BMC/Intel-BMC/linux.git/include, branch v4.18.6

scsi: sysfs: Introduce sysfs_{un,}break_active_protection()

2018-09-05T07:29:54+00:00

commit 2afc9166f79b8f6da5f347f48515215ceee4ae37 upstream. Introduce these two functions and export them such that the next patch can add calls to these functions from the SCSI core. Signed-off-by: Bart Van Assche Acked-by: Tejun Heo Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

tpm: separate cmd_ready/go_idle from runtime_pm

2018-09-05T07:29:53+00:00

commit 627448e85c766587f6fdde1ea3886d6615081c77 upstream. Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

x86/gpu: reserve ICL's graphics stolen memory

2018-09-05T07:29:47+00:00

commit db0c8d8b031d2b5960f6407f7f2ca20e97e00605 upstream. ICL changes the registers and addresses to 64 bits. I also briefly looked at implementing an u64 version of the PCI config read functions, but I concluded this wouldn't be trivial, so it's not worth doing it for a single user that can't have any racing problems while reading the register in two separate operations. v2: - Scrub the development (non-public) changelog (Joonas). - Remove the i915.ko bits so this can be easily backported in order to properly avoid stolen memory even on machines without i915.ko (Joonas). - CC stable for the reasons above. Issue: VIZ-9250 CC: stable@vger.kernel.org Cc: Ingo Molnar Cc: H. Peter Anvin Cc: x86@kernel.org Cc: Daniele Ceraolo Spurio Cc: Joonas Lahtinen Signed-off-by: Paulo Zanoni Fixes: 412310019a20 ("drm/i915/icl: Add initial Icelake definitions.") Reviewed-by: Joonas Lahtinen Acked-by: Ingo Molnar Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-1-paulo.r.zanoni@intel.com Signed-off-by: Greg Kroah-Hartman

printk/nmi: Prevent deadlock when accessing the main log buffer in NMI

2018-09-05T07:29:42+00:00

commit 03fc7f9c99c1e7ae2925d459e8487f1a6f199f79 upstream. The commit 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") brought back the possible deadlocks in printk() and NMI. The check of logbuf_lock is done only in printk_nmi_enter() to prevent mixed output. But another CPU might take the lock later, enter NMI, and: + Both NMIs might be serialized by yet another lock, for example, the one in nmi_cpu_backtrace(). + The other CPU might get stopped in NMI, see smp_send_stop() in panic(). The only safe solution is to use trylock when storing the message into the main log-buffer. It might cause reordering when some lines go to the main lock buffer directly and others are delayed via the per-CPU buffer. It means that it is not useful in general. This patch replaces the problematic NMI deferred context with NMI direct context. It can be used to mark a code that might produce many messages in NMI and the risk of losing them is more critical than problems with eventual reordering. The context is then used when dumping trace buffers on oops. It was the primary motivation for the original fix. Also the reordering is even smaller issue there because some traces have their own time stamps. Finally, nmi_cpu_backtrace() need not longer be serialized because it will always us the per-CPU buffers again. Fixes: 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com To: Steven Rostedt Cc: Peter Zijlstra Cc: Tetsuo Handa Cc: Sergey Senozhatsky Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Sergey Senozhatsky Signed-off-by: Petr Mladek Signed-off-by: Greg Kroah-Hartman

