BMC/Intel-BMC/linux.git/include/uapi, branch dev-5.0

drivers/misc: Add Aspeed P2A control driver

2019-04-29T08:48:04+00:00

The ASPEED AST2400, and AST2500 in some configurations include a PCI-to-AHB MMIO bridge. This bridge allows a server to read and write in the BMC's physical address space. This feature is especially useful when using this bridge to send large files to the BMC. The host may use this to send down a firmware image by staging data at a specific memory address, and in a coordinated effort with the BMC's software stack and kernel, transmit the bytes. This driver enables the BMC to unlock the PCI bridge on demand, and configure it via ioctl to allow the host to write bytes to an agreed upon location. In the primary use-case, the region to use is known apriori on the BMC, and the host requests this information. Once this request is received, the BMC's software stack will enable the bridge and the region and then using some software flow control (possibly via IPMI packets), copy the bytes down. Once the process is complete, the BMC will disable the bridge and unset any region involved. The default behavior of this bridge when present is: enabled and all regions marked read-write. This driver will fix the regions to be read-only and then disable the bridge entirely. The memory regions protected are: * BMC flash MMIO window * System flash MMIO windows * SOC IO (peripheral MMIO) * DRAM The DRAM region itself is all of DRAM and cannot be further specified. Once the PCI bridge is enabled, the host can read all of DRAM, and if the DRAM section is write-enabled, then it can write to all of it. Signed-off-by: Patrick Venture Reviewed-by: Andrew Jeffery Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 01c60dcea9f7a97ed0e94245e425002a8ddd6c17) Signed-off-by: Joel Stanley

peci: Add support for PECI bus driver core

2019-03-20T04:43:33+00:00

This commit adds driver implementation for PECI bus core into linux driver framework. PECI (Platform Environment Control Interface) is a one-wire bus interface that provides a communication channel from Intel processors and chipset components to external monitoring or control devices. PECI is designed to support the following sideband functions: * Processor and DRAM thermal management - Processor fan speed control is managed by comparing Digital Thermal Sensor (DTS) thermal readings acquired via PECI against the processor-specific fan speed control reference point, or TCONTROL. Both TCONTROL and DTS thermal readings are accessible via the processor PECI client. These variables are referenced to a common temperature, the TCC activation point, and are both defined as negative offsets from that reference. - PECI based access to the processor package configuration space provides a means for Baseboard Management Controllers (BMC) or other platform management devices to actively manage the processor and memory power and thermal features. * Platform Manageability - Platform manageability functions including thermal, power, and error monitoring. Note that platform 'power' management includes monitoring and control for both the processor and DRAM subsystem to assist with data center power limiting. - PECI allows read access to certain error registers in the processor MSR space and status monitoring registers in the PCI configuration space within the processor and downstream devices. - PECI permits writes to certain registers in the processor PCI configuration space. * Processor Interface Tuning and Diagnostics - Processor interface tuning and diagnostics capabilities (Intel Interconnect BIST). The processors Intel Interconnect Built In Self Test (Intel IBIST) allows for infield diagnostic capabilities in the Intel UPI and memory controller interfaces. PECI provides a port to execute these diagnostics via its PCI Configuration read and write capabilities. * Failure Analysis - Output the state of the processor after a failure for analysis via Crashdump. PECI uses a single wire for self-clocking and data transfer. The bus requires no additional control lines. The physical layer is a self-clocked one-wire bus that begins each bit with a driven, rising edge from an idle level near zero volts. The duration of the signal driven high depends on whether the bit value is a logic '0' or logic '1'. PECI also includes variable data transfer rate established with every message. In this way, it is highly flexible even though underlying logic is simple. The interface design was optimized for interfacing between an Intel processor and chipset components in both single processor and multiple processor environments. The single wire interface provides low board routing overhead for the multiple load connections in the congested routing area near the processor and chipset components. Bus speed, error checking, and low protocol overhead provides adequate link bandwidth and reliability to transfer critical device operating conditions and configuration information. This implementation provides the basic framework to add PECI extensions to the Linux bus and device models. A hardware specific 'Adapter' driver can be attached to the PECI bus to provide sideband functions described above. It is also possible to access all devices on an adapter from userspace through the /dev interface. A device specific 'Client' driver also can be attached to the PECI bus so each processor client's features can be supported by the 'Client' driver through an adapter connection in the bus. OpenBMC-Staging-Count: 2 Signed-off-by: Jae Hyun Yoo Signed-off-by: Fengguang Wu Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery [joel: Fix access_ok usage for 5.0] Signed-off-by: Joel Stanley

binder: create node flag to request sender's security context

2019-03-10T06:08:57+00:00

commit ec74136ded792deed80780a2f8baf3521eeb72f9 upstream. To allow servers to verify client identity, allow a node flag to be set that causes the sender's security context to be delivered with the transaction. The BR_TRANSACTION command is extended in BR_TRANSACTION_SEC_CTX to contain a pointer to the security context string. Signed-off-by: Todd Kjos Reviewed-by: Joel Fernandes (Google) Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-02-15T16:00:11+00:00

