BMC/Intel-BMC/linux.git/include/uapi, branch dev-5.3

Merge tag 'v5.3.15' into dev-5.3

2019-12-11T22:32:06+00:00

This is the 5.3.15 stable release Signed-off-by: Joel Stanley

devlink: Add method for time-stamp on reporter's dump

2019-11-20T15:49:01+00:00

[ Upstream commit d279505b723cba058b604ed8cf9cd4c854e2a041 ] When setting the dump's time-stamp, use ktime_get_real in addition to jiffies. This simplifies the user space implementation and bypasses some inconsistent behavior with translating jiffies to current time. The time taken is transformed into nsec, to comply with y2038 issue. Fixes: c8e1da0bf923 ("devlink: Add health report functionality") Signed-off-by: Aya Levin Acked-by: Jiri Pirko Acked-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Merge tag 'v5.3.10' into dev-5.3

2019-11-11T01:17:54+00:00

This is the 5.3.10 stable release Signed-off-by: Joel Stanley

Revert "nvme: allow 64-bit results in passthru commands"

2019-11-06T12:09:35+00:00

This reverts commit 76d609da9ed1cc0dc780e2b539d7b827ce28f182. The patch adds new functionality and shouldn't have been backported. Signed-off-by: Sasha Levin

Merge tag 'v5.3.8' into dev-5.3

2019-10-30T15:00:42+00:00

This is the 5.3.8 stable release Signed-off-by: Joel Stanley

nvme: allow 64-bit results in passthru commands

2019-10-29T08:21:31+00:00

[ Upstream commit 65e68edce0db433aa0c2b26d7dc14fbbbeb89fbb ] It is not possible to get 64-bit results from the passthru commands, what prevents from getting for the Capabilities (CAP) property value. As a result, it is not possible to implement IOL's NVMe Conformance test 4.3 Case 1 for Fabrics targets [1] (page 123). This issue has been already discussed [2], but without a solution. This patch solves the problem by adding new ioctls with a new passthru structure, including 64-bit results. The older ioctls stay unchanged. [1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf [2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html Signed-off-by: Marta Rybczynska Reviewed-by: Keith Busch Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin

Merge tag 'v5.3.6' into dev-5.3

2019-10-14T01:24:00+00:00

This is the 5.3.6 stable release

sched: Add ASSEMBLY guards around struct clone_args

2019-10-11T16:36:20+00:00

commit 61129dd29f7962f278b618a2a3e8fdb986a66dc8 upstream. The addition of struct clone_args to uapi/linux/sched.h is not protected by __ASSEMBLY__ guards, causing a failure to build from source for glibc on RISC-V. Add the guards to fix this. Fixes: 7f192e3cd316 ("fork: add clone3") Signed-off-by: Seth Forshee Cc: Acked-by: Ingo Molnar Link: https://lore.kernel.org/r/20190917071853.12385-1-seth.forshee@canonical.com Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman

peci: Add support for PECI bus driver core

2019-09-16T03:30:02+00:00

This commit adds driver implementation for PECI bus core into linux driver framework. PECI (Platform Environment Control Interface) is a one-wire bus interface that provides a communication channel from Intel processors and chipset components to external monitoring or control devices. PECI is designed to support the following sideband functions: * Processor and DRAM thermal management - Processor fan speed control is managed by comparing Digital Thermal Sensor (DTS) thermal readings acquired via PECI against the processor-specific fan speed control reference point, or TCONTROL. Both TCONTROL and DTS thermal readings are accessible via the processor PECI client. These variables are referenced to a common temperature, the TCC activation point, and are both defined as negative offsets from that reference. - PECI based access to the processor package configuration space provides a means for Baseboard Management Controllers (BMC) or other platform management devices to actively manage the processor and memory power and thermal features. * Platform Manageability - Platform manageability functions including thermal, power, and error monitoring. Note that platform 'power' management includes monitoring and control for both the processor and DRAM subsystem to assist with data center power limiting. - PECI allows read access to certain error registers in the processor MSR space and status monitoring registers in the PCI configuration space within the processor and downstream devices. - PECI permits writes to certain registers in the processor PCI configuration space. * Processor Interface Tuning and Diagnostics - Processor interface tuning and diagnostics capabilities (Intel Interconnect BIST). The processors Intel Interconnect Built In Self Test (Intel IBIST) allows for infield diagnostic capabilities in the Intel UPI and memory controller interfaces. PECI provides a port to execute these diagnostics via its PCI Configuration read and write capabilities. * Failure Analysis - Output the state of the processor after a failure for analysis via Crashdump. PECI uses a single wire for self-clocking and data transfer. The bus requires no additional control lines. The physical layer is a self-clocked one-wire bus that begins each bit with a driven, rising edge from an idle level near zero volts. The duration of the signal driven high depends on whether the bit value is a logic '0' or logic '1'. PECI also includes variable data transfer rate established with every message. In this way, it is highly flexible even though underlying logic is simple. The interface design was optimized for interfacing between an Intel processor and chipset components in both single processor and multiple processor environments. The single wire interface provides low board routing overhead for the multiple load connections in the congested routing area near the processor and chipset components. Bus speed, error checking, and low protocol overhead provides adequate link bandwidth and reliability to transfer critical device operating conditions and configuration information. This implementation provides the basic framework to add PECI extensions to the Linux bus and device models. A hardware specific 'Adapter' driver can be attached to the PECI bus to provide sideband functions described above. It is also possible to access all devices on an adapter from userspace through the /dev interface. A device specific 'Client' driver also can be attached to the PECI bus so each processor client's features can be supported by the 'Client' driver through an adapter connection in the bus. OpenBMC-Staging-Count: 5 Signed-off-by: Jae Hyun Yoo Signed-off-by: Fengguang Wu Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery [joel: Fix access_ok usage for 5.0] Signed-off-by: Joel Stanley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-14T19:20:38+00:00

Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...