scsi: libsas: dynamically allocate and free ata host

2018-09-05T07:29:40+00:00

commit 2fa4a32613c9182b00e46872755b0662374424a7 upstream. Commit 2623c7a5f2 ("libata: add refcounting to ata_host") v4.17+ introduced refcounting to ata_host and will increase or decrease the refcount when adding or deleting transport ATA port. Now the ata host for libsas is embedded in domain_device, and the ->kref member is not initialized. Afer we add ata transport class, ata_host_get() will be called when adding transport ATA port and a warning will be triggered as below: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 103 at lib/refcount.c:153 refcount_inc+0x40/0x48 ...... Call trace: refcount_inc+0x40/0x48 ata_host_get+0x10/0x18 ata_tport_add+0x40/0x120 ata_sas_tport_add+0xc/0x14 sas_ata_init+0x7c/0xc8 sas_discover_domain+0x380/0x53c process_one_work+0x12c/0x288 worker_thread+0x58/0x3f0 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 And also when removing transport ATA port ata_host_put() will be called and another similar warning will be triggered. If the refcount decreased to zero, the ata host will be freed. But this ata host is only part of domain_device, it cannot be freed directly. So we have to change this embedded static ata host to a dynamically allocated ata host and initialize the ->kref member. To use ata_host_get() and ata_host_put() in libsas, we need to move the declaration of these functions to the public libata.h and export them. Fixes: b6240a4df018 ("scsi: libsas: add transport class for ATA devices") Signed-off-by: Jason Yan CC: John Garry CC: Taras Kondratiuk CC: Tejun Heo Acked-by: Tejun Heo Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ioremap: Update pgtable free interfaces with addr

2018-08-17T19:03:49+00:00

commit 785a19f9d1dd8a4ab2d0633be4656653bd3de1fc upstream. The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya Signed-off-by: Toshi Kani Signed-off-by: Thomas Gleixner Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon Cc: Joerg Roedel Cc: stable@vger.kernel.org Cc: Andrew Morton Cc: Michal Hocko Cc: "H. Peter Anvin" Cc: Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com Signed-off-by: Greg Kroah-Hartman

crypto: vmac - separate tfm and request context

2018-08-17T19:03:48+00:00

commit bb29648102335586e9a66289a1d98a0cb392b6e5 upstream. syzbot reported a crash in vmac_final() when multiple threads concurrently use the same "vmac(aes)" transform through AF_ALG. The bug is pretty fundamental: the VMAC template doesn't separate per-request state from per-tfm (per-key) state like the other hash algorithms do, but rather stores it all in the tfm context. That's wrong. Also, vmac_final() incorrectly zeroes most of the state including the derived keys and cached pseudorandom pad. Therefore, only the first VMAC invocation with a given key calculates the correct digest. Fix these bugs by splitting the per-tfm state from the per-request state and using the proper init/update/final sequencing for requests. Reproducer for the crash: #include #include #include int main() { int fd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "vmac(aes)", }; char buf[256] = { 0 }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buf, 16); fork(); fd = accept(fd, NULL, NULL); for (;;) write(fd, buf, 256); } The immediate cause of the crash is that vmac_ctx_t.partial_size exceeds VMAC_NHBYTES, causing vmac_final() to memset() a negative length. Reported-by: syzbot+264bca3a6e8d645550d3@syzkaller.appspotmail.com Fixes: f1939f7c5645 ("crypto: vmac - New hash algorithm for intel_txt support") Cc: # v2.6.32+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Fix SMT supported evaluation

2018-08-15T15:37:33+00:00

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream. Josh reported that the late SMT evaluation in cpu_smt_state_init() sets cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied on the kernel command line as it cannot differentiate between SMT disabled by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and makes the sysfs interface unusable. Rework this so that during bringup of the non boot CPUs the availability of SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a 'primary' thread then set the local cpu_smt_available marker and evaluate this explicitely right after the initial SMP bringup has finished. SMT evaulation on x86 is a trainwreck as the firmware has all the information _before_ booting the kernel, but there is no interface to query it. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Unbreak !__HAVE_ARCH_PFN_MODIFY_ALLOWED architectures

2018-08-15T15:37:31+00:00

commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24 upstream. pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the !__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g. ia64) and breaks build: include/asm-generic/pgtable.h: Assembler messages: include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)' include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true' include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)' include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false' arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle Move those two static inlines into the !__ASSEMBLY__ section so that they don't confuse the asm build pass. Fixes: 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by: Jiri Kosina Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Set CPU_SMT_NOT_SUPPORTED early

2018-08-15T15:37:30+00:00

commit fee0aede6f4739c87179eca76136f83210953b86 upstream. The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support SMT) when the sysfs SMT control file is initialized. That was fine so far as this was only required to make the output of the control file correct and to prevent writes in that case. With the upcoming l1tf command line parameter, this needs to be set up before the L1TF mitigation selection and command line parsing happens. Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de Signed-off-by: Greg Kroah-Hartman