Pull networking fixes from David Miller: 1) Fix MAC address setting in mac80211 pmsr code, from Johannes Berg. 2) Probe SFP modules after being attached, from Russell King. 3) Byte ordering bug in SMC rx_curs_confirmed code, from Ursula Braun. 4) Revert some r8169 changes that are causing regressions, from Heiner Kallweit. 5) Fix spurious connection timeouts in netfilter nat code, from Florian Westphal. 6) SKB leak in tipc, from Hoang Le. 7) Short packet checkum issue in mlx4, similar to a previous mlx5 change, from Saeed Mahameed. The issue is that whilst padding bytes are usually zero, it is not guarateed and the hardware doesn't take the padding bytes into consideration when generating the checksum. 8) Fix various races in cls_tcindex, from Cong Wang. 9) Need to set stream ext to NULL before freeing in SCTP code, from Xin Long. 10) Fix locking in phy_is_started, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) net: ethernet: freescale: set FEC ethtool regs version net: hns: Fix object reference leaks in hns_dsaf_roce_reset() mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs net: phy: fix potential race in the phylib state machine net: phy: don't use locking in phy_is_started selftests: fix timestamping Makefile net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() net: fix possible overflow in __sk_mem_raise_allocated() dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit net: phy: fix interrupt handling in non-started states sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment net/mlx5e: XDP, fix redirect resources availability check net/mlx5: Fix a compilation warning in events.c net/mlx5: No command allowed when command interface is not ready net/mlx5e: Fix NULL pointer derefernce in set channels error flow netfilter: nft_compat: use-after-free when deleting targets team: avoid complex list operations in team_nl_cmd_options_set() net_sched: fix two more memory leaks in cls_tcindex net_sched: fix a memory leak in cls_tcindex ...

Rename include/{uapi => }/asm-generic/shmparam.h really

2019-02-13T00:33:18+00:00

Commit 36c0f7f0f899 ("arch: unexport asm/shmparam.h for all architectures") is different from the patch I submitted. My patch is this: https://lore.kernel.org/lkml/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com/T/#u The file renaming part: rename include/{uapi => }/asm-generic/shmparam.h (100%) was lost when it was picked up. I think it was an accident because Andrew did not say anything. Link: http://lkml.kernel.org/r/1549158277-24558-1-git-send-email-yamada.masahiro@socionext.com Fixes: 36c0f7f0f899 ("arch: unexport asm/shmparam.h for all architectures") Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

inet_diag: fix reporting cgroup classid and fallback to priority

2019-02-12T18:35:57+00:00

Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits. Extension INET_DIAG_CLASS_ID has not way to request from the beginning. This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions. Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class. Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen). So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use. Fixes: 0888e372c37f ("net: inet: diag: expose sockets cgroup classid") Signed-off-by: Konstantin Khlebnikov Signed-off-by: David S. Miller

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2019-02-07T08:05:28+00:00

Pull virtio fixes from Michael Tsirkin: "A small fix for a uapi header, and a fix for VDPA for non-x86 guests" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: drop internal struct from UAPI virtio: support VIRTIO_F_ORDER_PLATFORM

virtio: drop internal struct from UAPI

2019-02-05T20:29:48+00:00

There's no reason to expose struct vring_packed in UAPI - if we do we won't be able to change or drop it, and it's not part of any interface. Let's move it to virtio_ring.c Cc: Tiwei Bie Signed-off-by: Michael S. Tsirkin

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2019-02-01T18:39:24+00:00

Pull rdma fixes from Jason Gunthorpe: "Still not much going on, the usual set of oops and driver fixes this time: - Fix two uapi breakage regressions in mlx5 drivers - Various oops fixes in hfi1, mlx4, umem, uverbs, and ipoib - A protocol bug fix for hfi1 preventing it from implementing the verbs API properly, and a compatability fix for EXEC STACK user programs - Fix missed refcounting in the 'advise_mr' patches merged this cycle. - Fix wrong use of the uABI in the hns SRQ patches merged this cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociate IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start IB/uverbs: Fix ioctl query port to consider device disassociation RDMA/mlx5: Fix flow creation on representors IB/uverbs: Fix OOPs upon device disassociation RDMA/umem: Add missing initialization of owning_mm RDMA/hns: Update the kernel header file of hns IB/mlx5: Fix how advise_mr() launches async work RDMA/device: Expose ib_device_try_get(() IB/hfi1: Add limit test for RC/UC send via loopback IB/hfi1: Remove overly conservative VM_EXEC flag check IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOV RDMA/mlx5: Fix check for supported user flags when creating a QP

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2019-01-27T17:07:03+00:00

Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64