BMC/Intel-BMC/linux.git/kernel/power/hibernate.c, branch dev-5.0

PM / reboot: Eliminate race between reboot and suspend

2018-08-06T10:35:20+00:00

At present, "systemctl suspend" and "shutdown" can run in parrallel. A system can suspend after devices_shutdown(), and resume. Then the shutdown task goes on to power off. This causes many devices are not really shut off. Hence replacing reboot_mutex with system_transition_mutex (renamed from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as system_transition_mutex can be better to reflect the purpose of the mutex. Signed-off-by: Pingfan Liu Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / hibernate: Mark expected switch fall-through

2018-08-06T08:32:32+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This addresses Coverity-ID: 114713 ("Missing break in switch"). Signed-off-by: Gustavo A. R. Silva Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / suspend: Prevent might sleep splats

2018-05-27T09:55:02+00:00

timekeeping suspend/resume calls read_persistent_clock() which takes rtc_lock. That results in might sleep warnings because at that point we run with interrupts disabled. We cannot convert rtc_lock to a raw spinlock as that would trigger other might sleep warnings. As a workaround we disable the might sleep warnings by setting system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock contention because hibernate / suspend to RAM is single-CPU at this point. In s2idle's case the system_state is set to SYSTEM_SUSPEND before timekeeping_suspend() which is invoked by the last CPU. In the resume case it set back to SYSTEM_RUNNING after timekeeping_resume() which is invoked by the first CPU in the resume case. The other CPUs will block on tick_freeze_lock. Signed-off-by: Thomas Gleixner [bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-04-03T17:45:39+00:00

Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ...

fs: add ksys_sync() helper; remove in-kernel calls to sys_sync()

2018-04-02T18:16:05+00:00

Using this helper allows us to avoid the in-kernel calls to the sys_sync() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_sync(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro Signed-off-by: Dominik Brodowski

PM / hibernate: Change message when writing to /sys/power/resume

2018-03-30T10:01:20+00:00

This file is used both for setting the wakeup device without kernel command line as well as for actually waking the system (when appropriate swap header is in place). To avoid confusion on incorrect logs in system log downgrade the message to debug and make it clearer. Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki

PM / hibernate: Make passing hibernate offsets more friendly

2018-03-30T10:01:20+00:00

Currently the only way to specify a hibernate offset for a swap file is on the kernel command line. Add a new /sys/power/resume_offset that lets userspace specify the offset and disk to use when initiating a hibernate cycle. Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki

PM / sleep: Mark suspend/hibernation start and finish

2017-07-22T00:33:03+00:00

Regardless of whether or not debug messages from the core system suspend/hibernation code are enabled, it is useful to know when system-wide transitions start and finish (or fail), so print "info" messages at these points. Signed-off-by: Rafael J. Wysocki Acked-by: Mark Salyzyn

PM / sleep: Do not print debug messages by default

2017-07-22T00:31:27+00:00

Debug messages from the system suspend/hibernation infrastructure can fill up the entire kernel log buffer in some cases and anyway they are only useful for debugging. They depend on CONFIG_PM_DEBUG, but that is set as a rule as some generally useful diagnostic facilities depend on it too. For this reason, avoid printing those messages by default, but make it possible to turn them on as needed with the help of a new sysfs attribute under /sys/power/. Signed-off-by: Rafael J. Wysocki

PM: hibernate: constify attribute_group structures.

2017-06-29T21:05:48+00:00

attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 6332 488 308 7128 1bd8 kernel/power/hibernate.o File size After adding 'const': text data bss dec hex filename 6396 424 308 7128 1bd8 kernel/power/hibernate.o Signed-off-by: Arvind Yadav Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki