does not go into promiscuous mode needlessly. If underlying device does not support unicast filtering, that device will enter promiscuous mode. Signed-off-by: Zhang Shengju Signed-off-by: David S. Miller

net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK

2015-12-15T21:50:08+00:00

The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC

2015-12-15T21:49:58+00:00

The SCTP checksum is really a CRC and is very different from the standards 1's complement checksum that serves as the checksum for IP protocols. This offload interface is also very different. Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these differences. The term CSUM should be reserved in the stack to refer to the standard 1's complement IP checksum. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

switchdev: vlan: Use switchdev_port* in vlan_netdev_ops

2015-12-15T16:58:20+00:00

We need to be able to propagate static FDB entries and certain bridge port attributes (e.g. learning, flooding) down to the port netdev driver when bridge port is a VLAN interface. Achieve that by setting ndo_bridge* and ndo_fdb* in vlan_netdev_ops to the corresponding switchdev_port* functions. This is consistent with team and bond devices. Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: 8021q: convert to using IFF_NO_QUEUE

2015-08-18T18:55:06+00:00

Signed-off-by: Phil Sutter Cc: Patrick McHardy Signed-off-by: David S. Miller

vlan: implement ndo_get_iflink

2015-04-02T18:05:00+00:00

Don't use dev->iflink anymore. CC: Patrick McHardy Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller

vlan: Add features for stacked vlan device

2015-03-29T20:33:21+00:00

Stacked vlan devices curretly have few features (GRO, HIGHDMA, LLTX). Since we have software fallbacks in case the NIC can not handle some features for multiple vlans, we can add the same features as the lower vlan devices for stacked vlan devices. This allows stacked vlan devices to create large (GSO) packets and not to segment packets. Those packets will be segmented by software on the real device, or even can be segmented by the NIC once TSO for multiple vlans becomes enabled by the following patches. The exception is those related to FCoE, which does not have a software fallback. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller

8021q: Use eth__addr instead of memset

2015-03-03T22:01:37+00:00

Use the built-in function instead of memset. Signed-off-by: Joe Perches Signed-off-by: David S. Miller